Binders for paints and varnishes - Alkyd resins - Part 3: Determination of unsaponifiable matter content (ISO 6744-3:1999)

This part of ISO 6744 specifies a method for determining the unsaponifiable matter content of alkyd resins. It is
always used in conjunction with ISO 6744-2, which describes the first step of the analysis.
It is not applicable to modified alkyd resins (see 3.2 of ISO 6744-1:1999).

Bindemittel für Beschichtungsstoffe - Alkydharze - Teil 3: Bestimmung des Gehaltes an unverseifbaren Bestandteilen (ISO 6744-3:1999)

Liants pour peintures et vernis - Résines alkydes - Partie 3: Détermination de la teneur en matière insaponifiable (ISO 6744-3:1999)

La présente partie de l'ISO 6744 spécifie une méthode permettant de déterminer la teneur en matière
insaponifiable des résines alkydes. Elle est toujours utilisée en association avec l'ISO 6744?2, qui décrit la
première étape de l'analyse.
Elle n'est pas applicable aux résines alkydes modifiées (voir 3.2 de l'ISO 6744-1:1999).

Veziva za barve in lake - Alkidne smole - 3. del: Določevanje neumiljivih snovi (ISO 6744-3:1999)

General Information

Status
Published
Publication Date
25-May-2004
Current Stage
9093 - Decision to confirm - Review Enquiry
Due Date
11-Sep-2009
Completion Date
11-Sep-2009

Buy Standard

Standard
EN ISO 6744-3:2004
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Standard
EN ISO 6744-3:2004
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 6744-3:2004
01-julij-2004

Veziva za barve in lake - Alkidne smole - 3. del: Določevanje neumiljivih snovi (ISO

6744-3:1999)

Binders for paints and varnishes - Alkyd resins - Part 3: Determination of unsaponifiable

matter content (ISO 6744-3:1999)

Bindemittel für Beschichtungsstoffe - Alkydharze - Teil 3: Bestimmung des Gehaltes an

unverseifbaren Bestandteilen (ISO 6744-3:1999)

Liants pour peintures et vernis - Résines alkydes - Partie 3: Détermination de la teneur

en matiere insaponifiable (ISO 6744-3:1999)
Ta slovenski standard je istoveten z: EN ISO 6744-3:2004
ICS:
87.060.20 Veziva Binders
SIST EN ISO 6744-3:2004 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 6744-3:2004
---------------------- Page: 2 ----------------------
SIST EN ISO 6744-3:2004
EUROPEAN STANDARD
EN ISO 6744-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2004
ICS 87.060.20
English version
Binders for paints and varnishes - Alkyd resins - Part 3:
Determination of unsaponifiable matter content (ISO 6744-
3:1999)

Liants pour peintures et vernis - Résines alkydes - Partie 3: Bindemittel für Beschichtungsstoffe - Alkydharze - Teil 3:

Détermination de la teneur en matière insaponifiable (ISO Bestimmung des Gehaltes an unverseifbaren Bestandteilen

6744-3:1999) (ISO 6744-3:1999)
This European Standard was approved by CEN on 8 April 2004.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official

versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,

Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,

Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels

© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6744-3:2004 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 6744-3:2004
EN ISO 6744-3:2004 (E)
Foreword

The text of ISO 6744-3:1999 has been prepared by Technical Committee ISO/TC 35 "Paints and

varnishes” of the International Organization for Standardization (ISO) and has been taken over

as EN ISO 6744-3:2004 by Technical Committee CEN/TC 139 "Paints and varnishes", the

secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of

an identical text or by endorsement, at the latest by November 2004, and conflicting national

standards shall be withdrawn at the latest by November 2004.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of

the following countries are bound to implement this European Standard: Austria, Belgium,

Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,

Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice

The text of ISO 6744-3:1999 has been approved by CEN as EN ISO 6744-3:2004 without any

modifications.

NOTE Normative references to International Standards are listed in Annex ZA (normative).

---------------------- Page: 4 ----------------------
SIST EN ISO 6744-3:2004
EN ISO 6744-3:2004 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications

This European Standard incorporates by dated or undated reference, provisions from other

publications. These normative references are cited at the appropriate places in the text and the

publications are listed hereafter. For dated references, subsequent amendments to or revisions of

any of these publications apply to this European Standard only when incorporated in it by

amendment or revision. For undated references the latest edition of the publication referred to

applies (including amendments).

NOTE Where an International Publication has been modified by common modifications, indicated

by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 3696 1987 Water for analytical laboratory use - EN ISO 3696 1995
Specification and test methods
ISO 15528 2000 Paints, varnishes and raw materials EN ISO 15528 2000
for paints and varnishes - Sampling
---------------------- Page: 5 ----------------------
SIST EN ISO 6744-3:2004
---------------------- Page: 6 ----------------------
SIST EN ISO 6744-3:2004
INTERNATIONAL ISO
STANDARD 6744-3
First edition
1999-12-01
Binders for paints and varnishes — Alkyd
resins —
Part 3:
Determination of unsaponifiable matter
content
Liants pour peintures et vernis — Résines alkydes —
Partie 3: Détermination de la teneur en matière insaponifiable
Reference number
ISO 6744-3:1999(E)
ISO 1999
---------------------- Page: 7 ----------------------
SIST EN ISO 6744-3:2004
ISO 6744-3:1999(E)
PDF disclaimer

This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not

be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this

file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this

area.
Adobe is a trademark of Adobe Systems Incorporated.

Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters

were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event

that a problem relating to it is found, please inform the Central Secretariat at the address given below.

© ISO 1999

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic

or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body

in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 734 10 79
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 1999 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 6744-3:2004
ISO 6744-3:1999(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO

member bodies). The work of preparing International Standards is normally carried out through ISO technical

committees. Each member body interested in a subject for which a technical committee has been established has

the right to be represented on that committee. International organizations, governmental and non-governmental, in

liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical

Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.

Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.

Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this part of ISO 6744 may be the subject of patent

rights. ISO shall not be held responsible for identifying any or all such patent rights.

International Standard ISO 6744-3 was prepared by Technica
...

SLOVENSKI STANDARD
SIST EN ISO 6744-3:2004
01-julij-2004
Binders for paints and varnishes - Alkyd resins - Part 3: Determination of
unsaponifiable matter content (ISO 6744-3:1999)

Binders for paints and varnishes - Alkyd resins - Part 3: Determination of unsaponifiable

matter content (ISO 6744-3:1999)

Bindemittel für Beschichtungsstoffe - Alkydharze - Teil 3: Bestimmung des Gehaltes an

unverseifbaren Bestandteilen (ISO 6744-3:1999)

Liants pour peintures et vernis - Résines alkydes - Partie 3: Détermination de la teneur

en matiere insaponifiable (ISO 6744-3:1999)
Ta slovenski standard je istoveten z: EN ISO 6744-3:2004
ICS:
87.060.20 Veziva Binders
SIST EN ISO 6744-3:2004 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 6744-3:2004
---------------------- Page: 2 ----------------------
SIST EN ISO 6744-3:2004
EUROPEAN STANDARD
EN ISO 6744-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2004
ICS 87.060.20
English version
Binders for paints and varnishes - Alkyd resins - Part 3:
Determination of unsaponifiable matter content (ISO 6744-
3:1999)

Liants pour peintures et vernis - Résines alkydes - Partie 3: Bindemittel für Beschichtungsstoffe - Alkydharze - Teil 3:

Détermination de la teneur en matière insaponifiable (ISO Bestimmung des Gehaltes an unverseifbaren Bestandteilen

6744-3:1999) (ISO 6744-3:1999)
This European Standard was approved by CEN on 8 April 2004.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official

versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,

Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,

Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels

© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6744-3:2004 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 6744-3:2004
EN ISO 6744-3:2004 (E)
Foreword

The text of ISO 6744-3:1999 has been prepared by Technical Committee ISO/TC 35 "Paints and

varnishes” of the International Organization for Standardization (ISO) and has been taken over

as EN ISO 6744-3:2004 by Technical Committee CEN/TC 139 "Paints and varnishes", the

secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of

an identical text or by endorsement, at the latest by November 2004, and conflicting national

standards shall be withdrawn at the latest by November 2004.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of

the following countries are bound to implement this European Standard: Austria, Belgium,

Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,

Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice

The text of ISO 6744-3:1999 has been approved by CEN as EN ISO 6744-3:2004 without any

modifications.

NOTE Normative references to International Standards are listed in Annex ZA (normative).

---------------------- Page: 4 ----------------------
SIST EN ISO 6744-3:2004
EN ISO 6744-3:2004 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications

This European Standard incorporates by dated or undated reference, provisions from other

publications. These normative references are cited at the appropriate places in the text and the

publications are listed hereafter. For dated references, subsequent amendments to or revisions of

any of these publications apply to this European Standard only when incorporated in it by

amendment or revision. For undated references the latest edition of the publication referred to

applies (including amendments).

NOTE Where an International Publication has been modified by common modifications, indicated

by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 3696 1987 Water for analytical laboratory use - EN ISO 3696 1995
Specification and test methods
ISO 15528 2000 Paints, varnishes and raw materials EN ISO 15528 2000
for paints and varnishes - Sampling
---------------------- Page: 5 ----------------------
SIST EN ISO 6744-3:2004
---------------------- Page: 6 ----------------------
SIST EN ISO 6744-3:2004
INTERNATIONAL ISO
STANDARD 6744-3
First edition
1999-12-01
Binders for paints and varnishes — Alkyd
resins —
Part 3:
Determination of unsaponifiable matter
content
Liants pour peintures et vernis — Résines alkydes —
Partie 3: Détermination de la teneur en matière insaponifiable
Reference number
ISO 6744-3:1999(E)
ISO 1999
---------------------- Page: 7 ----------------------
SIST EN ISO 6744-3:2004
ISO 6744-3:1999(E)
PDF disclaimer

This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not

be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this

file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this

area.
Adobe is a trademark of Adobe Systems Incorporated.

Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters

were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event

that a problem relating to it is found, please inform the Central Secretariat at the address given below.

© ISO 1999

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic

or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body

in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 734 10 79
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 1999 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 6744-3:2004
ISO 6744-3:1999(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO

member bodies). The work of preparing International Standards is normally carried out through ISO technical

committees. Each member body interested in a subject for which a technical committee has been established has

the right to be represented on that committee. International organizations, governmental and non-governmental, in

liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical

Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.

Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.

Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this part of ISO 6744 may be the subject of patent

rights. ISO shall not be held responsible for identifying any or all such patent rights.

International Standard ISO 6744-3 was prepa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.