EN 62132-5:2006
(Main)Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Part 5: Workbench Faraday cage method
Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Part 5: Workbench Faraday cage method
This measurement procedure describes a measurement method to quantify the RF immunity of integrated circuits (ICs) mounted on a standardized test board or on their final application board (PCB), to electromagnetic conductive disturbances.
Integrierte Schaltungen - Messung der elektromagnetischen Störfestigkeit im Frequenzbereich von 150 kHz bis 1 GHz - Teil 5: Verfahren mit Faradayschem Arbeitskäfig
Circuits intégrés - Mesure de l'immunité électromagnétique, 150 kHz à 1 GHz - Partie 5: Méthode de la cage de Faraday sur banc de travail
Cette procédure de mesure décrit une méthode de mesure pour quantifier l'immunité RF des circuits intégrés (CI) montés sur une carte d'essai normalisée ou dans leur application finale de carte d'essai (PCB), aux perturbations électromagnétiques conductrices.
Integrirana vezja – Meritve elektromagnetne odpornosti od 150 kHz do 1 GHz – 5. del: Metoda s Faradayevo kletko (IEC 62132-5:2005)
General Information
Standards Content (Sample)
SLOVENSKI SIST EN 62132-5:2006
STANDARD
julij 2006
Integrirana vezja – Meritve elektromagnetne odpornosti od 150 kHz do 1 GHz –
5. del: Metoda s Faradayevo kletko (IEC 62132-5:2005)
Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz -
Part 5: Workbench Faraday cage method (IEC 62132-5:2005)
ICS 31.200; 33.100.20 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD
EN 62132-5
NORME EUROPÉENNE
January 2006
EUROPÄISCHE NORM
ICS 31.200
English version
Integrated circuits –
Measurement of electromagnetic immunity, 150 kHz to 1 GHz
Part 5: Workbench Faraday cage method
(IEC 62132-5:2005)
Circuits intégrés – Integrierte Schaltungen –
Mesure de l'immunité électromagnétique, Messung der elektromagnetischen
150 kHz à 1 GHz Störfestigkeit im Frequenzbereich
Partie 5: Méthode de la cage de Faraday von 150 kHz bis 1 GHz
sur banc de travail Teil 5: Verfahren mit Faradayschem
(CEI 62132-5:2005) Arbeitskäfig
(IEC 62132-5:2005)
This European Standard was approved by CENELEC on 2005-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62132-5:2006 E
Foreword
The text of document 47A/721/FDIS, future edition 1 of IEC 62132-5, prepared by SC 47A, Integrated
circuits, of IEC TC 47, Semiconductor devices, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 62132-5 on 2005-12-01.
This standard is to be read in conjunction with EN 62132-1.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-12-01
This European Standard makes reference to International Standards. Where the International Standard
referred to has been endorsed as a European Standard or a home-grown European Standard exists, this
European Standard shall be applied instead. Pertinent information can be found on the CENELEC web
site.
__________
Endorsement notice
The text of the International Standard IEC 62132-5:2005 was approved by CENELEC as a European
Standard without any modification.
__________
NORME CEI
INTERNATIONALE
IEC
62132-5
INTERNATIONAL
Première édition
STANDARD
First edition
2005-10
Circuits intégrés –
Mesure de l'immunité électromagnétique,
150 kHz à 1 GHz –
Partie 5:
Méthode de la cage de Faraday
sur banc de travail
Integrated circuits –
Measurement of electromagnetic immunity,
150 kHz to 1 GHz –
Part 5:
Workbench Faraday cage method
IEC 2005 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
S
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue
62132-5 IEC:2005 – 3 –
CONTENTS
FOREWORD.7
1 Scope.11
2 Normative references.11
3 Terms and definitions .11
4 General .13
4.1 Applicability .13
4.2 Measurement philosophy .13
4.3 Basic test set-up.15
4.4 Workbench concept.15
5 Test conditions .15
6 Test equipment.17
7 Test set-up .17
7.1 General .17
7.2 Shielding and ambient fields .19
7.3 Workbench set-up .19
7.4 Connections to the test board .19
7.5 Common-mode points.21
7.6 Workbench Faraday cage – Practical implementation.23
7.7 Test board.25
8 Test procedure .25
8.1 General .25
8.2 Requirements for the workbench Faraday cage test .27
9 Test report.27
Annex A (normative) Detailed specification of workbench Faraday cage (WBFC) .29
Annex B (informative) Theory of workbench Faraday cage method .37
Annex C (informative) Common-mode impedances.39
Annex D (informative) RF immunity levels .41
Bibliography .45
62132-5 IEC:2005 – 5 –
Figure 1 – Conducted immunity measurement method − General set-up .15
Figure 2 – Set-up for RF immunity testing using the workbench Faraday cage .19
Figure 3 – Influence of selected number of common-mode points .21
Figure 4 – Position of common-mode points .23
Figure A.1 – Mechanical drawing of workbench Faraday cage.31
Figure A.2 – Mechanical drawing of workbench – Cover .31
Figure A.3 – Low-pass feed-through filter .33
Figure A.4 – Example of a construction of the 150 Ω network .33
Figure A.5 – Example of the measured impedance of the 150 Ω network .33
Figure A.6 – Metallic calibration jig for common mode impedance measurements .35
Figure B.1 – Workbench Faraday cage lumped elements model .37
Table C.1 – Statistical values of radiation resistances measured on long cables .39
Table C.2 – CDN common-mode impedance parameters .39
Table D.1 – Test levels for immunity.41
62132-5 IEC:2005 – 7 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
INTEGRATED CIRCUITS –
MEASUREMENT OF ELECTROMAGNETIC IMMUNITY,
150 kHz TO 1 GHz –
Part 5: Workbench Faraday cage method
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62132-5 has been prepared by subcommittee 47A: Integrated
circuits, of IEC technical committee 47: Semiconductor devices.
The text of this standard is based on the following documents:
FDIS Report on voting
47A/721/FDIS 47A/728/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
62132-5 IEC:2005 – 9 –
This standard is to be read in conjunction with IEC 62132-1 .
IEC 62132 consists of the following parts, under the general title Integrated circuits –
Measurement of electromagnetic immunity, 150 kHz to 1 GHz:
Part 1: General conditions and definitions
Part 2: Measurement of Radiated Immunity – TEM-Cell and Wideband TEM-Cell Method
Part 3: Bulk Current Injection (BCI), 10 kHz to 1GHz
Part 4: Direct RF power injection method
Part 5: Workbench Faraday cage method
The committee has decided that the contents of this publication will remain unchanged until the
mai
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.