EN ISO 13628-9:2006

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 9: Remotely Operated Tool (ROT) intervention systems (ISO 13628-9:2000)

This standard gives requirements and recommendations for the design and operation of subsea production systems  Remotely  Operated Tool (ROT) intervention)

Erdöl- und Erdgasindustrie - Auslegung und Betrieb von Unterwasser-Produktionssystemen - Teil 9: ROT-Systeme (ISO 13628-9:2000)

Industries du pétrole et du gaz naturel - Conception et exploitation des systèmes de production immergés - Partie 9: Systèmes d'intervention utilisant des dispositifs à commande à distance (ROT) (ISO 13628-9:2000)

L'ISO 13628-9:2000 fournit les exigences fonctionnelles et les recommandations applicables aux systèmes d'intervention ROT et aux équipements d'interface des systèmes de production immergés utilisés dans les industries pétrolière et du gaz naturel.
L'ISO 13628-9:2000 ne couvre pas l'intervention avec opérateur et les systèmes d'intervention utilisant des véhicules commandés à distance (ROV) (par exemple pour le raccordement de conduites marines et le remplacement de modules). L'intervention en forage vertical, le contrôle des conduites d'écoulement internes, le fonctionnement de la tête de production et de son équipement sont également exclus de l'ISO 13628-9:2000.

Industrija za predelavo nafte in zemeljskega plina - Načrtovanje in delovanje podvodnih proizvodnih sistemov - 9. del: Sistemi za intervencijo z uporabo daljinsko vodenih orodij (ROT) (ISO 13628-9:2000)

General Information

• Status: Published
• Publication Date: 05-Dec-2006
• Withdrawal Date: 29-Jun-2007
• ICS: 75.180.10 - Exploratory, drilling and extraction equipment
• Technical Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Drafting Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 06-Dec-2006
• Due Date: 23-Jan-2008
• Completion Date: 06-Dec-2006
• Ref Project: SIST EN ISO 13628-9:2007 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 9: Remotely Operated Tool (ROT) intervention systems (ISO 13628-9:2000)

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2007
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD1DþUWRYDQMHLQGHORYDQMH
SRGYRGQLKSURL]YRGQLKVLVWHPRYGHO6LVWHPL]DLQWHUYHQFLMR]XSRUDER
GDOMLQVNRYRGHQLKRURGLM527,62
Petroleum and natural gas industries - Design and operation of subsea production
systems - Part 9: Remotely Operated Tool (ROT) intervention systems (ISO 13628-
9:2000)
Erdöl- und Erdgasindustrie - Auslegung und Betrieb von Unterwasser-
Produktionssystemen - Teil 9: ROT-Systeme (ISO 13628-9:2000)
Industries du pétrole et du gaz naturel - Conception et exploitation des systemes de
production immergés - Partie 9: Systemes d'intervention utilisant des dispositifs a
commande a distance (ROT) (ISO 13628-9:2000)
Ta slovenski standard je istoveten z: EN ISO 13628-9:2006
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 13628-9
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2006
ICS 75.180.10
English Version
Petroleum and natural gas industries - Design and operation of
subsea production systems - Part 9: Remotely Operated Tool
(ROT) intervention systems (ISO 13628-9:2000)
Industries du pétrole et du gaz naturel - Conception et Erdöl- und Erdgasindustrie - Auslegung und Betrieb von
exploitation des systèmes de production immergés - Partie Unterwasser-Produktionssystemen - Teil 9: ROT-Systeme
9: Systèmes d'intervention utilisant des dispositifs à (ISO 13628-9:2000)
commande à distance (ROT) (ISO 13628-9:2000)
This European Standard was approved by CEN on 13 November 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13628-9:2006: E
worldwide for CEN national Members.

Foreword
The text of ISO 13628-9:2000 has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum and natural gas industries” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 13628-
9:2006 by Technical Committee CEN/TC 12 "Materials, equipment and offshore structures for
petroleum, petrochemical and natural gas industries", the secretariat of which is held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by June 2007, and conflicting national
standards shall be withdrawn at the latest by June 2007.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Endorsement notice
The text of ISO 13628-9:2000 has been approved by CEN as EN ISO 13628-9:2006 without any
modifications.
INTERNATIONAL ISO
STANDARD 13628-9
First edition
2000-06-15
Petroleum and natural gas industries —
Design and operation of subsea production
systems —
Part 9:
Remotely Operated Tool (ROT) intervention
systems
Industries du pétrole et du gaz naturel — Conception et exploitation des
systèmes de production immergés —
Partie 9: Systèmes d'intervention utilisant des dispositifs à commande à
distance (ROT)
Reference number
ISO 13628-9:2000(E)
©
ISO 2000
ISO 13628-9:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 734 10 79
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
ii © ISO 2000 – All rights reserved

ISO 13628-9:2000(E)
Contents Page
Foreword.iv
Introduction.v
1 Scope .1
2 Terms, definitions and abbreviated terms .1
2.1 Terms and definitions .1
2.2 Abbreviated terms .2
3 System selection.3
3.1 General.3
3.2 Deck handling equipment .5
3.3 Intervention control system (ICS) .5
3.4 Deployment/landing equipment .7
3.5 Tools for primary intervention tasks .7
4 Functional requirements and recommendations .8
4.1 General.8
4.2 Deployment and landing requirements and recommendations .9
4.3 Surface equipment .10
4.4 Control system requirements and recommendations .12
4.5 Tie-in operations.15
4.6 Module replacement .18
5 Test requirements and recommendations .19
6 Interfaces.19
Bibliography.24
ISO 13628-9:2000(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 13628 may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 13628-9 was prepared by Technical Committee ISO/TC 67, Materials, equipment and
offshore structures for petroleum and natural gas industries, Subcommittee SC 4, Drilling and production
equipment.
ISO 13628 consists of the following parts, under the general title Petroleum and natural gas industries — Design
and operation of subsea production systems:
� Part 1: General requirements and recommendations
� Part 2: Flexible pipe systems for subsea and marine applications
� Part 3: Through flowline (TFL) systems
� Part 4: Subsea wellhead and tree equipment
� Part 5: Subsea control umbilicals
� Part 6: Subsea production control systems
� Part 7: Workover/completion riser systems
� Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems
� Part 9: Remotely Operated Tool (ROT) intervention systems
iv © ISO 2000 – All rights reserved

ISO 13628-9:2000(E)
Introduction
This part of ISO 13628 is considered to be closely related to ISO 13628-1 and ISO 13628-8. ISO 13628-1 provides
general requirements and overall recommendations for development of complete subsea production systems for
the petroleum and natural gas industries, from design to decommissioning, and gives a description of how the ROT
intervention systems relate to the total subsea production system.
The objective of subsea intervention systems, including vessel and deck handling equipment, is to facilitate safe
and efficient intervention on subsea installations.
INTERNATIONAL STANDARD ISO 13628-9:2000(E)
Petroleum and natural gas industries — Design and operation of
subsea production systems —
Part 9:
Remotely Operated Tool (ROT) intervention systems
1 Scope
This part of ISO 13628 provides functional requirements and recommendations for ROT intervention systems and
interfacing equipment on subsea production systems for the petroleum and natural gas industries.
This part of ISO 13628 does not cover manned intervention and ROV-based intervention systems (e.g. for tie-in of
sealines and module replacement). Vertical wellbore intervention, internal flowline inspection, tree running and tree
running equipment are also excluded from this part of ISO 13628.
2 Terms, definitions and abbreviated terms
For the purposes of this part of ISO 13628, the following terms, definitions and abbreviated terms apply.
2.1 Terms and definitions
2.1.1
subsea intervention
all work carried out subsea
2.1.2
primary intervention
all work carried out during the scheduled intervention task
2.1.3
ROT system
dedicated, unmanned, subsea tools used for remote installation or module replacement tasks that require lift
capacity beyond that of free-swimming ROV systems
NOTE The ROT system comprises wire-suspended tools with control system and support-handling system for performing
dedicated subsea intervention tasks. They are usually deployed on liftwires or a combined liftwire/umbilical. Lateral guidance
may be via guidewires, dedicated thrusters or ROV assistance.
2.1.4
deployment system
all equipment involved in the launch and recovery of the ROT system
2.1.5
heave-compensated system
system that limits the effect of vertical vessel motion on the deployed ROT system
ISO 13628-9:2000(E)
2.1.6
skid system
storage, transportation, lifting and testing frames to facilitate movement of the ROT systems and the modules and
components to be replaced or installed
NOTE Skids are used in comb
...