EN 61858:2008

Electrical insulation systems - Thermal evaluation of modifications to an established wire-wound EIS

IEC 61858:2008 lists the required test procedures for qualification of modifications of an established electrical insulation system (EIS) with respect to its thermal classification. This standard is applicable to EIS used in wire-wound electrotechnical devices. The test procedures are comparative in that the performance of a candidate EIS is compared to that of a reference EIS, which has proven service experience in accordance with IEC 60505 or has been evaluated by one of the procedures given in the IEC 61857 series. This third edition cancels and replaces the second edition, published in 2004 by IEC TC 98: Electrical insulation systems (EIS). It constitutes an editorial revision.

Elektrische Isoliersysteme - Thermische Bewertung von Veränderungen an einem erprobten, drahtgewickelten EIS

Systèmes d’isolation électriques - Evaluation thermique des modifications apportées à un système d’isolation électrique éprouvé à enroulements à fil

La CEI 61858:2008 indique les procédures d'essai requises pour la qualification des modifications qui ont été apportées à un système d'isolation électrique éprouvé (SIE), pour ce qui concerne sa classification thermique. Cette norme s'applique aux systèmes d'isolation électrique existant dans les dispositifs électrotechniques à enroulements à fils. Les procédures d'essai se font par comparaison des performances d'un système d'isolation électrique candidat avec celles d'un système d'isolation électrique de référence dont l'expérience en service a été démontrée conformément à la CEI 60505, ou qui a été évalué par une des procédures décrites dans la série 61857. Cette troisième édition annule et remplace la seconde édition, publiée en 2004 par le comité d'études 98 de la CEI: Systèmes d'isolation électrique (SIE). Elle constitue une révision rédactionnelle.

Sistemi električne izolacije - Toplotno vrednotenje sprememb preverjenega sistema električne izolacije z žičnim navitjem (IEC 61858:2008)

General Information

• Status: Withdrawn
• Publication Date: 08-Oct-2008
• Withdrawal Date: 31-Aug-2011
• ICS: 29.080.30 - Insulation systems
• Technical Committee: CLC/SR 112 - Evaluation and qualification of electrical insulating materials and systems (to be defined)
• Drafting Committee: IEC/TC 112 - IEC_TC_112
• Parallel Committee: IEC/TC 112 - IEC_TC_112
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 19-Mar-2017
• Completion Date: 19-Mar-2017
• Ref Project: SIST EN 61858:2008 - Electrical insulation systems - Thermal evaluation of modifications to an established wire-wound EIS (IEC 61858:2008)

Relations

• Replaces: EN 61858:2005 - Electrical insulation systems - Thermal evaluation of modifications to an established wire-wound EIS
• Effective Date: 29-Jan-2023
• Replaced By: EN 61858-1:2014 - Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2008
1DGRPHãþD
SIST EN 61858:2005
6LVWHPLHOHNWULþQHL]RODFLMH7RSORWQRYUHGQRWHQMHVSUHPHPESUHYHUMHQHJD
VLVWHPDHOHNWULþQHL]RODFLMH]åLþQLPQDYLWMHP,(&
Electrical insulation systems - Thermal evaluation of modifications to an established wire-
wound EIS (IEC 61858:2008)
Elektrische Isoliersysteme - Thermische Bewertung von Veränderungen an einem
erprobten, drahtgewickelten EIS (IEC 61858:2008)
Systèmes d’isolation électrique - Evaluation thermique des modifications apportées à un
système d’isolation électrique éprouvé à enroulements à fil (CEI 61858:2008)
Ta slovenski standard je istoveten z: EN 61858:2008
ICS:
29.080.30 Izolacijski sistemi Insulation systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61858
NORME EUROPÉENNE
October 2008
EUROPÄISCHE NORM
ICS 29.080.30 Supersedes EN 61858:2005

English version
Electrical insulation systems -
Thermal evaluation of modifications to an established wire-wound EIS
(IEC 61858:2008)
Systèmes d’isolation électriques -  Elektrische Isoliersysteme -
Evaluation thermique des modifications Thermische Bewertung
apportées à un système d’isolation von Veränderungen an einem erprobten,
électrique éprouvé à enroulements à fil drahtgewickelten EIS
(CEI 61858:2008) (IEC 61858:2008)

This European Standard was approved by CENELEC on 2008-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61858:2008 E
Foreword
The text of document 112/90/CDV, future edition 3 of IEC 61858, prepared by IEC TC 112, Evaluation
and qualification of electrical insulating materials and systems, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 61858 on 2008-09-01.
This European Standard supersedes EN 61858:2005.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61858:2008 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60317-24 NOTE  Harmonized as EN 60317-24:1995 (not modified).
__________
- 3 - EN 61858:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60085 2007 Electrical insulation - Thermal evaluation and EN 60085 2008
designation
1) 2)
IEC 60172 - Test procedure for the determination of the EN 60172 1994
temperature index of enamelled winding wires

1) 2)
IEC 60216-5 - Electrical insulating materials - Thermal EN 60216-5 2008
endurance properties -
Part 5: Determination of relative thermal
endurance index (RTE) of an insulating
material
1)
IEC 60317-3 - Specifications for particular types of winding - -
wires -
Part 3: Polyester enamelled round copper
wire, class 155
1) 2)
IEC 60317-4 - Specifications for particular types of winding EN 60317-4 1994
wires -
Part 4: Solderable polyurethane enamelled
round copper wire, class 130
1) 2)
IEC 60317-7 - Specifications for particular types of winding HD 555.7 S2 1992
wires -
Part 7: Polyimide enamelled round copper
wire, class 220
1) 2)
IEC 60317-8 - Specifications for particular types of winding EN 60317-8 1994
wires -
Part 8: Polyesterimide enamelled round
copper wire, class 180
1) 2)
IEC 60317-13 - Specifications for particular types of winding EN 60317-13 1994
wires -
Part 13: Polyester or polyesterimide
overcoated with polyamide-imide enamelled
round copper wire, class 200
1) 2)
IEC 60317-15 - Specifications for particular types of winding EN 60317-15 2004
wires -
Part 15: Polyesterimide enamelled round
aluminium wire, class 180
1) 2)
IEC 60317-16 - Specifications for particular types of winding HD 555.16 S2 1992
wires -
Part 16: Polyester enamelled rectangular
copper wire, class 155
1)
Undated reference.
2)
Valid edition at date of issue.

Publication Year Title EN/HD Year

1) 2)
IEC 60317-19 - Specifications for particular types of winding EN 60317-19 1995
wires -
Part 19: Solderable polyurethane enamelled
round copper wire overcoated with polyamide,
class 130
1) 2)
IEC 60317-20 - Specifications for particular types of winding EN 60317-20 1995
wires -
Part 20: Solderable polyurethane enamelled
round copper wire, class 155
1) 2)
IEC 60317-21 - Specifications for particular types of winding EN 60317-21 1995
wires -
Part 21: Solderable polyurethane enamelled
round copper wire overcoated with polyamide,
class 155
1) 2)
IEC 60317-22 - Specifications for particular types of winding EN 60317-22 2004
wires -
Part 22 : Polyester or polyesterimide
enamelled round copper wire overcoated with
polyamide, class 180
1) 2)
IEC 60317-23 - Specifications for particular types of winding EN 60317-23 1995
wires -
Part 23: Solderable polyesterimide enamelled
round copper wire, class 180
1) 2)
IEC 60317-25 - Specifications for particular types of winding EN 60317-25 1996
wires -
Part 25: Polyester or polyesterimide
overcoated with polyamide-imide enamelled
round aluminium wire, class 200

1) 2)
IEC 60317-29 - Specifications for particular types of winding EN 60317-29 1996
wires -
Part 29: Polyester or polyesterimide
overcoated with polyamide-imide enamelled
rectangular copper wire, class 200

1) 2)
IEC 60317-30 - Specifications for particular types of winding EN 60317-30 1996
wires -
Part 30: Polyimide enamelled rectangular
copper wire, class 220
1)
IEC 60317-34 - Specifications for particular types of winding - -
wires -
Part 34: Polyester enamelled round copper
wire, class 130 L
1) 2)
IEC 60317-42 - Specifications for particular types of winding EN 60317-42 1997
wires -
Part 42: Polyester-amide-imide enamelled
round copper wire, class 200
1) 2)
IEC 60317-46 - Specifications for particular types of winding EN 60317-46 1997
wires -
Part 46: Aromatic polyimide enamelled round
copper wire, class 240
1) 2)
IEC 60317-47 - Specifications for particular types of winding EN 60317-47 1997
wires -
Part 47: Aromatic polyimide enamelled
rectangular copper wire, class 240

- 5 - EN 61858:2008
Publication Year Title EN/HD Year

1) 2)
IEC 60317-51 - Specifications for particular types of winding EN 60317-51 2001
wires -
Part 51: Solderable polyurethane enamelled
round copper wire, class 180
1) 2)
IEC 60505 - Evaluation and qualification of electrical EN 60505 2004
insulation systems
1) 2)
IEC 61033 - Test methods for the determination of bond EN 61033 2006
strength of impregnating agents to an
enamelled wire substrate
IEC 61857 Series Electrical insulation systems - Procedures for EN 61857 Series
thermal evaluation
1) 2)
IEC 61857-1 - Electrical insulation systems - Procedures for EN 61857-1 2005
thermal evaluation -
Part 1: General requirements - Low-voltage

IEC 61858
Edition 3.0 2008-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electrical insulation systems – Thermal evaluation of modifications to an
established wire-wound EIS
Systèmes d’isolation électriques – Evaluation thermique des modifications
apportées à un système d’isolation électrique éprouvé à enroulements à fil

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
R
CODE PRIX
ICS 29.080.30 ISBN 2-8318-9946-X
– 2 – 61858 © IEC:2008
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope.6
2 Normative references .6
3 Terms and definitions .7
4 General considerations.8
5 Evaluation of the change of thickness of an EIM.10
5.1 Samples .10
5.2 Acceptance .10
6 Substitution of winding wire .10
6.1 General .10
6.2 Substitution of enamel.10
6.3 Substitution of conductor material .10
6.4 Alternate winding wire .10
7 Substitution of impregnating resin/varnish .11
7.1 Thermal class determination.11
7.2 Evaluation .11
7.2.1 Thermal classes equal or better.11
7.2.2 One thermal class lower .11
7.2.3 Other criteria .11
8 Substitution with other EIM.11
8.1 Technically equivalent materials.11
8.2 Previous evaluation .12
8.3 Other.12
9 Evaluation of additions .12
9.1 Addition of an impregnating resin/varnish .12
9.2 Addition of other components .12
10 Single-point thermal ageing test .12
10.1 Test objects.12
10.2 Establishing the EIS relative thermal endurance index (EIS RTE).12
10.3 Interpretation of results .13
Annex A (normative) Classes of winding wire.14
Annex B (normative) Compatibility test procedure.15
Bibliography.18

Figure 1 – Overview of evaluation methods.9

Tab
...