CEN ISO/TS 3250:2022

Petroleum, petrochemical and natural gas industries - Calculation and reporting production efficiency in the operating phase (ISO/TS 3250:2021)

This document provides requirements and guidance for reporting of production performance data and production loss data in the operating phase by use of production loss categorization. It supplements the principles of ISO 20815:2018, Clause E.3 and Annex G by providing additional details.
This document focusses on installations and asset elements within the upstream business category. Business categories and associated installations and plants/units, systems and equipment classes are used in line with ISO 14224:2016, Annex A.
The production loss categories given in Annex A are given at a high taxonomic level and supplements the reporting of failure and maintenance parameters as defined in ISO 14224:2016, Annex B.

Erdöl-, petrochemische und Erdgasindustrie - Berechnung und Meldung der Produktionseffizienz in der Betriebsphase (ISO/TS 3250:2021)

Industries du pétrole, de la pétrochimie et du gaz naturel - Calcul et rapport d’efficacité de la production dans la phase d’exploitation (ISO/TS 3250:2021)

Petrokemična industrija ter industrija za predelavo nafte in zemeljskega plina - Izračun in poročanje o učinkovitosti proizvodnje v fazi obratovanja (ISO/TS 3250:2021)

Ta dokument vsebuje zahteve in navodila za poročanje podatkov o učinkovitosti proizvodnje ter podatkov o proizvodnih izgubah v fazi obratovanja z uporabo kategorizacije proizvodnih izgub. Podaja dodatne podrobnosti, s katerimi dopolnjuje načela iz točke E.3 in dodatka G k standardu ISO 20815:2018.
Ta dokument se osredotoča na naprave in elemente sredstev v poslovni kategoriji raziskav ter proizvodnje. Poslovne kategorije in z njimi povezane naprave ter obrati/enote, sistemi in razredi opreme se uporabljajo v skladu s standardom ISO 14224:2016, dodatek A.
Kategorije proizvodnih izgub, podane v dodatku A, so navedene na visoki taksonomski ravni ter dopolnjujejo poročanje o parametrih okvar in vzdrževanja, kot je opredeljeno v dodatku B k standardu ISO 14224:2016.

General Information

• Status: Published
• Publication Date: 28-Jun-2022
• ICS: 75.020 - Extraction and processing of petroleum and natural gas
• Technical Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Drafting Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 29-Jun-2022
• Due Date: 12-Sep-2023
• Completion Date: 29-Jun-2022
• Ref Project: SIST-TS CEN ISO/TS 3250:2022 - Petroleum, petrochemical and natural gas industries - Calculation and reporting production efficiency in the operating phase (ISO/TS 3250:2021)

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2022
Petrokemična industrija ter industrija za predelavo nafte in zemeljskega plina -
Izračun in poročanje o učinkovitosti proizvodnje v fazi obratovanja (ISO/TS
3250:2021)
Petroleum, petrochemical and natural gas industries - Calculation and reporting
production efficiency in the operating phase (ISO/TS 3250:2021)
Erdöl-, petrochemische und Erdgasindustrie - Berechnung und Meldung der
Produktionseffizienz in der Betriebsphase (ISO/TS 3250:2021)
Industries du pétrole, de la pétrochimie et du gaz naturel - Calcul et rapport d’efficacité
de la production dans la phase d’exploitation (ISO/TS 3250:2021)
Ta slovenski standard je istoveten z: CEN ISO/TS 3250:2022
ICS:
75.020 Pridobivanje in predelava Extraction and processing of
nafte in zemeljskega plina petroleum and natural gas
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

CEN ISO/TS 3250
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
June 2022
TECHNISCHE SPEZIFIKATION
ICS 75.020
English Version
Petroleum, petrochemical and natural gas industries -
Calculation and reporting production efficiency in the
operating phase (ISO/TS 3250:2021)
Industries du pétrole, de la pétrochimie et du gaz Erdöl-, petrochemische und Erdgasindustrie -
naturel - Calcul et rapport d'efficacité de la production Berechnung und Meldung der Produktionseffizienz in
dans la phase d'exploitation (ISO/TS 3250:2021) der Betriebsphase (ISO/TS 3250:2021)
This Technical Specification (CEN/TS) was approved by CEN on 20 June 2022 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 3250:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
The text of ISO/TS 3250:2021 has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries” of the
International Organization for Standardization (ISO) and has been taken over as CEN ISO/TS 3250:2022
by Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries” the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO/TS 3250:2021 has been approved by CEN as CEN ISO/TS 3250:2022 without any
modification.
TECHNICAL ISO/TS
SPECIFICATION 3250
First edition
2021-08
Petroleum, petrochemical and natural
gas industries — Calculation and
reporting production efficiency in the
operating phase
Industries du pétrole, de la pétrochimie et du gaz naturel — Calcul et
rapport d’efficacité de la production dans la phase d’exploitation
Reference number
ISO/TS 3250:2021(E)
©
ISO 2021
ISO/TS 3250:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

ISO/TS 3250:2021(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 1
3.1 Terms and definitions . 1
3.2 Abbreviations .12
4 Application .13
4.1 Users of this document .13
4.2 Framework conditions .14
4.2.1 General.14
4.2.2 Quality assurance .16
4.2.3 HSE considerations .16
4.2.4 Sustainability and climate change considerations .17
4.3 Business category .17
4.4 Overview of PE calculation and reporting work process .18
4.5 Limitations .19
4.6 PE data exchange between operators in benchmarking .20
5 Performance measures .20
5.1 General .20
5.2 Production efficiency .20
5.2.1 PE forecasting .20
5.2.2 PE calculation and reporting .21
5.2.3 Initial production performance .21
5.3 PE measurement .22
5.4 PE calculation methodology .23
5.4.1 PE calculation formula .23
5.4.2 PE boundary conditions and reporting period .23
5.5 Injection efficiency calculation formula .23
6 Production .24
6.1 General .24
6.2 Material balance.24
6.3 Export – measured product .25
6.4 Conversion factors for oil equivalents .26
6.5 Injection .26
6.6 Disposal – general .26
6.7 Disposal – flaring or venting of large volumes .26
6.7.1 Production facilities with a gas export route (to sales) .26
6.7.2 Production facilities with a gas injection route only.26
6.7.3 Production facilities with no gas export route or other gas disposal routes .27
6.7.4 Flaring restrictions .27
6.8 Disposal – venting of small volumes .27
6.9 Fuel .27
6.10 Import .27
6.11 Artificial lift .
...