EN 60893-3-5:2004

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins

Gives the requirements for industrial rigid laminated sheets for electrical purposes based on polyester resins and different reinforcements. Applications and distinguishing properties are given. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. In this revision of the EN 60893 series of specifications, new material types have been included, changes have been made to the property requirements of some existing types, a new method for testing permittivity and dissipation factor has been added, and all non-specification data for each type has been moved to a new Part 4 document - EN 60893-4: Typical values.

Isolierstoffe - Tafeln aus technischen Schichtpressstoffen auf der Basis warmhärtender Harze für elektrotechnische Zwecke - Teil 3-5: Bestimmungen für einzelne Werkstoffe - Anforderungen für Tafeln aus Schichtpressstoffen auf der Basis von Polyesterharzen

Matériaux isolants - Stratifiés industriels rigides en planches à base de résines thermodurcissables à usages électriques - Partie 3-5: Spécifications pour matériaux particuliers - Prescriptions pour stratifiés rigides en planches à base de résine polyester

Donne les prescriptions pour les stratifiés industriels rigides en planches à usages électriques, à base de résine polyester et de différents renforts. Leurs applications et propriétés distinctives sont indiquées. Les matériaux conformes à la présente spécification satisfont aux niveaux de performances établis. Cependant, il convient que le choix d'un matériau, par un utilisateur, pour une application spécifique, soit fondé sur les prescriptions réelles nécessaires pour obtenir les performances satisfaisantes pour cette application, et qu'il ne soit pas fondé sur cette seule spécification. Dans cette révision de la série de spécifications EN 60893, de nouveaux matériaux ont été introduits, des modifications ont été faites aux prescriptions pour les propriétés de certains types existants, une nouvelle méthode pour l'essai de la permittivité et du facteur de dissipation a été ajoutée et, pour chaque type, les valeurs n'étant pas des spécifications ont été déplacées dans un nouveau document de Partie 4 - EN 60893-4: Valeurs typiques.

Izolacijski materiali - Industrijske toge laminirane plošče iz smol s toplotnim utrjevanjem za električne namene - 3-6. del: Specifikacije za posamezne materiale - Zahteve za toge laminirane plošče na osnovi poliestrskih smol (IEC 60893-3-5:2003)

General Information

• Status: Published
• Publication Date: 21-Jan-2004
• Withdrawal Date: 30-Nov-2006
• ICS: 29.035.01 - Insulating materials in general
• Technical Committee: CLC/SR 15 - Insulating materials
• Drafting Committee: IEC/TC 15 - IEC_TC_15
• Parallel Committee: IEC/SC 15C - IEC_SC_15C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 22-Jan-2004
• Completion Date: 22-Jan-2004
• Ref Project: SIST EN 60893-3-5:2004 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins

Relations

• Replaces: EN 60893-3-5:1995 - Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 5: Requirements for rigid laminated sheets based on polyester resins
• Effective Date: 28-Jan-2023
• Amended By: EN 60893-3-5:2004/A1:2009 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 60893-3-5:2004

STANDARD
september 2004
Izolacijski materiali - Industrijske toge laminirane plošče iz smol s toplotnim
utrjevanjem za električne namene - 3-6. del: Specifikacije za posamezne
materiale - Zahteve za toge laminirane plošče na osnovi poliestrskih smol
(IEC 60893-3-5:2003)
Insulating materials - Industrial rigid laminated sheets based on thermosetting
resins for electrical purposes - Part 3-5: Specifications for individual materials -
Requirements for rigid laminated sheets based on polyester resins (IEC 60893-3-
5:2003)
ICS 29.035.20 Referenčna številka
SIST EN 60893-3-5:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60893-3-5
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2004

ICS 29.035.01 Supersedes EN 60893-3-5:1995

English version

Insulating materials –
Industrial rigid laminated sheets based on
thermosetting resins for electrical purposes
Part 3-5: Specifications for individual materials –
Requirements for rigid laminated sheets
based on polyester resins
(IEC 60893-3-5:2003)

Matériaux isolants –  Isolierstoffe –
Stratifiés industriels rigides en planches Tafeln aus technischen Schichtpress-
à base de résines thermodurcissables stoffen auf der Basis warmhärtender
à usages électriques Harze für elektrotechnische Zwecke
Partie 3-5: Spécifications pour matériaux Teil 3-5: Bestimmungen für einzelne
particuliers – Werkstoffe –
Prescriptions pour stratifiés rigides Anforderungen für Tafeln aus
en planches à base de résine polyester Schichtpressstoffen auf der Basis
(CEI 60893-3-5:2003) von Polyesterharzen
(IEC 60893-3-5:2003)


This European Standard was approved by CENELEC on 2003-12-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60893-3-5:2004 E

---------------------- Page: 2 ----------------------

EN 60893-3-5:2004 - 2 -
Foreword
The text of document 15C/1525/FDIS, future edition 2 of IEC 60893-3-5, prepared by SC 15C,
Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 60893-3-5 on 2003-12-01.
This European Standard supersedes EN 60893-3-5:1995.
In this revision of the EN 60893 series of specifications, new material types have been included,
changes have been made to the property requirements of some existing types, a new method for
testing permittivity and dissipation factor has been added, and all non-specification data for each type
has been moved to a new Part 4 document – IEC/TR 60893-4: Typical values.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-12-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60893-3-5:2003 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60893-3-1 NOTE Harmonized as EN 60893-3-1:2004 (not modified).
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60893-3-5:2004
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable
...