EN 61290-10-3:2003
(Main)Optical amplifiers - Test methods - Part 10-3: Multichannel parameters - Probe methods
Optical amplifiers - Test methods - Part 10-3: Multichannel parameters - Probe methods
This part of 61290 applies to commercially available optical fibre amplifiers (OFAs) using active fibres containing rare-earth dopants. This standard establishes uniform requirements for accurate and reliable measurements of the multichannel gain and noise paramenters as defined in EN 61292-4.
Prüfverfahren für Lichtwellenleiter-Verstärker - Teil 10-3: Mehrkanalparameter - Sondenmessverfahren
Amplificateurs optiques - Méthodes d'essai - Partie 10-3: Paramètres à canaux multiples - Méthodes par sondage
S'applique aux amplificateurs à fibres optiques (AFO), actuellement disponibles sur le marché, qui utilisent des fibres actives dopées aux terres rares. Etablit des prescriptions uniformes en vue de mesures précises et fiables des paramètres de gain et de bruit à canaux multiples tels que définis dans CEI 61291-4.
Optični ojačevalci – Preskusne metode – 10-3. del: Parametri z več kanali - Metode merjenja s sondami (IEC 61290-10-3:2002)*
General Information
Standards Content (Sample)
SLOVENSKI SIST EN 61290-10-3:2004
STANDARD
september 2004
Optični ojačevalci – Preskusne metode – 10-3. del: Parametri z več kanali -
Metode merjenja s sondami (IEC 61290-10-3:2002)*
Optical amplifiers - Test methods - Part 10-3: Multichannel parameters - Probe
methods (IEC 61290-10-3:2002)
ICS 33.180.30 Referenčna številka
SIST EN 61290-10-3:2004(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 61290-10-3
NORME EUROPÉENNE
EUROPÄISCHE NORM July 2003
ICS 33.180.20
English version
Optical amplifiers -
Test methods
Part 10-3: Multichannel parameters -
Probe methods
(IEC 61290-10-3:2002)
Amplificateurs optiques - Prüfverfahren für
Méthodes d'essai Lichtwellenleiter-Verstärker
Partie 10-3: Paramètres à canaux Teil 10-3: Mehrkanalparameter -
multiples - Sondenmessverfahren
Méthodes par sondage (IEC 61290-10-3:2002)
(CEI 61290-10-3:2002)
This European Standard was approved by CENELEC on 2003-02-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61290-10-3:2003 E
---------------------- Page: 2 ----------------------
EN 61290-10-3:2003 - 2 -
Foreword
The text of document 86C/459/FDIS, future edition 1 of IEC 61290-10-3, prepared by SC 86C, Fibre
optic systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 61290-10-3 on 2003-02-01.
This standard shall be read in conjunction with EN 61291-1:1998 and EN 61290-3:2000
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-02-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-02-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annex ZA is normative and annexes A and B are informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61290-10-3:2002 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60825-1 NOTE Harmonized as EN 60825-1:1994 (not modified).
IEC 60825-2 NOTE Harmonized as EN 60825-2:2000 (not modified).
IEC 60874-1 NOTE Harmonized as EN 60874-1:1999 (not modified).
__________
---------------------- Page: 3 ----------------------
- 3 - EN 61290-10-3:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 61290-3 - Optical fibre amplifiers - Basic EN 61290-3 2000
specification
Part 3: Test m
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.