EN 12274-5:2018

Slurry surfacing - Test method - Part 5: Determination of the minimum binder content and wearing resistance

This European Standard specifies a test method for the design of slurry surfacing mixture based on the determination of the minimum binder content of the mixture and the resistance to wear under wet track abrasion conditions for the purpose to support the mixture design.
This test can be used for quality control purposes.

Dünne Asphaltdeckschichten in Kaltbauweise — Prüfverfahren — Teil 5: Bestimmung des Mindestbindemittelgehaltes und der Verschleißfestigkeit von Bitumenschlämmen

Diese Europäische Norm legt ein Prüfverfahren für die Mischgutzusammensetzung für Dünne Asphaltdeckschichten in Kaltbauweise basierend auf der Bestimmung des Mindestgehalts an Bindemittel im Mischgut und der Verschleißfestigkeit unter nassen Spurabriebbedingungen fest, um die Festlegung der Mischgutzusammensetzung (Mischgutentwurf) zu unterstützen.
Diese Prüfung kann zu Qualitätslenkungszwecken genutzt werden.

Matériaux bitumineux coulés à froid - Méthode d'essai - Partie 5: Détermination de la teneur minimum en liant et de la résistance à l'usure

La présente Norme européenne spécifie une méthode d'essai pour la conception des matériaux bitumineux coulés à froid, y compris un mélange de micro-coulage à froid, sur la base de la détermination de la teneur minimale en liant du mélange et de la résistance à l'usure en conditions d'abrasion sur chaussée mouillée dans le but de soutenir la conception du mélange.
Cet essai peut être utilisé à des fins de contrôle de la qualité.

Tankoplastne prevleke po hladnem postopku - Preskusne metode - 5. del: Ugotavljanje minimalnega deleža veziva in odpornosti proti obrabi

Ta evropski standard določa preskusno metodo za oblikovanje površin iz redke malte, vključno z zmesmi za mikro prevleke, ki temelji na ugotavljanju minimalne vsebnosti veziva v zmesi in odpornosti na obrabo mokre steze z namenom podpiranja oblikovanja zmesi.
Ta preskus se lahko uporablja za preverjanje kakovosti.

General Information

• Status: Published
• Publication Date: 13-Mar-2018
• Withdrawal Date: 29-Sep-2018
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 2 - Surface dressing and slurry surfacing
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 02-Sep-2023
• Completion Date: 02-Sep-2023
• Ref Project: SIST EN 12274-5:2018 - Slurry surfacing - Test method - Part 5: Determination of the minimum binder content and wearing resistance

Relations

• Replaces: EN 12274-5:2003 - Slurry surfacing - Test method - Part 5: Determination of wearing
• Effective Date: 04-Jun-2014

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12274-5:2018
01-maj-2018
1DGRPHãþD
SIST EN 12274-5:2004
Tankoplastne prevleke po hladnem postopku - Preskusne metode - 5. del:
Ugotavljanje minimalnega deleža veziva in odpornosti proti obrabi
Slurry surfacing - Test method - Part 5: Determination of the minimum binder content and
wearing resistance
Dünne Asphaltschicht in Kaltbauweise - Prüfverfahren - Teil 5: Bestimmung des
Verschleißes
Ta slovenski standard je istoveten z: EN 12274-5:2018
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
SIST EN 12274-5:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12274-5:2018

---------------------- Page: 2 ----------------------

SIST EN 12274-5:2018


EN 12274-5
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2018
EUROPÄISCHE NORM
ICS 93.080.20 Supersedes EN 12274-5:2003
English Version

Slurry surfacing - Test method - Part 5: Determination of
the minimum binder content and wearing resistance
Matériaux bitumineux coulés à froid - Méthode d'essai Dünne Asphaltdeckschichten in Kaltbauweise -
- Partie 5: Détermination de la teneur minimum en Prüfverfahren - Teil 5: Bestimmung des
liant et de la résistance à l'usure Mindestbindemittelgehaltes und des Verschleißes von
Bitumenschlämmen
This European Standard was approved by CEN on 13 November 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12274-5:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 12274-5:2018
EN 12274-5:2018 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Materials . 5
5.1 Coarse aggregates and fine aggregates . 5
5.2 Reactive filler . 5
5.3 Emulsion . 5
6 Apparatus . 5
6.1 Apparatus used for preparation of samples . 5
6.2 Apparatus used for testing. 6
7 Preparation of sa
...