Smoke and heat control systems - Part 1: Specification for smoke barriers

1.1      General
This document specifies product characteristics, and test/assessment methods and compliance criteria of the test results for smoke barriers which comprise the barrier itself, with or without associated activation and drive devices. Smoke barriers are intended to be installed in smoke control systems in construction works.
There are two type of smoke barriers (see Annex G).
1.2      Exclusions
This document does not apply to;
-   barriers made of part of the building’s structure;
-   theatre textile curtains;
-   operable fabric curtains according to EN 16034.

Rauch- und Wärmefreihaltung - Teil 1: Bestimmungen für Rauchschürzen

1.1   Allgemeines
Dieses Dokument spezifiziert Produktmerkmale und Prüfungs-/Bewertungsverfahren und Erfüllungskriterien der Prüfergebnisse für Rauchschürzen, die die Rauchschürze selbst mit oder ohne zugehörige Betätigungs- und Antriebseinrichtungen beinhalten. Rauchschürzen sind für den Einbau in Rauchschutzanlagen in Bauwerken vorgesehen.
Es gibt zwei Typen von Rauchschürzen (siehe Anhang G).
1.2   Ausschlüsse
Dieses Dokument gilt nicht für:
-   Rauchschürzen die aus Teilen des Gebäudes bestehen;
-   textile Vorhänge in Theatern;
-   bedienbare Feuerschutzvorhänge nach EN 16034.

Systèmes pour le contrôle des fumées et de la chaleur - Partie 1 : Spécifications relatives aux écrans de cantonnement de fumée

1.1 Généralités
Le présent document spécifie les caractéristiques du produit, et les méthodes d’essai/évaluation et les critères de conformité des résultats d’essai pour les écrans de cantonnement de fumée qui sont constitués de l’écran lui-même, avec ou sans les dispositifs associés de déclenchement de commande. Les écrans de cantonnement de la fumée sont prévus pour être installés dans les systèmes de contrôle des fumées dans les constructions.
Il existe deux types d’écrans de cantonnement de fumée (voir l’Annexe G).
1.2 Exclusions
Le présent document ne s’applique pas aux :
- écrans constitués d’une partie de la structure du bâtiment ;
- rideaux textiles de théâtre ;
- rideaux en tissu manœuvrables conformément à l’EN 16034.

Sistemi za nadzor dima in toplote - 1. del: Določila za ovire proti širjenju dima

General Information

Status
Not Published
Publication Date
10-Jan-2021
Withdrawal Date
11-Jul-2021
Current Stage
5098 - Decision to abandon - Formal Approval
Completion Date
14-Dec-2022

Relations

Buy Standard

Draft
prEN 12101-1:2018
English language
66 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
oSIST prEN 12101-1:2018
01-december-2018
6LVWHPL]DQDG]RUGLPDLQWRSORWHGHO'RORþLOD]DRYLUHSURWLãLUMHQMXGLPD
Smoke and heat control systems - Part 1: Specification for smoke barriers
Rauch- und Wärmefreihaltung - Teil 1: Bestimmungen für Rauchschürzen
Systèmes pour le contrôle des fumées et de la chaleur - Partie 1: Spécifications relatives
aux écrans de cantonnement de fumée
Ta slovenski standard je istoveten z: prEN 12101-1
ICS:
13.220.20 3RåDUQD]DãþLWD Fire protection
oSIST prEN 12101-1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 12101-1:2018
oSIST prEN 12101-1:2018
DRAFT
EUROPEAN STANDARD
prEN 12101-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2018
ICS 13.220.99 Will supersede EN 12101-1:2005
English Version
Smoke and heat control systems - Part 1: Specification for
smoke barriers
Systèmes pour le contrôle des fumées et de la chaleur - Rauch- und Wärmefreihaltung - Teil 1: Bestimmungen
Partie 1: Spécifications relatives aux écrans de für Rauchschürzen
cantonnement de fumée
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 191.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12101-1:2018 E
worldwide for CEN national Members.

oSIST prEN 12101-1:2018
prEN 12101-1:2018 (E)
Contents Page
European foreword . 6
Introduction . 7
1 Scope . 8
2 Normative references . 8
3 Terms, definitions and symbols . 9
3.1 General terms and definitions . 9
3.2 Symbols . 11
4 Product Characteristics . 12
4.1 Fire resistance . 12
4.1.1 General . 12
4.1.2 Stability duration under constant temperature (D) . 12
4.1.3 Stability duration under the standard time-temperature curve (DH) . 12
4.2 Reaction to fire . 12
4.3 Smoke leakage . 13
4.3.1 Curtain materials . 13
4.3.2 Openings, gaps and/or perimeter spaces . 13
4.4 Response delay (response time) . 13
4.4.1 General . 13
4.4.2 Closing mechanisms . 13
4.5 Deployment (response time) . 13
4.5.1 General . 13
4.5.2 Reliability . 13
4.5.3 Gravity fail-safe . 13
4.6 Operational reliability . 13
4.6.1 Cycle tests . 13
4.7 Durability . 14
4.8 Ability to release (Motors) . 14
4.9 Bump strips (if provided). 14
4.10 Toxicity (if provided) . 14
4.11 Volatile Organic Compounds (VOC) (if provided) . 14
5 Testing, assessment and sampling methods . 14
5.1 Fire resistance . 14
5.1.1 Stability duration under constant temperature (D) . 14
5.1.2 Stability duration under the standard time-temperature curve (DH) . 15
5.2 Reaction to fire . 15
5.3 Smoke leakage(s) . 15
5.3.1 Curtain materials . 15
5.3.2 Openings, gaps and/or perimeter spaces . 15
5.4 Nominal activation condition sensitivity. 15
5.4.1 Initiation device (Active smoke barriers) immediate response . 15
5.4.2 Closing mechanisms . 15
5.5 Response delay (response time) . 15
5.5.1 General . 15
5.5.2 Gravity fail-safe . 15
5.6 Operational reliability . 15
oSIST prEN 12101-1:2018
prEN 12101-1:2018 (E)
5.6.1 Cycle tests . 15
5.7 Durability. 15
5.8 Ability to release (Motors) . 16
5.9 Bump strips . 16
5.10 Toxicity . 16
5.11 Volatile Organic Compounds (VOC) . 16
6 Assessment and verification of constancy of performance - AVCP . 16
6.1 General . 16
6.2 Type testing . 16
6.2.1 General . 16
6.2.2 Test samples, testing and compliance criteria . 17
6.2.3 Test reports . 18
6.2.4 Shared other party results . 18
6.3 Factory production control (FPC) . 20
6.3.1 General . 20
6.3.2 Requirements . 20
6.3.3 Product specific requirements . 22
6.3.4 Initial inspection of factory and of FPC . 23
6.3.5 Continuous surveillance of FPC . 23
6.3.6 Procedure for modifications . 24
6.3.7 One-off products, pre-production products (e.g. prototypes) and products produced
in very low quantity . 24
7 Labelling and packaging . 25
Annex A (normative) General testing requirements . 26
A.1 General . 26
A.2 Response delay . 26
Annex B (normative) Reliability and response time tests . 27
B.1 Objective of Test . 27
B.2 Test specimen . 27
B.3 Test Procedure .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.