EN 13256:2000/A1:2005

Geotextiles and geotextile-related products - Required characteristics for use in the construction of tunnels and underground structures

This European Standard specifies the relevant characteristics of geotextiles and geotextile-related products used in the construction of tunnels and underground structures, and the appropriate test  methods to determine these characteristics. The intended use of these geotextiles or geotextile-related products is to protect geomembranes used in tunnels and underground structures. This standard is not applicable to geomembranes. This standard provides for the evaluation of conformity of the product to this European Standard and for factory production control procedures. This standard defines requirements to be met by manufacturers and distributors with regard to the presentation of product properties.  NOTE 1  Particular application cases or national specifications may contain requirements regarding additional properties and - preferably standardised - test methods, if they are technically relevant and not conflicting with European Standards. NOTE 2  This European Standard may be used to derive design values by taking into account factors within the context of the definitions given in Eurocode 7 (ENV 1997-1), e.g. factors of safety. The design life of the product should be determined, since its function may be temporary, as a construction expediency, or permanent, for the lifetime of the structure.

Geotextilien und geotextilverwandte Produkte - Geforderte Eigenschaften für die Anwendung im Tunnelbau und in Tiefbauwerken

Géotextiles et produits apparentés - Caractéristiques requises pour l'utilisation dans la construction de tunnels et de structures souterraines

Geotekstilije in geotekstilijam sorodni izdelki - Zahtevane lastnosti za uporabo pri gradnji predorov in pri podzemnih gradnjah

General Information

• Status: Withdrawn
• Publication Date: 25-Jan-2005
• Withdrawal Date: 14-Jan-2014
• ICS: 59.080.70 - Geotextiles
• Technical Committee: CEN/TC 189 - Geotextiles and geotextile-related products
• Drafting Committee: CEN/TC 189 - Geotextiles and geotextile-related products
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Jan-2014
• Completion Date: 15-Jan-2014
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/107 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on geotextiles
• Ref Project: SIST EN 13256:2001/A1:2005 - Geotextiles and geotextile-related products - Required characteristics for use in the construction of tunnels and underground structures

Relations

• Replaced By: EN 13256:2014 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
• Effective Date: 22-Jan-2014
• Amends: EN 13256:2000 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13256:2001/A1:2005
01-maj-2005
Geotekstilije in geotekstilijam sorodni izdelki - Zahtevane lastnosti za uporabo pri
gradnji predorov in pri podzemnih gradnjah
Geotextiles and geotextile-related products - Required characteristics for use in the
construction of tunnels and underground structures
Geotextilien und geotextilverwandte Produkte - Geforderte Eigenschaften für die
Anwendung im Tunnelbau und in Tiefbauwerken
Géotextiles et produits apparentés - Caractéristiques requises pour l'utilisation dans la
construction de tunnels et de structures souterraines
Ta slovenski standard je istoveten z: EN 13256:2000/A1:2005
ICS:
59.080.70 Geotekstilije Geotextiles
93.060 Gradnja predorov Tunnel construction
SIST EN 13256:2001/A1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13256:2001/A1:2005

---------------------- Page: 2 ----------------------

SIST EN 13256:2001/A1:2005
EUROPEAN STANDARD
EN 13256:2000/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2005
ICS 59.080.70
English version
Geotextiles and geotextile-related products - Required
characteristics for use in the construction of tunnels and
underground structures
Géotextiles et produits apparentés - Caractéristiques Geotextilien und geotextilverwandte Produkte - Geforderte
requises pour l'utilisation dans la construction de tunnels et Eigenschaften für die Anwendung im Tunnelbau und in
de structures souterraines Tiefbauwerken
This amendment A1 modifies the European Standard EN 13256:2000; it was approved by CEN on 15 December 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13256:2000/A1:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13256:2001/A1:2005
EN 13256:2000/A1:2005 (E)

Foreword

This document (EN 13256:2000/A1:2005) has been prepared by Technical Committee CEN/TC 189
"Geosynthetics", the secretariat of which is held by IBN.

This Amendment to the European Standard EN 13256:2000 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by July 2005, and
conflicting national standards shall be withdrawn at the latest by July 2005.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia,
Spain, Sweden, Switzerland and United Kingdom.
2

---------------------- Page: 4 ----------------------

SIST EN 13256:2001/A1:2005
EN 13256:2000/A1:2005 (E)


1 Modification to Clause 2

include reference to:
"ISO 10390:1994, Soil quality – Determination of pH"

add reference to: "EN 14574 - Geosynthetics - Determination of the pyramid puncture resistance of
supported geosynthetics"

2 Modification to Subclause 4.1, Table 1

sub (9) protection efficiency, column "Test method": replace by: "EN 13719 and EN 14574"

3 Modification to Subclause 5.2, Note 1

replace by:
"This method should not be used for on-site quality control purposes. On-site control procedures are
described in CEN/TR 15019.”

4 Modification to Subclause 5.4

th
add at the end of the 4 paragraph:
"The tasks of the manufacturer shall be described in detail including the type of tests to be performed
and the frequency of these tests (see also Annex A, Clause A.2)."

5 Modification to Subclause 5.5

replace by:
"Inspection of the factory and of the factory production control shall be ma
...