Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)

Applies to control and protective switching devices (or equipment) (CPS), the main contacts of which are intended to be connected to circuits of rated voltage not exceeding 1 000 V a.c. or 1 500 V d.c. CPSs are intended to provide both protective and control functions for circuits and are operated otherwise than by hand. They may also fulfil additional functions, such as isolation.

Niederspannungsschaltgeräte - Teil 6-2: Mehrfunktions-Schaltgeräte - Steuer- und Schutz-Schaltgeräte (CPS)

Appareillage à basse tension - Partie 6-2: Matériels à fonctions multiples - Appareils (ou matériel) de connexion de commande et de protection (ACP)

Est applicable aux appareils (ou aux matériels) de connexion de commande et de protection (ACP), dont les contacts principaux sont destinés à être reliés à des circuits dont la tension assignée n'est pas supérieure a 1 000 V en courant alternatif ou 1 500 V en courant continu. Les ACP sont destinés à assurer à la fois les fonctions de commande et de protection et peuvent aussi assurer des fonctions complémentaires telles que le sectionnement.

Nizkonapetostne stikalne naprave – 6. del: Večfunkcijska oprema – 2. oddelek: Krmilne in zaščitne stikalne naprave (ali oprema) (CPS) (IEC 60947-6-2:2002)

General Information

Status
Published
Publication Date
03-Jun-2003
Withdrawal Date
31-Aug-2005
Current Stage
6060 - Document made available - Publishing
Start Date
04-Jun-2003
Completion Date
04-Jun-2003

Relations

Buy Standard

Standard
EN 60947-6-2:2003
English language
108 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 60947-6-2:2003

STANDARD
december 2003
1L]NRQDSHWRVWQHVWLNDOQHQDSUDYH±GHO9HþIXQNFLMVNDRSUHPD±
RGGHOHN.UPLOQHLQ]DãþLWQHVWLNDOQHQDSUDYH DOLRSUHPD  &36  ,(&
2:2002)
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment -
Control and protective switching devices (or equipment) (CPS) (IEC 60947-6-
2:2002)
ICS 5HIHUHQþQDãWHYLOND
29.130.20
SIST EN 60947-6-2:2003(en)
! "#$%!&!%’()*#+’

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60947-6-2
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2003

ICS 29.120.40; 29.130.20 Supersedes EN 60947-6-2:1993 + A1:1997 + A2:1999


English version


Low-voltage switchgear and controlgear
Part 6-2: Multiple function equipment –
Control and protective switching devices
(or equipment) (CPS)
(IEC 60947-6-2:2002)


Appareillage à basse tension Niederspannungsschaltgeräte
Partie 6-2: Matériels à fonctions multiples – Teil 6-2: Mehrfunktions-Schaltgeräte –
Appareils (ou matériel) de connexion de Steuer- und Schutz-Schaltgeräte (CPS)
commande et de protection (ACP) (IEC 60947-6-2:2002)
(CEI 60947-6-2:2002)






This European Standard was approved by CENELEC on 2002-09-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60947-6-2:2003 E

---------------------- Page: 2 ----------------------

EN 60947-6-2:2003 - 2 -
Foreword
The text of document 17B/1188/FDIS, future amendment to IEC 60947-6-2:1992, prepared by
SC 17B, Low-voltage switchgear and controlgear, of IEC TC 17, Switchgear and controlgear, was
submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A3 to
EN 60947-6:2:1993 on 2002-09-01.
The text of this document, together with that of IEC 60947-6-2:1992 and its amendments 1:1997 and
2:1998, was published by IEC as the second edition of IEC 60947-6-2 in October 2002. According to a
decision of principle taken by the Technical Board of CENELEC, the approval of
EN 60947-6-2:1993/A3 has been converted into the approval of a new EN 60947-6-2.
This European Standard supersedes EN 60947-6-2:1993 + corrigendum June 1997 + A1:1997 +
A2:1999.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2005-09-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annexes A, C and ZA are normative and annex D is informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60947-6-2:2002 was approved by CENELEC as a
European Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60947-6-2:2003
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicat
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.