EN 13766:2018/prA1

Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification

This document specifies requirements for two types of thermoplastic multi-layer (non-vulcanized) transfer hoses and hose assemblies for carrying liquefied petroleum gas and liquefied natural gas. Each type is subdivided into two classes, one for onshore duties, and the other for offshore.
This document is applicable for hose sizes from 25 mm to 250 mm, working pressures from 10,5 bar to 25 bar and operating temperatures from - 196 °C to + 45 °C.
NOTE   Offshore LNG hose assemblies are also specified in EN 1474-2 [1].

Thermoplastische, mehrlagige (nicht vulkanisierte) Schläuche und Schlauchleitungen für die Förderung von Flüssiggas und verflüssigtem Erdgas - Spezifikation

Tuyaux et flexibles en thermoplastique multicouches (non vulcanisés) utilisés pour le dépotage de gaz pétrolier liquide et gaz naturel liquifié - Spécification

Plastomerne večslojne (nevulkanizirane) cevi in cevni priključki za pretok utekočinjenega naftnega plina in utekočinjenega zemeljskega plina - Specifikacija - Dopolnilo A1

General Information

• Status: Not Published
• ICS: 23.040.70 - Hoses and hose assemblies
• Technical Committee: CEN/TC 218 - Rubber and plastics hoses and hose assemblies
• Drafting Committee: CEN/TC 218/WG 1 - Rubber and plastics hoses and hose assemblies for industrial, chemical and petrochemical applications
• Ref Project: SIST EN 13766:2019/oprA1:2019 - Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification

Relations

• Merged Into: EN 13766:2018+A1:2020 - Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
• Effective Date: 18-Jan-2023
• Amends: EN 13766:2018 - Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
• Effective Date: 24-Apr-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2019
Plastomerne večslojne (nevulkanizirane) cevi in cevni priključki za pretok
utekočinjenega naftnega plina in utekočinjenega zemeljskega plina - Specifikacija
- Dopolnilo A1
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of
liquid petroleum gas and liquefied natural gas - Specification
Thermoplastische, mehrlagige (nicht vulkanisierte) Schläuche und Schlauchleitungen für
die Förderung von Flüssiggas und verflüssigtem Erdgas - Spezifikation
Tuyaux et flexibles en thermoplastique multicouches (non vulcanisés) utilisés pour le
dépotage de gaz pétrolier liquide et gaz naturel liquifié - Spécification
Ta slovenski standard je istoveten z: EN 13766:2018/prA1
ICS:
75.200 Oprema za skladiščenje Petroleum products and
nafte, naftnih proizvodov in natural gas handling
zemeljskega plina equipment
83.140.30 Polimerne cevi in fitingi za Plastics pipes and fittings for
snovi, ki niso tekočine non fluid use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 13766:2018
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
September 2019
ICS 23.040.70
English Version
Thermoplastic multi-layer (non-vulcanized) hoses and
hose assemblies for the transfer of liquid petroleum gas
and liquefied natural gas - Specification
Tuyaux et flexibles en thermoplastique multicouches Thermoplastische, mehrlagige (nicht vulkanisierte)
(non vulcanisés) utilisés pour le dépotage de gaz Schläuche und Schlauchleitungen für die Förderung
pétrolier liquide et gaz naturel liquifié - Spécification von Flüssiggas und verflüssigtem Erdgas -
Spezifikation
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 218.

This draft amendment A1, if approved, will modify the European Standard EN 13766:2018. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denma
...