Fibre optic interconnecting devices and passive components - Performance standard - Part 091-02: Non-connectorized 3-port incompletely circulated single-mode fibre optic circulators for category C - Controlled environments

This part of IEC 61753 contains the minimum test and measurement requirements and severities which a fibre optic circulator as specified by IEC 62077 should satisfy in order to be categorized as meeting the requirements of circulators used in controlled environments as specified in IEC 61753-1:2018, COR1:2019 and AMD1:2020. The requirements cover non-connectorized single-mode fibre 3-port incompletely circulated type optical circulators for category C used in controlled environments.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 091-02: Nicht mit Steckverbindern versehene unvollständig umlaufende Einmoden-Lichtwellenleiter-Zirkulatoren mit 3 Anschlüssen für die Kategorie C - Kontrollierte Umgebung

Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance - Partie 091-02: Circulateurs fibroniques à circulation partielle à 3 ports, non connectorisés et équipés de fibres optiques unimodales, pour la catégorie C - Environnements contrôlés

IEC 61753-091-02:2022 contient les sévérités et les exigences minimales d'essai et de mesure auxquelles un circulateur fibronique tel que spécifié dans l’IEC 62077 est censé satisfaire afin d'être classé comme conforme aux exigences des circulateurs utilisés dans des environnements contrôlés, tels que spécifiés dans l’IEC 61753-1:2018 et l’IEC 61753‑1:2018/AMD1:2020. Les exigences couvrent les circulateurs optiques à circulation partielle à 3 ports, non connectorisés et équipés de fibres optiques unimodales, pour la catégorie°C, utilisés dans des environnements contrôlés. Cette première édition annule et remplace l'IEC 61753-091-2 parue en 2012. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’IEC 61753‑091‑2: a) modification du titre pour ajouter le type à circulation partielle à 3 ports; b) harmonisation des termes et définitions avec ceux de l’IEC 61977 et de l’IEC TS 62627‑09; c) harmonisation des éléments soumis à essai et des conditions d’essai avec l’IEC 61753‑1:2018 et l’IEC 61753‑1:2018/AMD1:2020.

Optični spojni elementi in pasivne komponente - Izvedbeni standard - 091-02. del: 3-portni optični nepopolno zaokroženi enorodovni cirkulatorji brez konektorjev za kategorijo C - Nadzorovana okolja (IEC 61753-091-02:2022)

Ta del standarda IEC 61753 vsebuje minimalne zahteve za preskuse in meritve ter stopnje zahtevnosti, ki jih naj v skladu s standardom IEC 62077 izpolnjujejo cirkulatorji za optična vlakna, da bodo izpolnjevali zahteve za cirkulatorje, ki se uporabljajo v nadzorovanem okolju v skladu s standardoma IEC 61753-1:2018, COR1:2019 in AMD1:2020. Zahteve obravnavajo 3-portne optične nepopolno zaokrožene enorodovne cirkulatorje brez konektorjev za kategorijo C, ki se uporabljajo v nadzorovanih okoljih.

General Information

Status
Published
Publication Date
31-Mar-2022
Current Stage
6060 - Document made available - Publishing
Start Date
01-Apr-2022
Completion Date
01-Apr-2022

Relations

Buy Standard

Standard
EN IEC 61753-091-02:2022
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61753-091-02:2022
01-junij-2022
Nadomešča:
SIST EN 61753-091-2:2013
Optični spojni elementi in pasivne komponente - Izvedbeni standard - 091-02. del:
3-portni optični nepopolno zaokroženi enorodovni cirkulatorji brez konektorjev za
kategorijo C - Nadzorovana okolja (IEC 61753-091-02:2022)
Fibre optic interconnecting devices and passive components - Performance standard -
Part 091-02: Non-connectorized 3-port incompletely circulated single-mode fibre optic
circulators for category C - Controlled environments (IEC 61753-091-02:2022)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
091-02: Nicht mit Steckverbindern versehene unvollständig umlaufende  Einmoden-
Lichtwellenleiter-Zirkulatoren mit 3 Anschlüssen für die Kategorie C - Kontrollierte
Umgebung (IEC 61753-091-02:2022)
Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance -
Partie 091-02: Circulateurs fibroniques à circulation partielle à 3 ports, non connectorisés
et équipés de fibres optiques unimodales, pour la catégorie C - Environnements
contrôlés (IEC 61753-091-02:2022)
Ta slovenski standard je istoveten z: EN IEC 61753-091-02:2022
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 61753-091-02:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61753-091-02:2022

---------------------- Page: 2 ----------------------
SIST EN IEC 61753-091-02:2022


EUROPEAN STANDARD EN IEC 61753-091-02

NORME EUROPÉENNE

EUROPÄISCHE NORM April 2022
ICS 33.180.20 Supersedes EN 61753-091-2:2013 and all of its
amendments and corrigenda (if any)
English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 091-02: Non-connectorized 3-port
incompletely circulated single-mode fibre optic circulators for
category C - Controlled environments
(IEC 61753-091-02:2022)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Norme de performance - Partie 091-02: Bauteile - Betriebsverhalten - Teil 091-02: Nicht mit
Circulateurs fibroniques à circulation partielle à 3 ports, non Steckverbindern versehene unvollständig umlaufende
connectorisés et équipés de fibres optiques unimodales, Einmoden-Lichtwellenleiter-Zirkulatoren mit 3 Anschlüssen
pour la catégorie C - Environnements contrôlés für die Kategorie C - Kontrollierte Umgebung
(IEC 61753-091-02:2022) (IEC 61753-091-02:2022)
This European Standard was approved by CENELEC on 2022-03-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61753-091-02:2022 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61753-091-02:2022
EN IEC 61753-091-02:2022 (E)
European foreword
The text of document 86B/4555/FDIS, future edition 1 of IEC 61753-091-02, prepared by SC 86B
"Fibre optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61753-091-
02:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-12-23
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-03-23
document have to be withdrawn

This document s
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.