EN IEC 62149-3:2023
(Main)Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems
Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems
IEC 62149-3: 2023 covers the performance specification for electroabsorption (EA) type optical modulators monolithically integrated with laser diodes for 40 Gbit/s fibre optic transmission systems. This document contains definitions for product performance requirements as well as a series of tests and measurements, for which clearly defined conditions, severities and pass/fail criteria are provided. The tests are intended to be run as an initial design verification to prove any product's ability to satisfy this document's requirements. This document is applicable for on-off keying modulation formats. A product that has been shown to meet all the requirements of a performance standard can be declared as compliant with the performance standard but will then be controlled by a quality assurance program. This fourth edition cancels and replaces the third edition published in 2020. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) specification of pull force for fibre pull test in Table 6 according to fibre type; b) change of symbol for kink free radiant power in Table 4 and Table 5; c) replacement of undefined symbols in Table 7; d) addition of IEC 62149-1 as a normative reference.
Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhaltensnormen - Teil 3: Modulator-integrierte Laserdioden-Sender für 40 Gbit/s-Lichtwellenleiter-Übertragungssysteme
Composants et dispositifs actifs fibroniques - Normes de performances - Partie 3: Émetteurs à diodes laser à modulateur intégré pour systèmes de transmission fibroniques 40 Gbit/s
IEC 62149-3: 2023 couvre les spécifications de performance concernant les modulateurs optiques à électroabsorption (EA) avec diodes laser intégrées de façon monolithique, destinés à des systèmes de transmission fibroniques 40 Gbit/s. Le présent document contient des définitions des exigences de performances de produits, ainsi qu’une série d’essais et de mesures, avec des conditions, des sévérités et des critères d’acceptation/de rejet clairement définis. Les essais sont destinés à être réalisés à titre de vérification initiale de conception, pour prouver la capacité d’un quelconque produit à satisfaire aux exigences du présent document. Le présent document s’applique aux formats de modulation tout ou rien. Un produit qui a montré qu’il satisfaisait à toutes les exigences d’une norme de performance peut être déclaré comme conforme à la norme de performance, mais il est ensuite contrôlé selon un programme d’assurance de la qualité. Cette quatrième édition annule et remplace la troisième édition parue en 2020. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) spécification de la force de traction pour l’essai de traction sur fibre dans le Tableau 6 selon le type de fibre; b) modification du symbole pour la puissance rayonnée sans non-linéarité dans le Tableau 4 et dans le Tableau 5; c) remplacement des symboles non définis dans le Tableau 7; d) ajout de l’IEC 62149-1 comme référence normative.
Optične aktivne komponente in naprave - Izvedbeni standardi - 3. del: Laserski diodni oddajniki z integriranim modulatorjem za optične prenosne sisteme 40 Gbit/s (IEC 62149-3:2023)
Ta del standarda IEC 62149 zajema specifikacijo delovanja za elektroabsorpcijske (EA) optične modulatorje z monolitno integriranimi laserskimi diodami za 40-Gbit/s sisteme za prenos optičnih vlaken. Ta dokument vsebuje opredelitve zahtev glede učinkovitosti izdelka ter vrsto preskusov in meritev, za katere so jasno opredeljeni pogoji, zahtevnost in merila za uspešno/neuspešno opravljen preskus. Preskusi so namenjeni preverjanju začetnega projektiranja, s katerim se dokaže, ali lahko izdelek izpolnjuje zahteve tega dokumenta.
Ta dokument se uporablja za vklopno-izklopne formate modulacije.
Izdelek, ki dokazano izpolnjuje vse zahteve izvedbenega standarda, je mogoče šteti za skladen z izvedbenim standardom, vendar ga bo v tem primeru nadzoroval program za zagotavljanje skladnosti.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 62149-3:2023
01-oktober-2023
Optične aktivne komponente in naprave - Izvedbeni standardi - 3. del: Laserski
diodni oddajniki z integriranim modulatorjem za optične prenosne sisteme 40
Gbit/s (IEC 62149-3:2023)
Fibre optic active components and devices - Performance standards - Part 3: Modulator-
integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems (IEC
62149-3:2023)
Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhalten - Teil 3: Sender mit
modulatorintegrierten Laserdioden für 40 Gbit/s-Lichtwellenleiter-Übertragungssysteme
(IEC 62149-3:2023)
Composants et dispositifs actifs fibroniques - Normes de performances - Partie 3:
Émetteurs à diodes laser à modulateur intégré pour systèmes de transmission
fibroniques 40 Gbit/s (IEC 62149-3:2023)
Ta slovenski standard je istoveten z: EN IEC 62149-3:2023
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 62149-3:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62149-3:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 62149-3:2023
EUROPEAN STANDARD EN IEC 62149-3
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2023
ICS 33.180.20 Supersedes EN IEC 62149-3:2020;
EN IEC 62149-3:2020/AC:2021-03
English Version
Fibre optic active components and devices - Performance
standards - Part 3: Modulator-integrated laser diode transmitters
for 40-Gbit/s fibre optic transmission systems
(IEC 62149-3:2023)
Composants et dispositifs actifs fibroniques - Normes de Aktive Lichtwellenleiterbauelemente und -geräte -
performances - Partie 3: Émetteurs à diodes laser à Betriebsverhaltensnormen - Teil 3: Modulator-integrierte
modulateur intégré pour systèmes de transmission Laserdioden-Sender für 40 Gbit/s-Lichtwellenleiter-
fibroniques 40 Gbit/s Übertragungssysteme
(IEC 62149-3:2023) (IEC 62149-3:2023)
This European Standard was approved by CENELEC on 2023-08-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62149-3:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62149-3:2023
EN IEC 62149-3:2023 (E)
European foreword
The text of document 86C/1839/CDV, future edition 4 of IEC 62149-3, prepared by SC 86C "Fibre
optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 62149-3:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-05-23
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-08-23
document have to be withdrawn
This document supersedes EN IEC 62149-3:2020 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62149-3:2023 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.