EN IEC 62343-3-3:2020
(Main)Dynamic modules - Part 3-3: Performance specification templates - Wavelength selective switches
Dynamic modules - Part 3-3: Performance specification templates - Wavelength selective switches
IEC 62343-3-3:2020 is available as IEC 62343-3-3:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62343-3-3:2020 provides a performance specification template for wavelength selective switches. The object is to provide a framework for the preparation of detail specifications on the performance of wavelength selective switches. Additional specification parameters are often included for detailed product specifications or performance specifications if necessary. However, specification parameters specified in this document are not removed from the detail product specifications or performance specifications. The technical information regarding wavelength selective switches and their applications in DWDM systems with single-mode fibres are described in IEC TR 62343-6-4. This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - modification of the normative references; - modification of the terms and definitions.
Dynamische Module - Teil 3-3: Vorlagen für Leistungsspezifikationen - Wellenlängenselektive Schalter
Modules dynamiques - Partie 3-3: Modèles de spécification de performance - Commutateurs sélectifs en longueur d'onde
IEC 62343-3-3:2020 est disponible sous forme de IEC 62343-3-3:2020 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.IEC 62343-3-3:2020 présente un modèle de spécification de performance pour les commutateurs sélectifs en longueur d’onde. Il est destiné à fournir un cadre pour l'établissement de spécifications particulières sur les performances des commutateurs sélectifs en longueur d’onde. Des paramètres de spécification supplémentaires sont souvent inclus pour les spécifications détaillées de produit ou les spécifications de performances, si nécessaire. Toutefois, les paramètres de spécification stipulés dans le présent document ne sont pas retirés des spécifications particulières de produit ou de performances. Les informations techniques concernant les commutateurs sélectifs en longueur d'onde et leurs applications dans des systèmes DWDM avec fibres unimodales sont décrites dans l'IEC TR 62343-6-4. Cette deuxième édition annule et remplace la première édition publiée en 2014. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - modifications des références normatives; - modification des termes et définitions.
Dinamični moduli - 3-3. del: Predloge za tehnične specifikacije - Valovnodolžinska selektivna stikala (IEC 62343-3-3:2020)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2020
Nadomešča:
SIST EN 62343-3-3:2014
Dinamični moduli - 3-3. del: Predloge za tehnične specifikacije - Valovnodolžinska
selektivna stikala (IEC 62343-3-3:2020)
Dynamic modules - Part 3-3: Performance specification templates - Wavelength
selective switches (IEC 62343-3-3:2020)
Dynamische Module - Teil 3-3: Vorlagen für Leistungsspezifikationen - Wellenlängen-
Wählschalter (IEC 62343-3-3:2020)
Modules dynamiques - Partie 3-3: Modèles de spécification de performance -
Commutateurs sélectifs en longueur d'onde (IEC 62343-3-3:2020)
Ta slovenski standard je istoveten z: EN IEC 62343-3-3:2020
ICS:
31.220.20 Stikala Switches
33.180.30 Optični ojačevalniki Optic amplifiers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62343-3-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2020
ICS 33.180.20 Supersedes EN 62343-3-3:2014 and all of its
amendments and corrigenda (if any)
English Version
Dynamic modules - Part 3-3: Performance specification
templates - Wavelength selective switches
(IEC 62343-3-3:2020)
Modules dynamiques - Partie 3-3: Modèles de spécification Dynamische Module - Teil 3-3: Vorlagen für
de performance - Commutateurs sélectifs en longueur Leistungsspezifikationen - Wellenlängenselektive Schalter
d'onde (IEC 62343-3-3:2020)
(IEC 62343-3-3:2020)
This European Standard was approved by CENELEC on 2020-05-14. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62343-3-3:2020 E
European foreword
The text of document 86C/1648/FDIS, future edition 2 of IEC 62343-3-3, prepared by SC 86C "Fibre
optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 62343-3-3:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-02-14
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-05-14
document have to be withdrawn
This document supersedes EN 62343-3-3:2014 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62343-3-3:2020 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60793-2-50 NOTE Harmonized as EN IEC 60793-2-50
IEC 60869-1 NOTE Harmonized as EN IEC 60869-1
IEC 60876-1 NOTE Harmonized as EN 60876-1
IEC 61300 (series) NOTE Harmonized as EN 61300 (series)
IEC 61300-3-4 NOTE Harmonized as EN 61300-3-4
IEC 61300-3-20 NOTE Harmonized as EN 61300-3-20
IEC 61753-081-2 NOTE Harmonized as EN 61753-081-2
IEC 61753-083-2:2007 NOTE Harmonized as EN 61753-083-2:2008 (not modified)
IEC 61753-084-2:2007 NOTE Harmonized as EN 61753-084-2:2008 (not modified)
IEC 61753-1 NOTE Harmonized as EN IEC 61753-1
IEC 61754 (series) NOTE Harmonized as EN 61754 (series)
IEC 61978-1 NOTE Harmonized as EN 61978-1
IEC 62343-4-1 NOTE Harmonized as EN 62343-4-1
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61290-7-1 - Optical amplifiers - Test methods - Part 7-1: EN 61290-7-1 -
Out-of-band insertion losses - Filtered optical
power meter method
IEC 61300-2-14 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures - Part 2-14: Tests -
High optical power
IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 -
passive components - Basic test and
measurement procedures - Part 3-2:
Examination and measurements -
Polarization dependent loss in a single-mode
fibre optic device
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures - Part 3-6:
Examinations and measurements - Return
loss
IEC 61300-3-14 - Fibre optic interconnecting devices and EN 61300-3-14 -
passive components - Basic test and
measurement procedures - Part 3-14:
Examinations and measurements - Error and
repeatability of the attenuation settings of a
variable optical attenuator
IEC 61300-3-21 - Fibre optic interconnecting devices and EN IEC 61300-3-21 -
passive components - Basic test and
measurement procedures - Part 3-21:
Examinations and measurements - Switching
time
IEC 61300-3-29 - Fibre optic interconnecting devices and EN 61300-3-29 -
passive components - Basic test and
measurement procedures - Part 3-29:
Examinations and measurements - Spectral
transfer characteristics of DWDM devices
IEC 61300-3-32 - Fibre optic interconnecting devices and EN 61300-3-32 -
passive components - Basic test and
measurement procedures - Part 3-32:
Examinations and measurements -
Polarization mode dispersion measurement
for passive optical components
IEC 61300-3-38 - Fibre optic interconnecting devices and EN 61300-3-38 -
passive components - Basic test and
measurement procedures - Part 3-38:
Examinations and measurements - Group
delay, chromatic dispersion and phase ripple
IEC 61753-021-2 - Fibre optic interconnecting devices and EN 61753-021-2 -
passive components performance standard -
Part 021-2: Grade C/3 single-mode fibre optic
connectors for category C - Controlled
environment
IEC 62074-1 - Fibre optic interconnecting devices and EN 62074-1 -
passive components - Fibre optic WDM
devices - Part 1: Generic specification
IEC 62343 - Dynamic modules - General and guidance EN 62343 -
IEC 62343-1 - Dynamic modules - Part 1: Performance EN IEC 62343-1 -
standards - General conditions
IEC 62343-5-2 - Dynamic modules - Part 5-2: Test methods - EN IEC 62343-5-2 -
1 x N fixed-grid WSS - Dynamic crosstalk
measurement
ITU-T G.694-1 - Spectral grids for WDM applications: DWDM - -
frequency grid
IEC 62343-3-3 ®
Edition 2.0 2020-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Dynamic modules –
Part 3-3: Performance specification templates – Wavelength selective switches
Modules dynamiques –
Partie 3-3: Modèles de spécification de performance – Commutateurs sélectifs
en longueur d'onde
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-8107-9
– 2 – IEC 62343-3-3:2020 © IEC 2020
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Test report . 7
5 Performance requirements. 7
5.1 Dimensions . 7
5.2 Sample size . 7
5.3 Test details and requirements . 7
Bibliography . 12
Table 1 – Tests and requirements . 8
IEC 62343-3-3:2020 © IEC 2020 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DYNAMIC MODULES –
Part 3-3: Performance specification templates –
Wavelength selective switches
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such paten
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.