EN 3745-410:2015

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life

This European Standard specifies a method of measuring the thermal endurance of a finished optical cable. There are two test methods incorporated which estimate the cables thermal life with or without the cable.
-   Method A - without mechanical stress (temperature only),
-   Method B - combined temperature and mechanical stress.

Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrezuge - Prüfverfahren - Teil 410: Lebensdauer unter Temperatureinwirkung

Série aérospatiale - Fibre et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 410 : Durée de vie en température

Aeronavtika - Optična vlakna in kabli za uporabo v zračnih plovilih - Preskusne metode - 410. del: Življenjska doba pod temperaturnim vplivom

Ta evropski standard določa metodo za merjenje toplotne vzdržljivosti končanega optičnega kabla. Dve preskusni metodi sta uporabljeni za oceno življenjske dobe toplotne vzdržljivosti kabla s kablom ali brez njega.
– Metoda A: brez mehanskih obremenitev (samo temperatura).
– Metoda B: združene toplotne in mehanske obremenitve.

General Information

• Status: Published
• Publication Date: 21-Jul-2015
• Withdrawal Date: 30-Jan-2016
• ICS: 49.090 - On-board equipment and instruments
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 22-Jul-2015
• Completion Date: 22-Jul-2015
• Ref Project: SIST EN 3745-410:2015 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life

Relations

• Replaces: EN 3745-410:2007 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life
• Effective Date: 29-Jul-2015

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrezuge - Prüfverfahren - Teil 410: Lebensdauer unter TemperatureinwirkungSérie aérospatiale - Fibre et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 410 : Durée de vie en températureAerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life49.060Aerospace electric equipment and systems33.180.10Fibres and cablesICS:Ta slovenski standard je istoveten z:EN 3745-410:2015SIST EN 3745-410:2015en,fr,de01-oktober-2015SIST EN 3745-410:2015SLOVENSKI
STANDARDSIST EN 3745-410:20071DGRPHãþD



SIST EN 3745-410:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3745-410
July 2015 ICS 49.090 Supersedes EN 3745-410:2007English Version
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life
Série aérospatiale - Fibre et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 410 : Durée de vie en température
Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrezuge - Prüfverfahren - Teil 410: Lebensdauer unter Temperatureinwirkung This European Standard was approved by CEN on 14 February 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3745-410:2015 ESIST EN 3745-410:2015



EN 3745-410:2015 (E) 2 Contents
Page Foreword .3 1 Scope .4 2 Normative references .4 3 Test specimens .4 3.1 Fibre ends .4 4 Method A (without mechanical stress applied) .4 4.1 Preparation of test specimens .4 4.2 Test conditions .5 4.3 Apparatus .5 4.4 Procedure .5 4.4.1 Initial measurements .5 4.4.2 Test .5 4.4.3 Final measurements and requirement .6 4.4.4 Special precautions .6 5 Method B (with mechanical stress applied) .
...