EN 62386-201:2015
(Main)Digital addressable lighting interface - Part 201: Particular requirements for control gear - Fluorescent lamps (device type 0)
Digital addressable lighting interface - Part 201: Particular requirements for control gear - Fluorescent lamps (device type 0)
IEC 62386-201:2015(E) is available as IEC 62386-201:2015 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 62386-201:2015(E) specifies a bus system for control by digital signals of electronic lighting equipment. This electronic lighting equipment should be in line with the requirements of IEC 61347. This document is applicable to control gear associated with fluorescent lamps. This second edition cancels and replaces the first edition published in 2009 and constitutes a technical revision. The essential changes with respect to the first edition are: - references to subclauses in IEC 62386-101 and IEC 62386-102 updated to the new structure of the standard; - test sequence reworked and description of the test sequences in form of a pseudo code instead of flow charts.
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 201: Besondere Anforderungen an Betriebsgeräte - Leuchtstofflampen (Gerätetyp 0)
Interface d'éclairage adressable numérique - Partie 201: Exigences particulières pour les appareillages de commande - Lampes fluorescentes (dispositifs de type 0)
L'IEC 62386-201:2015 spécifie un système de bus pour la commande par des signaux numériques des appareils d'éclairage électroniques. Il convient que ces appareils d'éclairage électroniques satisfassent aux exigences de l'IEC 61347. Le présent document est applicable aux appareillages de commande associés aux lampes fluorescentes. Cette deuxième édition annule et remplace la première édition de l'IEC 62386-201 parue en 2009. Cette édition constitue une révision technique. Les modifications majeures par rapport à la première édition sont les suivantes: - mise à jour des références aux paragraphes de l'IEC 62386-101 et de l'IEC 62386-102 pour tenir compte de la nouvelle structure de la norme; - amélioration des séquences d'essai et description des séquences d'essai sous la forme d'un pseudo-code au lieu d'organigrammes.
Digitalni naslovljivi vmesnik za razsvetljavo - 201. del: Posebne zahteve za krmilja - Fluorescentne sijalke (naprava tipa 0)
Ta del standarda IEC 62386 določa sistem vodil za krmiljenje elektronske opreme za razsvetljavo z digitalnimi signali. Ta elektronska oprema za razsvetljavo bi morala biti v skladu z zahtevami iz standarda IEC 61347. Ta dokument se uporablja s stikalnimi napravami, povezanimi s fluorescentnimi sijalkami.
OPOMBA: Preskusi, obravnavani v tem standardu, so tipski preskusi. Zahteve za preskušanje posameznih enot vodil med proizvodnjo
niso vključene.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2015
1DGRPHãþD
SIST EN 62386-201:2009
Digitalni naslovljivi vmesnik za razsvetljavo - 201. del: Posebne zahteve za krmilja -
Fluorescentne sijalke (naprava tipa 0)
Digital addressable lighting interface - Part 201: Particular requirements for control gear -
Fluorescent lamps (device type 0)
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 201: Besondere
Anforderungen an Betriebsgeräte - Leuchtstofflampen (Gerätetyp 0)
Interface d'éclairage adressable numérique - Partie 201: Exigences particulières pour les
appareillages - Lampes fluorescentes (dispositifs de type 0)
Ta slovenski standard je istoveten z: EN 62386-201:2015
ICS:
29.140.30 )OXRUHVFHQþQHVLMDONH6LMDONH Fluorescent lamps.
Discharge lamps
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62386-201
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2015
ICS 29.140.50; 29.140.99 Supersedes EN 62386-201:2009
English Version
Digital addressable lighting interface - Part 201: Particular
requirements for control gear - Fluorescent lamps (device type 0)
(IEC 62386-201:2015)
Interface d'éclairage adressable numérique - Partie 201: Digital adressierbare Schnittstelle für die Beleuchtung - Teil
Exigences particulières pour les appareillages - Lampes 201: Besondere Anforderungen an Betriebsgeräte -
fluorescentes (dispositifs de type 0) Leuchtstofflampen (Gerätetyp 0)
(IEC 62386-201:2015) (IEC 62386-201:2015)
This European Standard was approved by CENELEC on 2015-07-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62386-201:2015 E
European foreword
The text of document 34C/1082/CDV, future edition 2 of IEC 62386-201, prepared by
SC 34C "Auxiliaries for lamps" of IEC/TC 34 "Lamps and related equipment" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 62386-201:2015.
The following dates are fixed:
(dop) 2016-04-01
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2018-07-01
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62386-201:2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62386-201:2015 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61347 series Lamp controlgear EN 61347 series
IEC 62386-101 2014 Digital addressable lighting interface - Part EN 62386-101 2014
101: General requirements - System
Components
IEC 62386-102 2014 Digital addressable lighting interface - Part EN 62386-102 2014
102: General requirements - Control gear
IEC 62386-201 ®
Edition 2.0 2015-05
INTERNATIONAL
STANDARD
colour
inside
Digital addressable lighting interface –
Part 201: Particular requirements for control gear – Fluorescent lamps
(device type 0)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.140.50, 29.140.99 ISBN 978-2-8322-2690-2
– 2 – IEC 62386-201:2015 © IEC 2015
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 General . 6
5 Electrical specification . 7
6 Interface power supply . 7
7 Transmission protocol structure . 7
8 Timing . 7
9 Method of operation . 7
10 Declaration of variables . 7
11 Definition of commands . 8
12 Test procedures . 8
Figure 1 – IEC 62386 graphical overview . 5
Table 1 – Declaration of additional variables . 8
IEC 62386-201:2015 © IEC 2015 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DIGITAL ADDRESSABLE LIGHTING INTERFACE –
Part 201: Particular requirements for control gear –
Fluorescent lamps (device type 0)
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62386-201 has been prepared by subcommittee 34C: Auxiliaries
for lamps, of IEC technical committee 34: Lamps and related equipment.
This second edition cancels and replaces the first edition published in 2009 and constitutes a
technical revision. The essential changes with respect to the first edition are:
• references to subclauses in IEC 62386-101 and IEC 62386-102 updated to the new
structure of the standard;
• test sequence reworked and description of the test sequences in form of a pseudo code
instead of flow charts.
– 4 – IEC 62386-201:2015 © IEC 2015
The text of this standard is based on the following documents:
CDV Report on voting
34C/1082/CDV 34C/1103/RVC
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This Part 201 of IEC 62386 is intended to be used in conjunction with:
• IEC 62386-101, which contains general requirements for system components;
• IEC 62386-102, which contains general requirements for the control gear.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
IEC 62386-201:2015 © IEC 2015 – 5 –
INTRODUCTION
IEC 62386 contains several parts, referred to as series. The 1xx series includes the basic
specifications. Part 101 contains general requirements for system components, Part 102
extends this information with general requirements for control gear and Part 103 extends it
further with general requirements for control devices.
The 2xx parts extend the general requirements for control gear with lamp specific extensions
(mainly for backward compatibility with Edition 1 of IEC 62386) and with control gear specific
features.
The 3xx parts extend the general requirements for control devices with input device specific
extensions describing the instance types
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.