Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)

This document specifies a method of testing the resistance of the upper assembly of inspection chambers and manhole components against surface and traffic loading.
It is not applicable to requirements for testing the cover and frame. Those requirements are specified in EN 124-1 or other standards, depending on the material.
NOTE    Upper assembly components normally include shafts or risers, cones, telescopic adapters and near surface components.

Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Schachtringe und Steigrohre für Kontroll- und Einsteigschächte aus Thermoplasten - Bestimmung der Widerstandsfähigkeit gegen Belastungen der Oberfläche und Verkehrslasten (ISO 13266:2022)

Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la résistance aux charges de remblai et de circulation (ISO 13266:2022)

Le présent document spécifie une méthode permettant de soumettre à l’essai la résistance aux charges de remblai et de circulation du montage supérieur des composants de boîtes d’inspection et de branchement et de regards.
Il ne s’applique pas aux exigences d’essai relatives au tampon et au cadre. Celles-ci sont spécifiées dans l’EN 124-1 ou dans d’autres normes selon le type de matériau.
NOTE    Les composants du montage supérieur comprennent habituellement les éléments de rehausse, les cônes, les adaptateurs télescopiques et les composants proches de la surface.

Cevni sistemi iz polimernih materialov za odpadno vodo in kanalizacijo, ki delujejo po težnostnem principu in so položeni v zemljo - Plastomerni revizijski in vstopni jaški - Ugotavljanje odpornosti proti površinskim in prometnim obremenitvam (ISO 13266:2022)

General Information

Status
Published
Publication Date
10-Jan-2023
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
07-Oct-2024
Completion Date
11-Jan-2023

Relations

Buy Standard

Draft
prEN ISO 13266:2022
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 13266:2022
01-november-2022

Cevni sistemi iz polimernih materialov za odpadno vodo in kanalizacijo, ki delujejo

po težnostnem principu in so položeni v zemljo - Plastomerni revizijski in vstopni

jaški - Ugotavljanje odpornosti proti površinskim in prometnim obremenitvam (ISO
13266:2022)

Thermoplastics piping systems for non-pressure underground drainage and sewerage -

Thermoplastics shafts or risers for inspection chambers and manholes - Determination of

resistance against surface and traffic loading (ISO 13266:2022)
Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose
Abwasserkanäle und -leitungen - Schachtringe und Steigrohre für Kontroll- und
Einsteigschächte aus Thermoplasten - Bestimmung der Widerstandsfähigkeit gegen
Belastungen der Oberfläche und Verkehrslasten (ISO 13266:2022)
Systèmes de canalisations thermoplastiques pour branchements et collecteurs

d'assainissement enterrés sans pression - Éléments de réhausse thermoplastiques pour

boîtes d'inspection et de branchement ou regards - Détermination de la résistance aux

charges de remblai et de circulation (ISO 13266:2022)
Ta slovenski standard je istoveten z: prEN ISO 13266
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
91.140.80 Drenažni sistemi Drainage systems
93.030 Zunanji sistemi za odpadno External sewage systems
vodo
oSIST prEN ISO 13266:2022 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 13266:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO 13266:2022
INTERNATIONAL ISO
STANDARD 13266
Second edition
2022-06
Thermoplastics piping systems for
non-pressure underground drainage
and sewerage — Thermoplastics
shafts or risers for inspection
chambers and manholes —
Determination of resistance against
surface and traffic loading
Systèmes de canalisations thermoplastiques pour branchements
et collecteurs d'assainissement enterrés sans pression — Éléments
de réhausse thermoplastiques pour boîtes d'inspection et de
branchement ou regards — Détermination de la résistance aux
charges de remblai et de circulation
Reference number
ISO 13266:2022(E)
© ISO 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO 13266:2022
ISO 13266:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on

the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below

or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
© ISO 2022 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 13266:2022
ISO 13266:2022(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ..................................................................................................................................................................................... 1

3 Terms and definitions .................................................................................................................................................................................... 1

4 Principle ........................................................................................................................................................................................................................ 1

5 Apparatus .................................................................................................................................................................................................................... 2

6 Number of test pieces ......................................................................................................................................................................................4

7 Conditioning and test temperatures ..............................................................................................................................................4

8 Procedure ....................................................................................................................................................................................................................4

9 Test parameters .................................................................................................................................................................................................... 5

10 Test report .................................................................................................................................................................................................................. 5

iii
© ISO 2022 – All rights reserved
---------------------- Page: 5 ----------------------
oSIST prEN ISO 13266:2022
ISO 13266:2022(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www.iso.org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to

the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see

www.iso.org/iso/foreword.html.

This document was prepared by Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for

the transport of fluids, Subcommittee SC 1, Plastics pipes and fittings for soil, waste and drainage (including

land drainage).

This second edition cancels and replaces the first edition (ISO 13266:2010), which has been technically

revised.
The main changes are as follows:
— normative references have been updated;
— definitions have been removed;
— an additional classification (“Class C”) has been implemented in Table 1;
— technical changes have been made in 8.2 and Clause 10;
— this document has been editorially revised.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www.iso.org/members.html.
© ISO 2022 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 13266:2022
INTERNATIONAL STANDARD ISO 13266:2022(E)
Thermoplastics piping systems for non-pressure
underground drainage and sewerage — Thermoplastics
sha
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.