EN 62150-5:2017
(Main)Fibre optic active components and devices - Test and measurement procedures - Part 5: Wavelength channel tuning time of tuneable transmitters
Fibre optic active components and devices - Test and measurement procedures - Part 5: Wavelength channel tuning time of tuneable transmitters
IEC 62150-5:2017 specifies test and measurement procedures for the wavelength channel tuning time of tuneable transmitters. It applies to laser transmitters, and to the transmitter portion of transceivers. This procedure examines whether the device or module satisfies the appropriate performance specification. The method described in this document uses optical filters to transfer the transition of the output wavelength to the transition of the optical power. This is because the transient response of the output wavelength before stabilization at steady-state of the target wavelength channel is too fast to measure using a wavelength meter or an optical spectrum analyser. Reference optical filter sets are described in Annex A. Keywords: test and measurement procedures of the wavelength channel tuning time
Aktive Lichtwellenleiter-Bauteile und -Bauelemente - Prüf- und Messverfahren - Teil 5: Wellenlängenkanal-Abstimmzeit von abstimmbaren Sendern
Composants et dispositifs actifs à fibres optiques - Procédures d'essais et de mesures - Partie 5: Durée d’accordement des émetteurs accordables en longueur d’onde
IEC 62150-5:2017 spécifie les procédures d’essais et de mesures de la durée d’accordement des émetteurs accordables en longueur d’onde sur un canal de longueur d’onde. Dans un réseau à plusieurs longueurs d’onde tel que décrit dans la série UIT-T G.989, l’émetteur accordable est commandé pour modifier sa longueur d’onde de sortie pendant son fonctionnement. Pour fournir différents cas d’utilisation, les émetteurs accordables sont répartis en plusieurs classes selon leurs durées d’accordement en longueur d’onde. Les procédures d’essais et de mesures de la durée d’accordement en longueur d’onde sont définies pour garantir une interopérabilité. Mots clés: procédures d’essais et de mesures de la durée d’accordement en longueur d’onde
Aktivne optične komponente in naprave - Preskusni in merilni postopki - 5. del: Čas za nastavljanje na valovno dolžino kanala z nastavljivimi oddajniki (IEC 62150-5:2017)
Ta del standarda IEC 62150 določa preskusne in merilne postopke za čas za nastavljanje na valovno dolžino kanala z nastavljivimi oddajniki. Uporablja se za laserske oddajnike in oddajni del oddajno-sprejemnih naprav. Ta postopek preuči, ali je naprava ali modul skladna z ustrezno tehnično specifikacijo.
Metoda, opisana v tem dokumentu, uporablja optične filtre za prenos prehoda izhodne valovne dolžine na prehod optične moči, ker je prehodni odziv izhodne valovne dolžine pred stabilizacijo v uravnovešenem stanju ciljnega valovnodolžinskega kanala prehiter, da bi se ga lahko merilo z uporabo merilnika valovne dolžine ali optičnega analizatorja spektra. Referenčni kompleti optičnih filtrov so opisani v dodatku A.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fibre optic active components and devices - Test and measurement procedures - Part 5: Wavelength channel tuning time of tuneable transmitters (IEC 62150-5:2017)33.180.01VSORãQRFibre optic systems in generalICS:Ta slovenski standard je istoveten z:EN 62150-5:2017SIST EN 62150-5:2017en01-oktober-2017SIST EN 62150-5:2017SLOVENSKI
STANDARD
SIST EN 62150-5:2017
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 62150-5
August 2017 ICS 33.180.20
English Version
Fibre optic active components and devices - Test and measurement procedures - Part 5: Wavelength channel tuning time of tuneable transmitters (IEC 62150-5:2017)
Composants et dispositifs actifs à fibres optiques - Procédures d'essais et de mesures -
Partie 5: Durée d'accordement des émetteurs accordables en longueur d'onde (IEC 62150-5:2017)
Aktive Lichtwellenleiter-Bauteile und -Bauelemente -
Prüf- und Messverfahren - Teil 5: Wellenlängenkanal-Abstimmzeit von abstimmbaren Sendern (IEC 62150-5:2017) This European Standard was approved by CENELEC on 2017-06-15. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62150-5:2017 E SIST EN 62150-5:2017
EN 62150-5:2017 2 European foreword The text of document 86C/1440/FDIS, future edition 1 of IEC 62150-5, prepared by SC 86C "Fibre optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62150-5:2017.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-03-15 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-06-15
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 62150-5:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60191 Series NOTE Harmonized as EN 60191 Series. IEC 60747-5 Series NOTE Harmonized as EN 60747-5 Series. IEC 60825 Series NOTE Harmonized as EN 60825 Series. IEC 62149-1 NOTE Harmonized as EN 62149-1. IEC 62150-1 NOTE Harmonized as EN 62150-1. IEC 62522 NOTE Harmonized as EN 62522. SIST EN 62150-5:2017
IEC 62150-5 Edition 1.0 2017-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic active components and devices – Test and measurement
procedures –
Part 5: Wavelength channel tuning time of tuneable transmitters
Composants et dispositifs actifs à fibres optiques – Procédures d'essais et
de mesures –
Partie 5: Durée d’accordement des émetteurs accordables en longueur d’onde
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE
ICS 33.180.20
ISBN 978-2-8322-4277-3
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale ®
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé. SIST EN 62150-5:2017
– 2 – IEC 62150-5:2017 © IEC 2017 CONTENTS FOREWORD .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.