Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009)

ISO 8752:2009 specifies the characteristics of slotted spring-type straight pins, made of steel or of austenitic or martensitic stainless steel, heavy duty, with nominal diameter from 1 mm to 50 mm inclusive.

Spannstifte (-hülsen) - Geschlitzt, schwere Ausführung (ISO 8752:2009)

Diese Internationale Norm legt die Eigenschaften von geschlitzten Spannstiften (-hülsen) aus Stahl oder aus
austenitischem bzw. martensitischem nichtrostenden Stahl in schwerer Ausführung mit einem Nenndurchmesser
d1 von 1 mm bis einschließlich 50 mm fest.
ANMERKUNG Die Nenndurchmesser wurden so gewählt, dass die Spannstifte ineinander geschoben oder mit Spannstiften
in leichter Ausführung nach ISO 13337 verbunden werden können.

Goupilles cylindriques creuses, dites goupilles élastiques - Série épaisse (ISO 8752:2009)

L'ISO 8752:2009 spécifie les caractéristiques des goupilles cylindriques creuses, dites goupilles élastiques, en acier, ou en acier inoxydable austénitique ou martensitique, série épaisse, d'un diamètre nominal compris entre 1 mm et 50 mm inclus.

Valjasto zviti vzmetni zatiči - Težka izvedba (ISO 8752:2009)

Ta mednarodni standard določa značilnosti valjasto zvitih vzmetnih zatičev z zarezami, izdelanih iz jekla, avstenitnega ali martenzitnega nerjavnega jekla, težke izvedbe, z nominalnim premerom (d1) od 1 mm do vključno 50 mm.

General Information

Status
Published
Publication Date
14-Jun-2009
Withdrawal Date
30-Dec-2009
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
15-Jun-2009
Completion Date
15-Jun-2009

Relations

Buy Standard

Standard
EN ISO 8752:2012
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 8752 rev:2008
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8752:2012
01-marec-2012
1DGRPHãþD
SIST EN ISO 8752:2001
9DOMDVWR]YLWLY]PHWQL]DWLþL7HåNDL]YHGED ,62
Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009)
Spannstifte (-hülsen) - Geschlitzt, schwere Ausführung (ISO 8752:2009)
Goupilles cylindriques creuses, dites goupilles élastiques - Série épaisse (ISO
8752:2009)
Ta slovenski standard je istoveten z: EN ISO 8752:2009
ICS:
21.060.50 =DWLþLåHEOML Pins, nails
SIST EN ISO 8752:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8752:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 8752:2012
EUROPEAN STANDARD
EN ISO 8752
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2009
ICS 21.060.50 Supersedes EN ISO 8752:1997
English Version
Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009)
Goupilles cylindriques creuses, dites goupilles élastiques - Spannstifte (-hülsen) - Geschlitzt, schwere Ausführung
Série épaisse (ISO 8752:2009) (ISO 8752:2009)
This European Standard was approved by CEN on 6 June 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8752:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 8752:2012
EN ISO 8752:2009 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 8752:2012
EN ISO 8752:2009 (E)
Foreword
This document (EN ISO 8752:2009) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2009, and conflicting national standards shall be withdrawn
at the latest by December 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8752:1997.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 8752:2009 has been approved by CEN as a EN ISO 8752:2009 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 8752:2012

---------------------- Page: 6 ----------------------

SIST EN ISO 8752:2012

INTERNATIONAL ISO
STANDARD 8752
Third edition
2009-06-15

Spring-type straight pins — Slotted,
heavy duty
Goupilles cylindriques creuses, dites goupilles élastiques — Série
épaisse




Reference number
ISO 8752:2009(E)
©
ISO 2009

---------------------- Page: 7 ----------------------

SIST EN ISO 8752:2012
ISO 8752:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloa
...

SLOVENSKI STANDARD
oSIST prEN ISO 8752 rev:2008
01-februar-2008
9DOMDVWR]YLWLY]PHWQL]DWLþL7HåNDL]YHGED
Spring-type straight pins - Slotted, heavy duty
Ta slovenski standard je istoveten z: prEN ISO 8752 rev
ICS:
21.060.50
oSIST prEN ISO 8752 rev:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
DRAFT
prEN ISO 8752
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2007
ICS 21.060.50 Will supersede EN ISO 8752:1997
English Version
Spring-type straight pins - Slotted, heavy duty (ISO/DIS
8752:2007)
Goupilles cylindriques creuses, dites goupilles élastiques - Spannstifte (-hülsen) - Geschlitzt, schwere Ausführung
Série épaisse (ISO/DIS 8752:2007) (ISO/DIS 8752:2007)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 185.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
: This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
Warning
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 8752:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------
prEN ISO 8752:2007 (E)
Contents Page
Foreword.3

2

---------------------- Page: 3 ----------------------
prEN ISO 8752:2007 (E)
Foreword
This document (prEN ISO 8752:2007) has been prepared by Technical Committee ISO/TC 2 “Fasteners” in
collaboration with Technical Committee CEN/TC 185 " Fasteners", the secretariat of which is held by DIN.

This document is currently submitted to the parallel Enquiry.

This document will supersede EN ISO 8752:1997
Endorsement notice
The text of ISO/DIS 8752:2007 has been approved by CEN as a prEN ISO 8752:2007 without any
modification.

3

---------------------- Page: 4 ----------------------
DRAFT INTERNATIONAL STANDARD ISO/DIS 8752
ISO/TC 2/SC 10 Secretariat: DIN
Voting begins on: Voting terminates on:
2007-11-08 2008-04-08
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Spring-type straight pins — Slotted, heavy duty
Goupilles cylindriques creuses, dites goupilles élastiques — Série épaisse
[Revision of second edition (ISO 8752:1997)]
ICS 21.060.50

ISO/CEN PARALLEL ENQUIRY
The CEN Secretary-General has advised the ISO Secretary-General that this ISO/DIS covers a subject
of interest to European standardization. In accordance with the ISO-lead mode of collaboration as
defined in the Vienna Agreement, consultation on this ISO/DIS has the same effect for CEN
members as would a CEN enquiry on a draft European Standard. Should this draft be accepted, a
final draft, established on the basis of comments received, will be submitted to a parallel two-month FDIS
vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.