iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 10581:2013

(Main)

Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10581:2011)

Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10581:2011)

ISO 10581:2011 specifies the characteristics of homogeneous floor coverings, based on poly(vinyl chloride), supplied in either tile or roll form. Products may contain a transparent, non-PVC factory finish.
To encourage the consumer to make an informed choice, ISO 10581:2011 includes a classification system (see ISO 10874) based on intensity of use, which shows where these floor coverings should give satisfactory service. ISO 10581:2011 also specifies requirements for marking.

Elastische Bodenbeläge - Homogene Polyvinylchlorid-Bodenbeläge - Spezifikation (ISO 10581:2011)

Diese Internationale Norm legt die Eigenschaften von homogenen Bodenbelägen auf der Basis von Polyvinylchlorid (PVC) fest, die sowohl in Form von Platten als auch Rollen geliefert werden. Die Produkte können eine transparente, nicht aus PVC bestehende Oberflächenausführung enthalten.
Um den Verbraucher bei seiner Auswahl zu unterstützen, enthält diese Internationale Norm ein Klassifizierungssystem (siehe ISO 10874) auf Basis der Nutzungsintensität, das zeigt, wofür diese Bodenbeläge zufriedenstellend eingesetzt werden sollten. Die Norm legt auch die Anforderungen an die Kennzeichnung fest.

Revêtements de sol résilients - Revêtements de sol homogènes en poly(chlorure de vinyle) - Spécifications (ISO 10581:2011)

L'ISO 10581:2011 spécifie les caractéristiques des revêtements de sols homogènes à base de poly(chlorure de vinyle), fournis sous forme de dalles ou de rouleaux. Les produits peuvent présenter une finition d'usine transparente non PVC.
Pour aider le consommateur à faire son choix, l'ISO 10581:2011 inclut un système de classification (voir ISO 10874) basé sur l'intensité d'utilisation, indiquant l'endroit où il convient que le revêtement de sol rende un service satisfaisant. L'ISO 10581:2011 spécifie également les exigences de marquage.

Netekstilne talne obloge - Homogene polivinilkloridne talne obloge - Specifikacije (ISO 10581:2011)

Ta mednarodni standard določa značilnosti homogenih talnih oblog na osnovi polivinilklorida, ki so na voljo obliki plošč ali zvitkov. Talne obloge imajo lahko prosojen tovarniški zaključni sloj, ki ni iz PVC. Za spodbujanje potrošnikov k sprejemanju utemeljenih odločitev, ta mednarodni standard vsebuje sistem razvrščanja (glej ISO 10874) na podlagi intenzivnosti uporabe, ki kaže, kje bi se te talne obloge lahko zadovoljivo uporabljale. Vključuje tudi zahteve za označevanje.

General Information

Status
Withdrawn
Publication Date
22-Oct-2013
Withdrawal Date
04-Feb-2020
ICS
97.150 - Floor coverings
Technical Committee
CEN/TC 134 - Resilient and textile floor coverings
Drafting Committee
CEN/TC 134/WG 7 - Resilient floor coverings
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
05-Feb-2020
Ref Project
SIST EN ISO 10581:2013 - Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10581:2011)

Relations

Replaces
EN 649:2011 - Resilient floor coverings - Homogenous and heterogenous polyvinyl chloride floor coverings - Specification
Effective Date
30-Oct-2013
Replaced By
EN ISO 10581:2020 - Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10581:2019)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 10581:2013EN ISO 10581:2013
PreviousNext
Standard
EN ISO 10581:2013
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10581:2013
01-december-2013
1DGRPHãþD
SIST EN 649:2011
Netekstilne talne obloge - Homogene polivinilkloridne talne obloge - Specifikacije
(ISO 10581:2011)
Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering -
Specifications (ISO 10581:2011)
Elastische Bodenbeläge - Homogene Polyvinylchlorid-Bodenbeläge - Spezifikation (ISO
10581:2011)
Revêtements de sol résilients - Revêtements de sol homogènes en poly(chlorure de
vinyle) - Spécifications (ISO 10581:2011)
Ta slovenski standard je istoveten z: EN ISO 10581:2013
ICS:
97.150 Netekstilne talne obloge Non-textile floor coverings
SIST EN ISO 10581:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10581:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 10581:2013


EUROPEAN STANDARD
EN ISO 10581

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2013
ICS 97.150 Supersedes EN 649:2011
English Version
Resilient floor coverings - Homogeneous poly(vinyl chloride)
floor covering - Specifications (ISO 10581:2011)
Revêtements de sol résilients - Revêtements de sol Elastische Bodenbeläge - Homogene Polyvinylchlorid-
homogènes en poly(chlorure de vinyle) - Spécifications Bodenbeläge - Spezifikation (ISO 10581:2011)
(ISO 10581:2011)
This European Standard was approved by CEN on 12 October 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10581:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10581:2013
EN ISO 10581:2013 (E)
Contents
Page
Foreword .3


2

---------------------- Page: 4 ----------------------

SIST EN ISO 10581:2013
EN ISO 10581:2013 (E)
Foreword
The text of ISO 10581:2011 has been prepared by Technical Committee ISO/TC 219 “Floor coverings” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 10581:2013 by
Technical Committee CEN/TC 134 “Resilient, textile and laminate floor coverings” the secretariat of which is
held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2014, and conflicting national standards shall be withdrawn at the
latest by April 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 649:2011.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10581:2011 has been approved by CEN as EN ISO 10581:2013 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 10581:2013

---------------------- Page: 6 ----------------------

SIST EN ISO 10581:2013

INTERNATIONAL ISO
STANDARD 10581
Firs
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13329:2023(Main)
Laminate floor coverings - Specifications, requirements and test methods
SIST EN 13329:2024

This document specifies characteristics, requirements and test methods for laminate floor coverings with a surface layer as defined in 3.2 to 3.5. It also specifies requirements for marking and packaging.
It includes a classification system, based on EN ISO 10874, giving practical requirements for areas of use and levels of use, to indicate where laminate floor coverings will give satisfactory service and to encourage the consumer to make an informed choice.
Laminate floor coverings are generally designed for floating installations and are considered for domestic and commercial levels of use, including domestic kitchens. This document does not specify requirements relating to the use in areas which are subjected to frequent wetting, such as bathrooms, laundry rooms or saunas. In general, laminate floor coverings can only be used in those areas when authorized by the manufacturer and under conditions described in the manufacturer's installation guidelines.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17861:2023(Main)
Resilient, textile, laminate and modular mechanical locked floor coverings - Circular Economy - Terms and definitions
SIST EN 17861:2023

This document defines terms regarding circular economy that are used by the flooring sector.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12104:2023(Main)
Resilient floor coverings - Cork floor tiles - Specification
SIST EN 12104:2023

This document specifies the requirements for cork floor coverings made from agglomerated composition cork, with or without a decorative surface layer, with or without applied colours, supplied in tile form which are designed to be used with a factory finish and/or an in situ finish.
The cork floor decorative surface layer can be made of cork or other bio-based decorative materials, e.g. wood or bamboo veneers, linoleum, leather or natural fibres.
This document includes a classification system based on intensity of use which shows where cork floor tiles with a factory finish can give satisfactory service (see EN ISO 10874). It also specifies requirements for marking, labelling and packing.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16511:2023(Main)
Modular mechanical locked floor coverings (MMF) - Specification, requirements and test method for multilayer modular panels for floating installation
SIST EN 16511:2023

This document specifies the characteristics of multilayer mechanical locked floor covering with a wear-resistant and decorative surface layer supplied in panels (either tile or plank form). The floor panels are considered suitable for domestic and commercial levels of use and designed for floating installation.
This document does not apply to resilient floor panels for loose-laying according to EN ISO 20326, to multilayer wood floorings according to EN 13489, to wood veneer floor coverings according to EN 14354, to laminate floor covering according to EN 13329, EN 14978 and EN 15468 nor to products specified in EN ISO 10581, EN ISO 10582, EN ISO 24011, EN 12104 and ISO 14486.
This document is applicable to areas which are subject to frequent wetting, e.g. bathrooms, laundry rooms or saunas, only if specified by the producer.
This document also includes requirements for marking and packaging.
In Annex A (informative), optional properties are given. In Annex B (informative), a test method for the classification of the flexibility is given.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 26986:2012/A1:2022(Amendment)
Resilient floor coverings - Expanded (cushioned) poly(vinyl chloride) floor covering - Specification - Amendment 1 (ISO 26986:2010/Amd 1:2022)
SIST EN ISO 26986:2012/A1:2022

ISO 26986:2010 specifies the characteristics of floor coverings based on expanded (cushioned) poly(vinyl chloride), supplied as either tiles or rolls.
ISO 26986:2010 includes a classification system based on the intensity of use, which shows where resilient floor coverings give satisfactory service.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11638:2022(Main)
Resilient floor coverings - Heterogeneous poly(vinyl chloride) flooring on foam - Specification (ISO 11638:2020, including corrected version 2021-09)
SIST EN ISO 11638:2022

This document specifies the characteristics of heterogeneous poly(vinyl chloride) flooring on foam, based on poly(vinyl chloride), and supplied in roll form or tile and plank. Such products can contain a transparent, non PVC factory finish.
To encourage the consumer to make an informed choice, this document includes a classification system, based on intensity of use, which shows where these floor coverings can be expected to give satisfactory service.
It also specifies requirements for marking.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17849:2022(Main)
Resilient, textile, laminate and modular mechanical locked floor coverings - Guidance on how to implement EN 14041:2004/AC:2006 under the Construction Products Regulation EU 305/2011 (CPR)
SIST-TP CEN/TR 17849:2022

This document concerns floor covering products falling under the scope of EN 14041 as well as mandate M/119 and M/119 rev.1. Such products are considered construction products for indoor use.
Excluded are products which are loose laid (barrier)mats, runners and rugs, as well as products which might be covered by other harmonized standards, such as indoor sports flooring, or other legislation such as flooring in public transport.
The purpose of this document is to provide guidance on how to deal with the situation that:
a) the version EN 14041:2004/AC:2006 has to be used for placing CEN TC134 products onto the European market, even though it:
1) was developed under the no longer applicable “Council Directive 89/106/EEC on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (CPD)”;
and
2) has been withdrawn and replaced by EN 14041:2018 in the current CEN catalogue;
and
b) the more recent version EN 14041:2018 cannot be used for placing CEN TC134 products onto the European market, even though it:
1) was developed under the currently applicable legislation, “Regulation (EU) No 305/2011 laying down harmonised conditions for the marketing of construction products (CPR)”;
2) is the active version of the standard in the current CEN catalogue.
The focus will be on an overview of the resources available from the European commission for CE marking and placing products onto the European market as well as how to implement EN 14041:2004/AC:2006 under the current European legislation pointing out sections which are no longer valid.

  • Technical report
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23999:2021(Main)
Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat (ISO 23999:2021)
SIST EN ISO 23999:2022

This document specifies a method for determining dimensional stability and curling of resilient floor coverings, in the form of sheets, tiles or planks after exposure to heat.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17539:2021(Main)
Modular mechanical locked floor coverings (MMF) - Determination of geometrical characteristics
SIST EN 17539:2021

This document specifies test methods for the determination of geometrical characteristics of modular mechanical locked floor covering panels in respect of thickness, length, width, squareness, straightness, width flatness, length flatness, openings between assembled elements and height differences between assembled elements.
The geometrical characteristics of modular mechanical locked panels are important considerations because installed flooring will have an objectionable appearance if these performance criteria are not followed. This can cause the installed panels to line up unevenly, producing unsightly seams, uneven surfaces and corners that do not match.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16094:2021(Main)
Laminate floor coverings - Test method for the determination of micro-scratch resistance
SIST EN 16094:2021

This document specifies a test method for the micro-scratch resistance with two procedures (A and B) and a test method for polishing resistance (procedure C) which can be used for all types of laminate floor coverings. The resistance to polishing is related to mat surfaces.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day