EN IEC 62386-306:2024
(Main)Digital addressable lighting interface - Part 306: Particular requirements - Input devices - General purpose sensor
Digital addressable lighting interface - Part 306: Particular requirements - Input devices - General purpose sensor
IEC 62386-306:2023 is applicable to input devices that provide sensor information or measurements to the lighting control system. This document is only applicable to input devices complying with IEC 62386-103.
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 306: Besondere Anforderungen - Eingabegeräte - Sensor für allgemeine Zwecke
Interface d'éclairage adressable numérique - Partie 306 : Exigences particulières - Dispositifs d'entrée - Capteur à usage général
L'IEC 62386-306:2023 s'applique aux dispositifs d'entrée qui fournissent des informations ou des mesures de capteurs au système de commande d'éclairage. Le présent document s'applique uniquement aux dispositifs d'entrée conformes à l'IEC 62386‑103.
Digitalni naslovljivi vmesnik za razsvetljavo - 306. del: Posebne zahteve - Vhodne naprave - Senzor za splošno uporabo (IEC 62386-306:2023)
Ta del standarda IEC 62386 se uporablja za vhodne naprave, ki sistemu za krmiljenje razsvetljave zagotavljajo senzorske informacije ali meritve.
Ta dokument se uporablja samo za vhodne naprave, ki so skladne s standardom IEC 62386-103.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2024
Digitalni naslovljivi vmesnik za razsvetljavo - 306. del: Posebne zahteve - Vhodne
naprave - Senzor za splošno uporabo (IEC 62386-306:2023)
Digital addressable lighting interface - Part 306: Particular requirements - Input devices -
General purpose sensor (IEC 62386-306:2023)
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 306: Besondere
Anforderungen - Eingabegeräte - Sensor für allgemeine Zwecke (IEC 62386-306:2023)
Interface d'éclairage adressable numérique - Partie 306 : Exigences particulières -
Dispositifs d'entrée - Capteur à usage général (IEC 62386-306:2023)
Ta slovenski standard je istoveten z: EN IEC 62386-306:2024
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62386-306
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2024
ICS 29.140.50; 29.140.99
English Version
Digital addressable lighting interface - Part 306: Particular
requirements - Input devices - General purpose sensor
(IEC 62386-306:2023)
Interface d'éclairage adressable numérique - Partie 306 : Digital adressierbare Schnittstelle für die Beleuchtung - Teil
Exigences particulières - Dispositifs d'entrée - Capteur à 306: Besondere Anforderungen - Eingabegeräte - Sensor
usage général für allgemeine Zwecke
(IEC 62386-306:2023) (IEC 62386-306:2023)
This European Standard was approved by CENELEC on 2024-01-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62386-306:2024 E
European foreword
The text of document 34/1132/FDIS, future edition 1 of IEC 62386-306, prepared by IEC/TC 34
"Lighting" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-10-10
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-01-10
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62386-306:2023 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 62386-101 2022 Digital addressable lighting interface - Part EN IEC 62386-101 2022
101: General requirements - System
components
IEC 62386-103 2022 Digital addressable lighting interface - Part EN IEC 62386-103 2022
103: General requirements - Control
devices
IEC 62386-333 2018 Digital addressable lighting interface - Part EN IEC 62386-333 2018
333: Particular requirements for control
devices - Manual configuration (feature
type 33)
IEC 62386-306 ®
Edition 1.0 2023-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Digital addressable lighting interface –
Part 306: Particular requirements – Input devices – General purpose sensor
Interface d'éclairage adressable numérique –
Partie 306: Exigences particulières – Dispositifs d'entrée – Capteur à usage
général
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.50, 29.140.99 ISBN 978-2-8322-7954-0
– 2 – IEC 62386-306:2023 © IEC 2023
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 9
2 Normative references . 9
3 Terms and definitions . 9
4 General . 10
4.1 General requirements . 10
4.2 Version number . 10
4.3 Insulation . 10
5 Electrical specification . 10
6 Bus power supply . 10
7 Transmission protocol structure . 10
8 Timing . 11
9 Method of operation . 11
9.1 General . 11
9.2 Instance type . 11
9.3 Input signal and value . 11
9.3.1 Input value . 11
9.3.2 Sensor start-up and invalid measurements . 12
9.3.3 Input signal range . 12
9.3.4 Minimum and maximum input values. 12
9.3.5 Measurement accuracy . 12
9.4 Events . 13
9.4.1 Priority use . 13
9.4.2 Bus usage . 13
9.4.3 Encoding . 13
9.4.4 Event configuration . 15
9.4.5 Event generation . 15
9.5 Configuring the input device . 19
9.5.1 Using the report timers . 19
9.5.2 Using the deadtime timer . 19
9.5.3 Setting the timers . 19
9.5.4 Setting the hysteresis . 20
9.5.5 Setting the alarm type . 21
9.5.6 Querying alarm status . 21
9.5.7 Setting the alarm levels . 21
9.5.8 Setting the alarm hysteresis . 24
9.5.9 Query sensor type . 24
9.5.10 Setting magnitude . 25
9.5.11 Manual configuration . 25
9.6 Exception handling. 25
9.6.1 Physical sensor failure . 25
9.6.2 Manufacturer-specific errors . 25
9.6.3 Error value . 25
10 Declaration of variables . 26
11 Definition of commands . 27
IEC 62386-306:2023 © IEC 2023 – 3 –
11.1 General . 27
11.2 Overview sheets . 28
11.2.1 General . 28
11.2.2 Standard commands . 28
11.3 Event messages . 28
11.3.1 INPUT NOTIFICATION (device/instance, event) . 28
11.3.2 POWER NOTIFICATION (device) . 28
11.4 Device control instructions . 28
11.5 Device configuration instructions . 28
11.6 Device queries . 29
11.7 Instance control instructions . 29
11.8 Instance configuration instructions . 29
11.8.1 General . 29
11.8.2 SET EVENT FILTER (DTR1:DTR0) . 29
11.8.3 SET REPORT TIMER (DTR0) . 29
11.8.4 SET ALARM REPORT TIMER (DTR0) . 29
11.8.5 SET HYSTERESIS (DTR0) . 29
11.8.6 SET DEADTIME TIMER (DTR0) .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.