Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system

This European Standard specifies the requirements for solid-wall pipes, fittings and the system of piping systems made from mineral modified polypropylene materials (PP-MD) in the field of non-pressure underground drainage and sewerage outside the building structure (application area code "U"), and non- pressure underground drainage and sewerage for both buried in ground within the building structure (application area code "D") and outside the building structure.
This is reflected in the marking of products by "U" and "UD".
It also specifies the test parameters for the test methods referred to in this European Standard.
This European Standard covers a range of nominal sizes, a range of pipe series/stiffness classes and gives recommendations concerning colours.
NOTE 1   It is the responsibility of the purchaser or specifier to make the appropriate selection from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes.
In conjunction with Part 2 and Part 3 of EN 14758 (see Foreword) it is applicable to PP-MD pipes and fittings, their elastomeric sealing ring joints and to joints with components of other plastics and non-plastics materials intended to be used for buried piping systems for non-pressure underground drainage and sewerage.
This European Standard is applicable to PP-MD pipes with or without an integral socket.
NOTE 2   The fittings can be manufactured by injection-moulding or be fabricated from pipes and/or mouldings.
NOTE 3   Requirements and limiting values for application area code "D" are given in Table 4, Table 7 and Table 13.
NOTE 4   Pipes, fittings and other components conforming to any of the plastics product standards listed in Annex B can be used with pipes and fittings conforming to this European Standard, when they conform to the requirements for joint dimensions given in Clause 6 and to the requirements of Table 13.

Kunststoff-Rohrleitungssysteme für erdverlegte drucklose Abwasserkanäle und -leitungen - Polypropylen mit mineralischen Additiven (PP-MD) - Teil 1: Anforderungen an Rohre, Formstücke und das Rohrleitungssystem

Diese Europäische Norm legt für Rohrleitungssysteme aus mineralverstärktem Polypropylen (PP MD) Anforderungen an Vollwandrohre, Formstücke und das Rohrleitungssystem für Abwasserkanäle und  leitungen fest, die in erdverlegten Schwerkraftentwässerungssystemen außerhalb der Gebäudestruktur (Anwendungskennzeichen "U") und sowohl innerhalb (Anwendungskennzeichen "D") als auch außerhalb der Gebäudestruktur eingesetzt werden.
Die Wahl des Anwendungsgebietes wird durch die Kennzeichnung der Erzeugnisse mit "U" bzw. "UD" angezeigt.
Sie legt auch die Prüfparameter für die Prüfverfahren fest, auf die in dieser Europäischen Norm verwiesen wird.
Diese Europäische Norm enthält eine Reihe von Nennweiten sowie Rohrreihen/Steifigkeitsklassen und gibt Empfehlungen hinsichtlich der Einfärbung.
ANMERKUNG 1   Der Anwender oder Auftraggeber ist unter Berücksichtigung der eigenen Anforderungen sowie der geltenden nationalen Festlegungen und Verlegepraktiken für die zutreffende Auswahl dieser Kriterien verantwortlich.
Zusammen mit Teil 2 und Teil 3 der EN 14758 (siehe Vorwort) gilt dieser Teil für Rohre und Formstücke aus PP MD, für deren Verbindungen mit elastomeren Dichtringen sowie für Verbindungen mit Rohrleitungsteilen aus anderen Kunststoffen oder aus nicht aus Kunststoffen bestehenden Rohrwerkstoffen, die für erdverlegte drucklose Abwasserkanäle und  leitungen vorgesehen sind.
Diese Europäische Norm ist für Rohre aus PP MD sowohl mit als auch ohne angeformte Muffe anwendbar.
ANMERKUNG 2   Die Formstücke können im Spritzgießverfahren oder aus Rohren und/oder aus Spritzgussteilen hergestellt sein.
ANMERKUNG 3   Anforderungen und Grenzwerte für Anwendungsgebiete mit Anwendungskennzeichen "D" sind in Tabelle 4, Tabelle 7 und Tabelle 13 aufgeführt.
ANMERKUNG 4   Rohre, Formstücke oder andere Rohrleitungsteile, die einer der in Anhang B aufgeführten Produktnormen für Kunststoffprodukte entsprechen, können mit Rohren und Formstücken nach dieser Europäischen Norm verwendet werden, sofern sie die Anforderungen an die Maße der Verbindungen nach Abschnitt 6 sowie die Anforderungen nach Tabelle 13 erfüllen.

Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Polypropylène avec modificateurs minéraux (PP-MD) - Partie 1: Spécifications pour les tubes, les raccords et le système

La présente Norme européenne spécifie les exigences pour les tubes, les raccords et le système de
canalisations à paroi compacte, fabriqués à partir de polypropylène avec modificateurs minéraux (PP-MD) et
destinés à être utilisés pour les branchements et les collecteurs d’assainissement enterrés sans pression à
l’extérieur de la structure du bâtiment (code de zone d’application « U »), et pour les branchements et les
collecteurs d’assainissement enterrés sans pression aussi bien à l’intérieur de la structure du bâtiment (code
de zone d’application « D ») qu’à l’extérieur de celle-ci.
Ces informations sont précisées dans le marquage des produits par les lettres « U » et « UD ».
Elle spécifie également les paramètres d’essai pour les méthodes d’essai référencées dans cette Norme
européenne.
La présente Norme européenne couvre une gamme de dimensions nominales, une gamme de séries de
tubes/classes de rigidité et donne des recommandations concernant les couleurs.
NOTE 1 Il est de la responsabilité de l’acheteur ou du prescripteur d’effectuer les choix appropriés à partir de ces
données, en tenant compte des exigences particulières et de toute réglementation nationale applicable ainsi que des
pratiques ou codes de pose.
En relation avec la Partie 2 et la Partie 3 de l’EN 14758 (voir l’Avant-propos), elle s’applique aux tubes et aux
raccords en PP-MD, à leurs assemblages à bague d’étanchéité en élastomère et aux assemblages avec des
composants en matières plastiques et non plastiques différentes destinés à être utilisés dans les systèmes de
canalisations enterrés pour les branchements et l’assainissement sans pression.
La présente Norme européenne est applicable aux tubes PP-MD avec et sans emboîtures.
NOTE 2 Les raccords peuvent être fabriqués par moulage par injection ou être façonnés à partir de tubes et/ou de
pièces moulées.
NOTE 3 Les exigences et les valeurs limites pour le code de zone d’application « D » sont données dans le Tableau 4,
le Tableau 7 et le Tableau 13.
NOTE 4 Les tubes, les raccords et autres composants conformes à l’une des normes de produits plastiques
énumérées dans l’Annexe B peuvent être utilisés avec des tubes et des raccords conformes à cette Norme
européenne dans la mesure où ils satisfont aux exigences relatives aux dimensions d’assemblages données
dans l’Article 6 et aux exigences du Tableau 13.

Cevni sistemi iz polimernih materialov za odvodnjavanje in kanalizacijo, ki delujejo po težnostnem principu - Polipropilen z mineralnimi modifikatorji (PP-MD) - 1. del: Specifikacije za cevi, fitinge in cevni sistem

Ta evropski standard določa zahteve za trde cevi, fitinge in cevne sisteme iz polipropilena z mineralnimi modifikatorji (PP-MD) na področju sistemov za odvodnjavanje in kanalizacijo, ki delujejo po težnostnem principu in so položeni v zemljo zunaj stavbe (koda območja uporabe »U«), ter sistemov za odvodnjavanje in kanalizacijo, ki delujejo po težnostnem principu in so položeni v zemljo, za vkopane sisteme v stavbi (koda območja uporabe »D«) in zunaj stavbe.
To je razvidno iz oznak »U« in »UD« na izdelkih.
Določa tudi preskusne parametre za preskusne metode iz tega evropskega standarda.
Ta evropski standard zajema različne nazivne velikosti, več sklopov cevi/razredov togosti in vsebuje priporočila o barvah.
OPOMBA 1: Za ustrezno izbiro med temi vidiki je odgovoren kupec ali specifikator, pri čemer mora upoštevati konkretne zahteve ter vse pomembne nacionalne predpise in prakse ali kodekse vgradnje.
Skupaj z 2. in 3. delom standarda EN 14758 (glejte Predgovor) se uporablja za cevi in fitinge iz polipropilena z mineralnimi modifikatorji, njihove elastomerne tesnilne obroče in spoje s komponentami iz drugih polimernih in nepolimernih materialov, namenjenih uporabi za vkopane cevne sisteme za odvodnjavanje in kanalizacijo, ki delujejo po težnostnem principu in so položeni v zemljo.
Ta evropski standard se uporablja za cevi iz polipropilena z mineralnimi modifikatorji z oglavki ali brez njih.
OPOMBA 2: Fitingi se lahko proizvedejo z injekcijskim brizganjem ali so izdelani iz cevi in/ali oblikovancev.
OPOMBA 3: Zahteve in mejne vrednosti za uporabo kode območja uporabe »D« so navedene v preglednicah 4, 7 in 13.
OPOMBA 4: Cevi, fitingi in drugi sestavni deli, ki so skladni s katerim koli standardom za izdelek iz polimernih materialov iz dodatka B, se lahko uporabljajo s cevmi in fitingi, ki so skladni s tem evropskim standardom, če izpolnjujejo zahteve v zvezi z velikostmi spojev iz točke 6 in zahteve iz preglednice 13.

General Information

Status
Withdrawn
Publication Date
06-Mar-2012
Withdrawal Date
04-Apr-2023
Current Stage

Relations

Buy Standard

Standard
EN 14758-1:2012
English language
34 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k FprEN 14758-1:2011
English language
34 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cevni sistemi iz polimernih materialov za odvodnjavanje in kanalizacijo, ki delujejo po težnostnem principu - Polipropilen z mineralnimi modifikatorji (PP-MD) - 1. del: Specifikacije za cevi, fitinge in cevni sistemKunststoff-Rohrleitungssysteme für erdverlegte Abwasserkanäle und -leitungen - Polypropylen mit mineralischen Additiven (PP-MD) - Teil 1: Anforderungen an Rohre, Formstücke und das RohrleitungssystemSystèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Polypropylène avec modificateurs minéraux (PP-MD) - Partie 1: Spécifications pour les tubes, les raccords et le systèmePlastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system93.030Zunanji sistemi za odpadno vodoExternal sewage systems23.040.20Cevi iz polimernih materialovPlastics pipesICS:Ta slovenski standard je istoveten z:EN 14758-1:2012SIST EN 14758-1:2012en,fr,de01-maj-2012SIST EN 14758-1:2012SLOVENSKI
STANDARDSIST EN 14758-1:2006+A1:20091DGRPHãþD



SIST EN 14758-1:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14758-1
March 2012 ICS 23.040.01 Supersedes EN 14758-1:2005+A1:2009English Version
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) -Part 1: Specifications for pipes, fittings and the system
Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Polypropylène avec modificateurs minéraux (PP-MD) - Partie 1: Spécifications pour les tubes, les raccords et le système
Kunststoff-Rohrleitungssysteme für erdverlegte drucklose Abwasserkanäle und -leitungen - Polypropylen mit mineralischen Additiven (PP-MD) - Teil 1: Anforderungen an Rohre, Formstücke und das Rohrleitungssystem This European Standard was approved by CEN on 22 January 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14758-1:2012: ESIST EN 14758-1:2012



EN 14758-1:2012 (E) 2 Contents Page Foreword . 4 1 Scope . 5 2 Normative references . 5 3 Terms, definitions, symbols and abbreviations . 6 3.1 Terms and definitions . 6 3.2 Symbols . 9 3.3 Abbreviations . 9 4 Material . 10 4.1 PP-MD material . 10 4.2 Reprocessable and recyclable material . 10 4.3 Melt mass-flow rate .
...

SLOVENSKI STANDARD
kSIST FprEN 14758-1:2011
01-oktober-2011
Cevni sistemi iz polimernih materialov za odvodnjavanje in kanalizacijo, ki delujejo
po težnostnem principu - Polipropilen z mineralnimi modifikatorji (PP-MD) - 1. del:
Specifikacije za cevi, fitinge in cevni sistem
Plastics piping systems for non-pressure underground drainage and sewerage -
Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings
and the system
Kunststoff-Rohrleitungssysteme für erdverlegte Abwasserkanäle und -leitungen -
Polypropylen mit mineralischen Additiven (PP-MD) - Teil 1: Anforderungen an Rohre,
Formstücke und das Rohrleitungssystem
Systèmes de canalisations en plastique pour les branchements et les collecteurs
d'assainissement enterrés sans pression - Polypropylène avec modificateurs minéraux
(PP-MD) - Partie 1: Spécifications pour les tubes, les raccords et le système
Ta slovenski standard je istoveten z: FprEN 14758-1
ICS:
23.040.01 Deli cevovodov in cevovodi Pipeline components and
na splošno pipelines in general
93.030 Zunanji sistemi za odpadno External sewage systems
vodo
kSIST FprEN 14758-1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST FprEN 14758-1:2011

---------------------- Page: 2 ----------------------
kSIST FprEN 14758-1:2011


EUROPEAN STANDARD
FINAL DRAFT
FprEN 14758-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

July 2011
ICS 93.030 Will supersede EN 14758-1:2005+A1:2009
English Version
Plastics piping systems for non-pressure underground drainage
and sewerage - Polypropylene with mineral modifiers (PP-MD) -
Part 1: Specifications for pipes, fittings and the system
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für erdverlegte
branchements et les collecteurs d'assainissement enterrés Abwasserkanäle und -leitungen - Polypropylen mit
sans pression - Polypropylène avec modificateurs minéraux mineralischen Additiven (PP-MD) - Teil 1: Anforderungen
(PP-MD) - Partie 1: Spécifications pour les tubes, les an Rohre, Formstücke und das Rohrleitungssystem
raccords et le système
This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical
Committee CEN/TC 155.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprEN 14758-1:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
kSIST FprEN 14758-1:2011
FprEN 14758-1:2011 (E)
Contents Page
Foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms, definitions, symbols and abbreviations . 6
3.1 Terms and definitions . 6
3.2 Symbols . 9
3.3 Ab
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.