EN ISO 105-Z02:1995
(Main)Textiles - Tests for colour fastness - Part Z02: Colour fastness to metals in the dyebath: Iron and copper (ISO 105-Z02:1993)
Textiles - Tests for colour fastness - Part Z02: Colour fastness to metals in the dyebath: Iron and copper (ISO 105-Z02:1993)
The principle of the method specified is assessing the difference in colour between dyeings made in the presence and in the absence of salts of the metal present (due to its use in the construction of dying machinery or resulting from water and steam used in dyeing) with the grey scale.
Textilien - Farbechtheitsprüfungen - Teil Z02: Farbechtheit gegenüber Metallen im Färbebad: Eisen und Kupfer (ISO 105-Z02:1993)
Dieser Teil von ISO 105 beschreibt ein Prüfverfahren zur Bestimmung der Änderung der Farbe, die ein Farbstoff beim Färben in Gegenwart von Metallen (Eisen, Kupfer oder deren Salze), wie sie aus Färbeapparaten und Rohrleitungen oder durch Wasser bzw. den Dampf in das Färbebad gelangen können, erleidet.
Textiles - Essais de solidité des teintures - Partie Z02: Solidité des teintures aux métaux dans les bains de teinture: Fer et cuivre (ISO 105-Z02:1993)
La présente partie de l'ISO 105 prescrit une méthode pour la détermination de l'effet produit sur la nuance d'un colorant par la présence de métaux (fer et cuivre ou leurs sels) soit dans le matériel de teinture, soit dans l'eau ou la vapeur utilisée pour la teinture.
Tekstilije - Preskušanje barvne obstojnosti - Del Z02: Barvna obstojnost proti kovinam v barvalni kopeli: železo in baker (ISO 105-Z02:1993)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-1999
Tekstilije - Preskušanje barvne obstojnosti - Del Z02: Barvna obstojnost proti
kovinam v barvalni kopeli: železo in baker (ISO 105-Z02:1993)
Textiles - Tests for colour fastness - Part Z02: Colour fastness to metals in the dyebath:
Iron and copper (ISO 105-Z02:1993)
Textilien - Farbechtheitsprüfungen - Teil Z02: Farbechtheit gegenüber Metallen im
Färbebad: Eisen und Kupfer (ISO 105-Z02:1993)
Textiles - Essais de solidité des teintures - Partie Z02: Solidité des teintures aux métaux
dans les bains de teinture: Fer et cuivre (ISO 105-Z02:1993)
Ta slovenski standard je istoveten z: EN ISO 105-Z02:1995
ICS:
59.080.01 Tekstilije na splošno Textiles in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
INTERNATIONAL
STANDARD
Second edition
1993-10-01
Textiles - Tests for colour fastness -
Part 202:
Colour fastness to metals in the dye-bath: Iron
and topper
Textiles - Essais de soliditk des teintures -
Partie 202: Solidite des teintures aux m&aux dans les bains de teinture:
Fer et cuivre
Reference number
ISO 105-ZO2:1993(E)
ISO 105~202:1993(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 105-202 was prepared by Technical Committee
lSO/rC 38, Textiles, Sub-Committee SC 1, Tests for coloured textiles and
coloran ts.
This second edition cancels and replaces the first edition (included in
ISO 105-Z:1978), of which it constitutes a minor revision.
ISO 105 was previously published in thirteen “Parts”, each designated by
a letter (e.g. “Part A”), with publication dates between 1978 and 1985.
Esch part contained a series of “sections”, each designated by the re-
spective part letter and by a two-digit serial number (e.g. “Section AO1 “).
These sections are now being republished as separate documents, them-
selves designated “Parts” but retaining
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.