EN ISO 1833-12:2010

Textiles - Quantitative chemical analysis - Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide) (ISO 1833-12:2006)

ISO 1833-12:2006 specifies a method, using dimethylformamide, to determine the percentage of acrylic, modacrylic, chlorofibre or elastane, after removal of non-fibrous matter, in textiles made of binary mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and animal fibres, cotton (scoured, kiered or bleached), viscose, cupro, modal, polyamide, polyester or glass fibres.
It is applicable to animal hair, wool and silk dyed with pre-metallized dyes, but not to those dyed with after-chrome dyes.

Textilen - Quantitative chemische Analysen - Teil 12: Mischungen aus Polyacrylfasern, bestimmten Modacryl- oder Chlorfasern, bestimmten Elasthanen und bestimmten anderen Fasern (Dimethylformamid-Verfahren) (ISO 1833-12:2006)

Dieser Teil von ISO 1833 legt ein Dimethylformamid Verfahren zur Bestimmung des prozentualen Anteils an Polyacryl, Modacryl, Chlorfasern oder Elastan, nach dem Abtrennen der nichtfaserigen Begleitstoffe, in Textilien aus binären Fasermischungen aus
-   Polyacrylfasern, bestimmten Modacrylfasern, bestimmten Chlorfasern, bestimmten Elastanfasern
und
-   tierischen Fasern, Baumwolle (entschlichtet, gebeucht oder gebleicht), Viskose, Cupro, Modal, Polyamid, Polyester oder Glasfasern
fest.
Das Verfahren gilt für Tierhaare, Wolle und Seide, die mit vormetallisierten Farbstoffen gefärbt wurden; das Verfahren gilt nicht für mit Nachchromierfarbstoffen gefärbten Fasern.

Textiles - Analyse chimique quantitative - Partie 12: Mélanges d'acrylique, certains modacryliques, certaines chlorofibres, certains élasthannes et de certaines autres fibres (méthode au diméthylformamide) (ISO 1833-12:2006)

L'ISO 1833-12:2006 spécifie une méthode de détermination, au diméthylformamide, du pourcentage de fibres acryliques, modacryliques, de chlorofibres ou d'élasthannes, après élimination des matières non fibreuses, dans les textiles composés de mélanges binaires d'acrylique, certains modacryliques, certaines chlorofibres, certains élasthannes et de fibres animales, coton (lavé, débouilli ou blanchi), viscose, cupro, modal, polyamide, polyester ou fibres de verre.
Elle s'applique aux poils d'animaux, à la laine et la soie teints avec des colorants prémétallisés, mais non à ceux teints avec des colorants au chrome.

Tekstilije - Kvantitativna kemična analiza - 12. del: Mešanica akrilnih, nekaterih modakrilnih, nekaterih klorovlaken, nekaterih elastanovih in nekaterih drugih vlaken (metoda z uporabo dimetilformamida) (ISO 1833-12:2006)

Ta del standarda ISO 1833 določa metodo z uporabo dimetilformamida za ugotavljanje odstotne vrednosti akrilnih, modakrilnih vlaken, klorovlaken ali elastana po odstranitvi nevlakenske snovi v tekstilijah iz dvokomponentnih mešanic - akrilnih, določenih modakrilnih vlaken, določenih klorovlaken, določenih elastanov in - živalskih vlaken, bombaža (izkuhanega, razškrobljenega ali beljenega), viskoze, kupro vlaken, modalnih vlaken, poliamidnih, poliestrskih ali steklenih vlaken. Velja za živalska vlakna, volno in svilo, barvana s predmetaliziranimi barvami, ne pa za tista, ki so barvana s pokromiranimi barvami.

General Information

• Status: Withdrawn
• Publication Date: 12-Oct-2010
• Withdrawal Date: 16-Jul-2019
• ICS: 59.060.01 - Textile fibres in general
• ICS: 59.060.20 - Man-made fibres
• Technical Committee: CEN/TC 248 - Textiles and textile products
• Drafting Committee: CEN/TC 248 - Textiles and textile products
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 17-Jul-2019
• Ref Project: SIST EN ISO 1833-12:2013 - Textiles - Quantitative chemical analysis - Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide) (ISO 1833-12:2006)

Relations

• Replaced By: EN ISO 1833-12:2019 - Textiles - Quantitative chemical analysis - Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres with certain other fibres (method using dimethylformamide) (ISO 1833-12:2019)
• Effective Date: 24-Jul-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2013
7HNVWLOLMH.YDQWLWDWLYQDNHPLþQDDQDOL]DGHO0HãDQLFDDNULOQLKQHNDWHULK
PRGDNULOQLKQHNDWHULKNORURYODNHQQHNDWHULKHODVWDQRYLKLQQHNDWHULKGUXJLK
YODNHQPHWRGD]XSRUDERGLPHWLOIRUPDPLGD,62
Textiles - Quantitative chemical analysis - Part 12: Mixtures of acrylic, certain
modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method
using dimethylformamide) (ISO 1833-12:2006)
Textilen - Quantitative chemische Analysen - Teil 12: Mischungen aus Acrylfasern,
bestimmten Modacryl- oder Chlorfasern, bestimmten Elasthanen und bestimmten
anderen Fasern (Dimethylformamid-Verfahren) (ISO 1833-12:2006)
Textiles - Analyse chimique quantitative - Partie 12: Mélanges d'acrylique, certains
modacryliques, certaines chlorofibres, certains élasthannes et de certaines autres fibres
(méthode au diméthylformamide) (ISO 1833-12:2006)
Ta slovenski standard je istoveten z: EN ISO 1833-12:2010
ICS:
59.060.20 Umetna vlakna Man-made fibres
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 1833-12
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2010
ICS 59.060.20
English Version
Textiles - Quantitative chemical analysis - Part 12: Mixtures of
acrylic, certain modacrylics, certain chlorofibres, certain
elastanes and certain other fibres (method using
dimethylformamide) (ISO 1833-12:2006)
Textiles - Analyse chimique quantitative - Partie 12: Textilen - Quantitative chemische Analysen - Teil 12:
Mélanges d'acrylique, certains modacryliques, certaines
Mischungen aus Polyacrylfasern, bestimmten Modacryl-
chlorofibres, certains élasthannes et de certaines autres oder Chlorfasern, bestimmten Elasthanen und bestimmten
fibres (méthode au diméthylformamide) (ISO 1833- anderen Fasern (Dimethylformamid-Verfahren) (ISO 1833-
12:2006) 12:2006)
This European Standard was approved by CEN on 12 September 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1833-12:2010: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
The text of ISO 1833-12:2006 has been prepared by Technical Committee ISO/TC 38 “Textiles” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 1833-12:2010 by
Technical Committee CEN/TC 248 “Textiles and textile products”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the
latest by April 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 1833-12:2006 has been approved by CEN as EN ISO 1833-12:2010 without any modification.

INTERNATIONAL ISO
STANDARD 1833-12
First edition
2006-06-01
Textiles — Quantitative chemical
analysis —
Part 12:
Mixtures of acrylic, certain modacrylics,
certain chlorofibres, certain elastanes
and certain other fibres (method using
dimethylformamide)
Textiles — Analyse chimique quantitative —
Partie 12: Mélanges d'acrylique, certains modacryliques, certaines
chlorofibres, certains élasthannes et de certaines autres fibres
(méthode au diméthylformamide)

Reference number
ISO 1833-12:2006(E)
©
ISO 2006
ISO 1833-12:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved

ISO 1833-12:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Par
...