EN IEC 60966-3-3:2023
(Main)Radio frequency and coaxial cable assemblies - Part 3-3: Detail specification for semi-flexible cable assemblies (jumper) - Frequency range up to 18 GHz, Type 50-141 semi-flexible coaxial cable
Radio frequency and coaxial cable assemblies - Part 3-3: Detail specification for semi-flexible cable assemblies (jumper) - Frequency range up to 18 GHz, Type 50-141 semi-flexible coaxial cable
This part of IEC 60966 is a detail specification that relates to semi-flexible cable assemblies composed of type 50-141 semi-flexible coaxial cables with polytetrafluoroethylene (PTFE) dielectric (IEC 61196-8-4) and connectors such as, type SMA(IEC 61169-15), type N (IEC 61169-16). It gives subfamily detail requirements and severities which shall be applied. These cable assemblies are mainly used in the field of microwave and wireless equipment or other signal transmission equipment or units. The operating frequency is up to 18000 MHz. The qualification will be conducted in accordance with IEC 60966-3. Once one variant obtain qualification approval, the other variant with same cable and connection type can obtain qualification approval by conducting tests whose results might depend on the variants. Under capability approval, the qualification will be conducted on the relating CQCs (capability qualifying components) as defined in IEC 60966-3 and described in the CM(capability manual). Unless otherwise specified in the CM, only lot-by-lot tests from groups Ba and Eb will be conducted on delivered products, all other tests will be performed on CQCs as defined in IEC 60966-3 and described in the CM.
Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 3-3: Bauartspezifikation für halbflexible konfektionierte Kabel (Rangierkabel), Frequenzbereich bis 18 GHz, Typ 50-141 halbflexible Koaxialkabel
Cordons coaxiaux et cordons pour fréquences radioélectriques - Partie 3-3: Spécification particulière relative aux cordons semi-flexibles (câble de liaison), plage de fréquences jusqu’à 18 GHz, câble coaxial semi-flexible de type 50-141
L’IEC 60966-3-3:2023 est une spécification particulière qui concerne les cordons semi-flexibles constitués de câbles coaxiaux semi-flexibles de type 50-141 à diélectriques en polytétrafluoroéthylène (PTFE) (IEC 61196-8-4) et de connecteurs tels que le type SMA (IEC 61169-15) et le type N (IEC 61169-16). Elle donne les exigences particulières et les sévérités de sous-famille à appliquer.
Sestavi radiofrekvenčnih in koaksialnih kablov - 3-3. del: Podrobna specifikacija za delno upogibljive kabelske sklope (prevezava), frekvenčno območje do 18 GHz, delno upogibljiv koaksialni kabel tipa 50-141 (IEC 60966-3-3:2023)
Ta del standarda IEC 60966 je podrobna specifikacija, ki se navezuje na delno upogibljive kabelske sklope, sestavljene iz delno upogljivih koaksialnih kablov tipa 50-141 s politetrafluoroetilenskim (PTFE) dielektrikom (IEC 61196-8-4) in konektorji, kot sta tip SMA (IEC 61169-15) in tip N (IEC 61169-16). Ta del standarda podaja podrobne zahteve za podskupine in stopnje zahtevnosti, ki jih je treba upoštevati.
Ti kabelski sklopi so namenjeni predvsem za uporabo v mikrovalovni in brezžični opremi oziroma drugi opremi ali enotah za prenos signalov. Frekvenčno območje delovanja je do 18000 MHz.
Kvalifikacija bo izvedena v skladu s standardom IEC 60966-3. Ko ena različica pridobi odobritev kvalifikacije, lahko odobritev kvalifikacije pridobi druga različica z enakim kablom in tipom priključka, in sicer z izvedbo preskusov, katerih rezultati so lahko odvisni od različic.
V okviru potrjevanja zmogljivosti bo kvalifikacija izvedena za povezane komponente s kvalificirano zmogljivostjo (CQC), kot je opredeljeno v standardu IEC 60966-3 in opisano v priročniku za zmogljivost (CM). Razen če je v priročniku za zmogljivost navedeno drugače, bodo za dobavljene izdelke izvedeni samo posamezni preskusi iz skupin Ba in Eb, vsi drugi preskusi pa bodo izvedeni za komponente s kvalificirano zmogljivostjo, kot je opredeljeno v standardu IEC 60966-3 in opisano v priročniku za zmogljivost (CM).
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 60966-3-3:2023
01-junij-2023
Sestavi radiofrekvenčnih in koaksialnih kablov - 3-3. del: Podrobna specifikacija za
delno upogibljive kabelske sklope (prevezava), frekvenčno območje do 18 GHz,
delno upogibljiv koaksialni kabel tipa 50-141 (IEC 60966-3-3:2023)
Radio frequency and coaxial cable assemblies - Part 3-3: Detail specification for semi-
flexible cable assemblies (Jumper) - Frequency range up to 18 GHz, Type 50-141 semi-
flexible coaxial cable (IEC 60966-3-3:2023)
Konfektionierte Koaxial- und Hochfrequenzkabel – Teil 3-3: Einzelspezifikation für
semiflexible Kabelkonfektionen (Jumper), Frequenzbereich bis 18 GHz, Typ 50-141
semiflexibles Koaxialkabel (IEC 60966-3-3:2023)
Cordons coaxiaux et cordons pour fréquences radioélectriques - Partie 3-3 :
Spécification particulière relative aux cordons semi-flexibles (câble de pontage), bande
de fréquences jusqu’à 18 GHz, câble coaxial semi-flexible de type 50-141 (IEC 60966-3-
3:2023)
Ta slovenski standard je istoveten z: EN IEC 60966-3-3:2023
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN IEC 60966-3-3:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 60966-3-3:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 60966-3-3:2023
EUROPEAN STANDARD EN IEC 60966-3-3
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2023
ICS 33.120.10; 33.120.01
English Version
Radio frequency and coaxial cable assemblies - Part 3-3: Detail
specification for semi-flexible cable assemblies (jumper) -
Frequency range up to 18 GHz, Type 50-141 semi-flexible
coaxial cable
(IEC 60966-3-3:2023)
Cordons coaxiaux et cordons pour fréquences Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 3-3:
radioélectriques - Partie 3-3: Spécification particulière Einzelspezifikation für semiflexible Kabelkonfektionen
relative aux cordons semi-flexibles (câble de liaison), plage (Jumper), Frequenzbereich bis 18 GHz, Typ 50-141
de fréquences jusqu'à 18 GHz, câble coaxial semi-flexible semiflexibles Koaxialkabel
de type 50-141 (IEC 60966-3-3:2023)
(IEC 60966-3-3:2023)
This European Standard was approved by CENELEC on 2023-04-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60966-3-3:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60966-3-3:2023
EN IEC 60966-3-3:2023 (E)
European foreword
The text of document 46/927/FDIS, future edition 1 of IEC 60966-3-3, prepared by IEC/TC 46 "Cables,
wires, waveguides, RF connectors, RF and microwave passive components and accessories" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 60966-3-3:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-01-11
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-04-11
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60966-3-3:2023 w
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.