Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock

IEC 61300-2-9: 2017(E) defines a test method to reveal mechanical weakness and/or degradation of fibre optic devices when subjected to repetitive or non-repetitive mechanical shocks. It simulates infrequent repetitive or non-repetitive shocks likely to be encountered in normal service or during transportation. This third edition cancels and replaces the second edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - inserted clause "Terms and definitions"; - added precise descriptions to clause "Apparatus"; - added sub clause "Testing" into clause "Procedure"; - added "Bibliography". Keywords: degradation of fibre optic devices, vibration test, transport test

Lichtwellenleiter - Verbindungselemente und passive Bauelemente - Grundlegende Prüf- und Messverfahren - Teil 2-9: Prüfungen - Schocken

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-9: Essais - Chocs

IEC 61300-2-9:2017 définit une méthode d’essai destinée à mettre en évidence les faiblesses mécaniques et/ou les dégradations des dispositifs fibroniques lorsque ceux-ci sont soumis à des chocs mécaniques, répétitifs ou non. Cette procédure consiste à simuler les chocs peu fréquents, répétitifs ou non, qui sont susceptibles de se produire dans des conditions normales de fonctionnement ou au cours du transport. Cette troisième édition annule et remplace la deuxième édition parue en 2010. Cette édition constitue une révision technique.Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: article inséré «Termes et définitions», descriptions précises ajoutées à l’article «Appareillage».

Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 2-9. del: Preskusi - Šok (IEC 61300-2-9:2017)

Ta del standarda IEC 61300 določa preskusne metode za odkrivanje mehanskih šibkosti in/ali poslabšanja delovanja optičnih naprav, ki so izpostavljene neprekinjenim ali enkratnim mehanskim šokom. Standard simulira redke neprekinjene ali enkratne šoke, ki se lahko pojavijo pri običajnem obratovanju naprav ali med prevozom.

General Information

Status
Published
Publication Date
23-Mar-2017
Withdrawal Date
09-Feb-2018
Current Stage
6060 - Document made available - Publishing
Start Date
24-Mar-2017
Completion Date
24-Mar-2017

Relations

Buy Standard

Standard
EN 61300-2-9:2017 - BARVE
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-2-9:2017
01-maj-2017
1DGRPHãþD
SIST EN 61300-2-9:2011
SIST EN 61300-2-9:2011/AC:2011
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2VQRYQLSUHVNXVQLLQPHULOQL
SRVWRSNLGHO3UHVNXVLâRN ,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-9: Tests - Shock (IEC 61300-2-9:2017)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-9: Untersuchungen und Messungen - Schock (IEC 61300-2-
9:2017)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 2-9: Essais - Chocs (IEC 61300-2-
9:2017)
Ta slovenski standard je istoveten z: EN 61300-2-9:2017
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-2-9:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61300-2-9:2017

---------------------- Page: 2 ----------------------

SIST EN 61300-2-9:2017


EUROPEAN STANDARD EN 61300-2-9

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2017
ICS 33.180.20 Supersedes EN 61300-2-9:2010
English Version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures - Part 2-9: Tests -
Shock
(IEC 61300-2-9:2017)
Dispositifs d'interconnexion et composants passifs à fibres Lichtwellenleiter - Verbindungselemente und passive
optiques - Méthodes fondamentales d'essais et de mesures Bauelemente - Grundlegende Prüf- und Messverfahren -
- Partie 2-9: Essais - Chocs Teil 2-9: Prüfungen - Schocken
(IEC 61300-2-9:2017) (IEC 61300-2-9:2017)
This European Standard was approved by CENELEC on 2017-02-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61300-2-9:2017 E

---------------------- Page: 3 ----------------------

SIST EN 61300-2-9:2017
EN 61300-2-9:2017
European foreword
The text of document 86B/3979/CDV, future edition 3 of IEC 61300-2-9, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61300-2-9:2017.
The following dates are fixed:
(dop) 2017-11-10
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2018-02-10
the document have to be withdrawn

This document supersedes EN 61300-2-9:2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61300-2-9:2017 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-2-27:2008 NOTE Harmonized as EN 60068-2-27:2009.
IEC 60068-2-47:2005 NOTE Harmonized as EN 60664-1:2007.
IEC 61300-3-3 NOTE Harmonized as EN 61300-3-3.
2

---------------------- Page: 4 ----------------------

SIST EN 61300-2-9:2017
EN 61300-2-9:2017

Annex ZA
(normative)
Normative references to international publications
with their corresponding E
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.