iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

CEN ISO/TS 3250:2022

(Main)

Petroleum, petrochemical and natural gas industries - Calculation and reporting production efficiency in the operating phase (ISO/TS 3250:2021)

Petroleum, petrochemical and natural gas industries - Calculation and reporting production efficiency in the operating phase (ISO/TS 3250:2021)

This document provides requirements and guidance for reporting of production performance data and production loss data in the operating phase by use of production loss categorization. It supplements the principles of ISO 20815:2018, Clause E.3 and Annex G by providing additional details.
This document focusses on installations and asset elements within the upstream business category. Business categories and associated installations and plants/units, systems and equipment classes are used in line with ISO 14224:2016, Annex A.
The production loss categories given in Annex A are given at a high taxonomic level and supplements the reporting of failure and maintenance parameters as defined in ISO 14224:2016, Annex B.

Erdöl-, petrochemische und Erdgasindustrie - Berechnung und Meldung der Produktionseffizienz in der Betriebsphase (ISO/TS 3250:2021)

Industries du pétrole, de la pétrochimie et du gaz naturel - Calcul et rapport d’efficacité de la production dans la phase d’exploitation (ISO/TS 3250:2021)

Petrokemična industrija ter industrija za predelavo nafte in zemeljskega plina - Izračun in poročanje o učinkovitosti proizvodnje v fazi obratovanja (ISO/TS 3250:2021)

Ta dokument vsebuje zahteve in navodila za poročanje podatkov o učinkovitosti proizvodnje ter podatkov o proizvodnih izgubah v fazi obratovanja z uporabo kategorizacije proizvodnih izgub. Podaja dodatne podrobnosti, s katerimi dopolnjuje načela iz točke E.3 in dodatka G k standardu ISO 20815:2018.
Ta dokument se osredotoča na naprave in elemente sredstev v poslovni kategoriji raziskav ter proizvodnje. Poslovne kategorije in z njimi povezane naprave ter obrati/enote, sistemi in razredi opreme se uporabljajo v skladu s standardom ISO 14224:2016, dodatek A.
Kategorije proizvodnih izgub, podane v dodatku A, so navedene na visoki taksonomski ravni ter dopolnjujejo poročanje o parametrih okvar in vzdrževanja, kot je opredeljeno v dodatku B k standardu ISO 14224:2016.

General Information

Status
Published
Publication Date
28-Jun-2022
ICS
75.020 - Extraction and processing of petroleum and natural gas
Technical Committee
CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
Drafting Committee
CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
29-Jun-2022
Due Date
12-Sep-2023
Completion Date
29-Jun-2022
Ref Project
SIST-TS CEN ISO/TS 3250:2022 - Petroleum, petrochemical and natural gas industries - Calculation and reporting production efficiency in the operating phase (ISO/TS 3250:2021)

Buy Standard

TS CEN ISO/TS 3250:2022 - BARVETS CEN ISO/TS 3250:2022 - BARVE
PreviousNext
Technical specification
TS CEN ISO/TS 3250:2022 - BARVE
English language
80 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN ISO/TS 3250:2022
01-september-2022
Petrokemična industrija ter industrija za predelavo nafte in zemeljskega plina -
Izračun in poročanje o učinkovitosti proizvodnje v fazi obratovanja (ISO/TS
3250:2021)
Petroleum, petrochemical and natural gas industries - Calculation and reporting
production efficiency in the operating phase (ISO/TS 3250:2021)
Erdöl-, petrochemische und Erdgasindustrie - Berechnung und Meldung der
Produktionseffizienz in der Betriebsphase (ISO/TS 3250:2021)
Industries du pétrole, de la pétrochimie et du gaz naturel - Calcul et rapport d’efficacité
de la production dans la phase d’exploitation (ISO/TS 3250:2021)
Ta slovenski standard je istoveten z: CEN ISO/TS 3250:2022
ICS:
75.020 Pridobivanje in predelava Extraction and processing of
nafte in zemeljskega plina petroleum and natural gas
SIST-TS CEN ISO/TS 3250:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TS CEN ISO/TS 3250:2022

---------------------- Page: 2 ----------------------
SIST-TS CEN ISO/TS 3250:2022


CEN ISO/TS 3250
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

June 2022
TECHNISCHE SPEZIFIKATION
ICS 75.020
English Version

Petroleum, petrochemical and natural gas industries -
Calculation and reporting production efficiency in the
operating phase (ISO/TS 3250:2021)
Industries du pétrole, de la pétrochimie et du gaz Erdöl-, petrochemische und Erdgasindustrie -
naturel - Calcul et rapport d'efficacité de la production Berechnung und Meldung der Produktionseffizienz in
dans la phase d'exploitation (ISO/TS 3250:2021) der Betriebsphase (ISO/TS 3250:2021)
This Technical Specification (CEN/TS) was approved by CEN on 20 June 2022 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 3250:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST-TS CEN ISO/TS 3250:2022
CEN ISO/TS 3250:2022 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST-TS CEN ISO/TS 3250:2022
CEN ISO/TS 3250:2022 (E)
European foreword
The text of ISO/TS 3250:2021 has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries” of the
International Organization for Standardization (ISO) and has been taken over as CEN ISO/TS 3250:2022
by Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries” the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Tur
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 35102:2021(Main)
Petroleum and natural gas industries - Arctic operations - Escape, evacuation and rescue from offshore installations (ISO 35102:2020)
SIST EN ISO 35102:2022

This document establishes the principles, specifies the requirements and provides guidance for the development and implementation of an escape, evacuation and rescue (EER) plan. It is applicable to offshore installation design, construction, transportation, installation, offshore production/exploration drilling operation service life inspection/repair, decommissioning and removal activities related to petroleum and natural gas industries in the arctic and cold regions.
Reference to arctic and cold regions in this document is deemed to include both the Arctic and other locations characterized by low ambient temperatures and the presence or possibility of sea ice, icebergs, icing conditions, persistent snow cover and/or permafrost.
This document contains requirements for the design, operation, maintenance, and service-life inspection or repair of new installations and structures, and to modification of existing installations for operation in the offshore Arctic and cold regions, where ice can be present for at least a portion of the year. This includes offshore exploration, production and accommodation units utilized for such activities. To a limited extent, this document also addresses the vessels that support ER, if part of the overall EER plan.
While this document does not apply specifically to mobile offshore drilling units (MODUs, see ISO 19905‑1) many of the EER provisions contained herein are applicable to the assessment of such units in situations when the MODU is operated in arctic and cold regions.
The provisions of this document are intended to be used by stakeholders including designers, operators and duty holders. In some cases, floating platforms (as a type of offshore installations) can be classified as vessels (ships) by national law and the EER for these units are stipulated by international maritime law. However, many of the EER provisions contained in this document are applicable to such floating platforms.
This document applies to mechanical, process and electrical equipment or any specialized process equipment associated with offshore arctic and cold region operations that impacts the performance of the EER system. This includes periodic training and drills, EER system maintenance and precautionary down-manning as well as emergency situations.
EER associated with onshore arctic oil and gas facilities are not addressed in this document, except where relevant to an offshore development.

  • Standard
    116 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15663:2021(Main)
Petroleum, petrochemical and natural gas industries - Life cycle costing (ISO 15663:2021)
SIST EN ISO 15663:2021

This document specifies requirements for and gives guidance on the application of life cycle costing to create value for the development activities and operations associated with drilling, exploitation, processing and transport of petroleum, petrochemical and natural gas resources. This document covers facilities and associated activities within different business categories (upstream, midstream, downstream and petrochemical).
The life cycle costing process as described in this document is applicable when making decisions between competing options that are differentiated by cost and/or economic value. This document is not concerned with decision-making related to the economic performance of individual options or options differentiated by factors other than cost or economic value.
Guidance is provided on the management methodology and application of life cycle costing in support of decision-making across life cycle phases. The extent of planning and management depends on the magnitude of the costs involved, the potential value that can be created and the life cycle phase. It also provides the means of identifying cost drivers and provides a cost-control framework for these cost drivers, allowing effective cost control and optimization over the entire life of an asset.

  • Standard
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 35104:2020(Main)
Petroleum and natural gas industries - Arctic operations - Ice management (ISO 35104:2018)
SIST EN ISO 35104:2020

This document establishes the principles, specifies the requirements and provides guidance for ice management (IM) in arctic and cold regions, from the point of view of planning, engineering, implementation and documentation. Reference to arctic and cold regions in this document is deemed to include both the Arctic and other regions characterized by low ambient temperatures, sea ice, icebergs and icing conditions. These regions are often remote and lacking in marine and communications infrastructure.
Ice management to support the following in-ice activities and infrastructures are covered by this document:
—          floating moored and/or dynamically positioned drilling vessels, coring vessels, production facilities and work-over vessels;
—          construction and installation (includes trenching, dredging, pipe laying);
—          tanker loading and other offloading operations;
—          protecting subsea structures and equipment;
—          seismic operations;
—          oil spill response;
—          bottom founded structures (fixed platforms and movable structures, including jack-ups).
This document also applies to mobilization, demobilization and construction support services, because these can be affected by ice conditions.
In view of the wide range of possible offshore operations in arctic and cold regions, this document provides guidelines, but does not present typical ice management plans for field operations.
This document does not provide requirements, recommendations or guidance pertaining to the design of structures, systems and components used in ice management, beyond the principles given. This document does not provide specific formulations for ice loads, which are covered by ISO 19906.
This document is not applicable to coastal port operations and to commercial trading vessels conducting transit or convoy operations.

  • Standard
    104 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 29001:2020(Main)
Petroleum, petrochemical and natural gas industries - Sector-specific quality management systems - Requirements for product and service supply organizations (ISO 29001:2020)
SIST EN ISO 29001:2020

This document defines quality management system requirements for product and service supply organizations to the petroleum, petrochemical and natural gas industries.
This document is written as a supplement to ISO 9001:2015. The supplementary requirements and guidance to ISO 9001:2015 have been developed to manage supply chain risks and opportunities associated with the petroleum, petrochemical and natural gas industries and to provide a framework for aligning requirements with complementary standards employed within the industries.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TS 35105:2019(Main)
Petroleum and natural gas industries - Arctic operations - Material requirements for arctic operations (ISO/TS 35105:2018)
SIST-TS CEN ISO/TS 35105:2020

ISO/TS 35105:2018 provides recommendations for material selection, manufacturing and fabrication requirements, testing and qualification of steel structures and components for offshore and onshore petroleum and natural gas facilities operating in Arctic and cold environments.
ISO/TS 35105:2018 is intended to be used as a supplement to existing standards for steel structures where the particular operating conditions in Arctic regions are not sufficiently addressed.
ISO/TS 35105:2018 gives particular requirements to ensure safe operation with respect to the risk of brittle fracture at low temperatures. These requirements will affect the selection of material grade and design class as well as the technical delivery conditions for steel. They will also affect the fabrication requirements as well as testing and qualification requirements.
ISO/TS 35105:2018 also gives recommendations:
-      to mitigate the operational and integrity aspects related to snow and ice accretion on topside structures;
-      to take into account the particular Arctic operating conditions in corrosion assessments and requirements for corrosion protection systems;
-      for particular operational requirements to ensure safe operation in Arctic regions.
The requirements in this document are applicable to any operating temperatures, but particular requirements related to de-rating (loss of strength) at high temperatures are not addressed. Limitations to the applicable minimum design temperature caused by the capability of the materials' low temperature performance can exist, but are not a limitation for the scope of this document.
As a practical guideline for the use of this document, low temperature is defined as lowest anticipated service temperature (LAST) below ?10 °C.
NOTE       For determination of LAST, see 6.3.2.

  • Technical specification
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 35101:2019(Main)
Petroleum and natural gas industries - Arctic operations - Working environment (ISO 35101:2017)
SIST EN ISO 35101:2020

ISO 35101:2017 describes the working environment that can be expected when operating oil and gas facilities in Arctic environments/climate. ISO 35101:2017 provides principles and generic guidelines for the design and operation of fixed and floating oil and gas facilities both onshore and offshore.
The aim of ISO 35101:2017 is to ensure optimal health, safety, human performance and decision-making conditions for people working on oil and gas facilities in Arctic conditions.
ISO 35101:2017 applies to the design and operation of new facilities and structures, and to modification of existing facilities for operation in the Arctic environment. This also includes offshore and onshore exploration and accommodation units for such activities.
ISO 35101:2017 is divided into three main parts.
-      The first part (Clause 5) describes the general principles and guidelines for risk management.
-      The second part (Clause 6) describes the general working environment (working environment hazards found in many workplaces and provides some threshold limit values (TLVs) and design references that can be especially challenging in Arctic conditions.
-      The third part (Clause 7 to Clause 9) addresses the climatic conditions expected in the Arctic. Clause 8 describes working environment design and technical solutions, while Clause 9 describes working environment operational requirements for prevention and management of cold-related problems.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 35106:2019(Main)
Petroleum and natural gas industries - Arctic operations - Metocean, ice, and seabed data (ISO 35106:2017)
SIST EN ISO 35106:2019

ISO 35106:2017 specifies requirements and provides recommendations and guidance for the collection, analysis and presentation of relevant physical environmental data for activities of the petroleum and natural gas industries in arctic and cold regions. Activities include design and operations, which involve planning and actual execution.
Reference to arctic and cold regions in this document is deemed to include both the Arctic and other locations characterized by low ambient temperatures and the presence or possibility of sea ice, icebergs, shelf ice, glaciers, icing conditions, persistent snow cover, frozen surfaces of lakes and rivers, localized and rapidly changing weather systems and/or permafrost.
ISO 35106:2017 outlines requirements for a range of different operations that have been or are presently being undertaken and for existing design concepts. This document can also be used for other operations and new design concepts in arctic and cold regions as long as it is recognized that all data requirements are not necessarily addressed.

  • Standard
    128 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10426-3:2019(Main)
Petroleum and natural gas industries - Cements and materials for well cementing - Part 3: Testing of deepwater well cement formulations (ISO 10426-3:2019)
SIST EN ISO 10426-3:2019

This document provides procedures for testing well cements and cement blends for use in the petroleum and natural gas industries in a deepwater environment, or areas with a low seafloor temperature, or areas where low well temperatures exist.
This document supplements API RP 10B-3, 2nd edition (2016), the requirements of which are applicable with the exceptions specified in this document.
This document excludes the mitigation of shallow water flow in deepwater wells.
NOTE       This is addressed in API RP 65.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 35103:2019(Main)
Petroleum and natural gas industries - Arctic operations - Environmental monitoring (ISO 35103:2017)
SIST EN ISO 35103:2019

ISO 35103:2017 gives requirements, specifications and guidelines to ensure that environmental monitoring in the offshore Arctic region is fit for purpose. The Arctic region includes the territory lying to the North of the Arctic Circle (Latitude 66°33′45.8″). This document can be applied to sub-Arctic locations which experience Arctic-like conditions and contain relevant components of a cold-climate ecosystem.
ISO 35103:2017 is applicable to all Arctic oil and gas operations from licence block acquisition through exploration, engineering design, construction, commissioning, operation, decommissioning and restoration. It covers the offshore or maritime environment, including for the purposes of this document, the fully marine and estuarine waters of the Arctic, whether frozen or ice-free. The environment includes all relevant physical, chemical and biological components. Monitoring methods for onshore (terrestrial) environments are not covered in this document, although onshore environments are included where monitoring is required at onshore locations in relation to an offshore development.
ISO 35103:2017 covers both monitoring of environmental aspects for normal, abnormal and emergency conditions, and monitoring of environmental impacts. It includes monitoring in near-field, far-field, transboundary and regional scales, but does not include global environmental monitoring.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20074:2019(Main)
Petroleum and natural gas industry - Pipeline transportation systems - Geological hazards risk management for onshore pipeline (ISO 20074:2019)
SIST EN ISO 20074:2019

This document specifies requirements and gives recommendations on the management of geohazard risks during the pipeline design, construction and operational periods.
This document is applicable to all operators and pipelines (existing and proposed/under construction).
This document applies to onshore gathering and transmission pipelines used in the petroleum and natural gas industries.
NOTE       This document is not applicable to piping and pipelines within well-defined plants and facilities, such as pump or compressor stations, processing facilities or refineries. It is assumed that the facility site as a whole will be subject to a separate geohazard assessment to evaluate applicable natural and man-made hazards. Nevertheless, this document can provide useful guidance for assessing the geohazard threat to facilities, including the pipelines within the facility.
This document is applicable to all reasonable and credible natural hazards induced by natural forces and hazards induced by human activity that manifest similarly to natural hazards collectively referred to as "geological hazards" or "geohazards", or through industry as attributed to "natural forces". Geohazards covered by this document include, but are not limited to (not given in order of significance):
—          mass wasting processes, including landslides, lateral spreads, rockfalls, debris flows, avalanches, and similar processes whether naturally occurring or anthropogenic;
—          land subsidence and/or sinkhole formation, whether naturally occurring such as from dissolution of salt or carbonate rock formations (karst formation) or human caused, such as from underground mining or withdrawal of subsurface fluids such as groundwater and oil and gas;
—          seismic hazards, such as ground shaking, fault rupture, liquefaction, flow failures and lateral spreading or associated secondary effects, such as seismically triggered landslides;
—          volcanic hazards, such as lahars, pyroclastic flows, lava flows, dam break, and volcanically induced seismicity (excluding ashfall), where such hazards can be reasonably predicted;
—          hydrologic processes, such as flooding, vertical scour of river bottoms, channel migration and bank erosion, channel avulsion, rapid lake drainage;
—          permafrost/periglacial processes and geothermal effects, such as thermal degradation, frost heave or thaw settlement, thermal erosion, thermokarst;
—          surface (overland), trench backfill, or earthwork fill erosion;
—          expansion or collapsing processes caused by expansive and collapsible soils, such as glaciomarine clays, collapsible loess, etc.
This document is not applicable to atmospheric/environmental effects, such as the following:
—          high winds induced from hurricanes and tornadoes and similar storms, except where such events are reasonably predictable and will induce geohazards such as landslides, erosion, etc.;
—          lightning;
—          forest or brush fires;
—          ashfall from volcanic eruptions.
Furthermore, this document is not applicable to cascading events, where one remote event leads to a chain of events that eventually induces a geohazard near the pipeline. It is only applicable to geohazards that directly affect the pipeline or RoW.

  • Standard
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day