EN ISO 16396-2:2017

Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)

ISO 16396-2:2017 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polyamide moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given.
Procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made are given. Properties and test methods that are suitable and necessary to characterize polyamide moulding and extrusion materials are listed.
The properties have been selected from the general test methods in ISO 10350‑1. Other test methods in wide use for, or of particular significance to, these moulding and extrusion materials are also included in this document, as are the designatory properties viscosity number and tensile modulus of elasticity given in ISO 16396‑1.

Kunststoffe - Polyamid-(PA)-Formmassen für das Spritzgießen und die Extrusion - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 16396-2:2017)

Dieses Dokument enthält Leitlinien zur Anwendung der verfügbaren chemischen Prüfverfahren für Leder. Diese Information kann von allen verwendet werden, die am Erstellen von Spezifikationen für Leder und besonders für die Parameter von chemischen Stoffen, die Beschränkungen unterliegen, beteiligt sind.
Auflistungen von Beschränkungen unterliegenden Chemikalien enthalten viele Stoffe, die für die Leder-industrie keine Bedeutung haben. Die in diesem Dokument nicht genannten chemischen Stoffe brauchen nicht bestimmt werden, wodurch sich unnötige Analysekosten vermeiden lassen

Plastiques - Matériaux polyamides (PA) pour moulage et extrusion - Partie 2: Préparation des éprouvettes et détermination des propriétés (ISO 16396-2:2017)

ISO 16396-2:2017 spécifie les méthodes de préparation des éprouvettes et les méthodes d'essai à utiliser pour déterminer les propriétés des matériaux polyamides pour moulage et extrusion. Elle indique les exigences requises lors de la manipulation du matériau d'essai, ainsi que lors de conditionnement dudit matériau avant moulage et des éprouvettes avant l'essai.
Elle précise les modes opératoires et les conditions nécessaires à la préparation des éprouvettes, ainsi que les modes opératoires de mesurage des propriétés des matériaux à partir desquels ces éprouvettes sont fabriquées. Elle fournit également une liste des propriétés et des méthodes d'essai appropriées et nécessaires à la caractérisation des matériaux polyamides pour moulage et extrusion.
Les propriétés ont été choisies parmi les méthodes d'essai générales données dans l'ISO 10350‑1. Le présent document comprend en outre d'autres méthodes d'essai, présentant une importance particulière ou étant largement utilisées dans le cas de ces matériaux pour moulage et extrusion, de même que les propriétés de désignation: indice de fluidité et module d'élasticité données dans l'ISO 16396‑1.

Polimerni materiali - Poliamidni materiali (PA) za oblikovanje in ekstrudiranje - 2. del: Priprava preskušancev in ugotavljanje lastnosti (ISO 16396-2:2017)

Ta dokument določa metode za pripravo preskušancev in preskusnih metod za uporabo pri ugotavljanju lastnosti poliamidnih materialov za oblikovanje in ekstrudiranje. Podane so zahteve za ravnanje s preskusnim materialom ter za obdelavo preskusnega materiala pred oblikovanjem in obdelavo preskušancev pred preskusom.
Podani so postopki in pogoji za pripravo preskušancev ter postopki za merjenje
lastnosti materialov, iz katerih so izdelani preskušanci. Navedene so lastnosti in preskusne metode,
ki so primerne in nujne za opredelitev poliamidnih materialov za oblikovanje in ekstrudiranje.
Lastnosti so bile izbrane na podlagi splošnih preskusnih metod iz standarda ISO 10350-1. Druge preskusne metode, ki se splošno uporabljajo ali so posebej pomembne za te materiale za oblikovanje in ekstrudiranje, so prav tako vključene v tem dokumentu. Vključene so tudi označevalne lastnosti, ki so navedene v standardu ISO 16396-1 (viskoznostno število in natezni modul elastičnosti).

General Information

• Status: Withdrawn
• Publication Date: 21-Mar-2017
• Withdrawal Date: 12-Jul-2022
• ICS: 83.080.20 - Thermoplastic materials
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 13-Jul-2022
• Ref Project: SIST EN ISO 16396-2:2017 - Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)

Relations

• Replaces: EN ISO 1874-2:2012 - Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012)
• Effective Date: 08-Jun-2022
• Replaced By: EN ISO 16396-2:2022 - Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2022)
• Effective Date: 20-Jul-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 16396-2:2017
01-maj-2017
1DGRPHãþD
SIST EN ISO 1874-2:2014
Polimerni materiali - Poliamidni materiali (PA) za oblikovanje in ekstrudiranje - 2.
del: Priprava preskušancev in ugotavljanje lastnosti (ISO 16396-2:2017)
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test
specimens and determination of properties (ISO 16396-2:2017)
Kunststoffe - Polyamid-(PA)-Formmassen für das Spritzgießen und die Extrusion - Teil 2:
Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 16396-2:2017)
Plastiques - Matériaux polyamides (PA) pour moulage et extrusion - Partie 2 :
Préparation des éprouvettes et détermination des propriétés (ISO 16396-2:2017)
Ta slovenski standard je istoveten z: EN ISO 16396-2:2017
ICS:
83.080.20 Plastomeri Thermoplastic materials
SIST EN ISO 16396-2:2017 de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 16396-2:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 16396-2:2017


EN ISO 16396-2
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2017
EUROPÄISCHE NORM
ICS 83.080.20 Supersedes EN ISO 1874-2:2012
English Version

Plastics - Polyamide (PA) moulding and extrusion
materials - Part 2: Preparation of test specimens and
determination of properties (ISO 16396-2:2017)
Plastiques - Matériaux polyamides (PA) pour moulage Kunststoffe - Polyamid-(PA)-Formmassen für das
et extrusion - Partie 2: Préparation des éprouvettes et Spritzgießen und die Extrusion - Teil 2: Herstellung
détermination des propriétés (ISO 16396-2:2017) von Probekörpern und Bestimmung von Eigenschaften
(ISO 16396-2:2017)
This European Standard was approved by CEN on 3 February 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16396-2:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 16396-2:2017
EN ISO 16396-2:2017 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 16396-2:2017
EN ISO 16396-2:2017 (E)
European foreword
This document (EN ISO 16396-2:2017) has been prepared by Technical Committee ISO/TC 61 “Plastics”
in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by
NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2017 and conflicting national standards
shall be withdrawn at the latest by September 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 1874-2:2012.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 16396-2:2
...