EN 61307:2006
(Main)Industrial microwave heating installations - Test methods for the determination of power output
Industrial microwave heating installations - Test methods for the determination of power output
Specifies test methods for industrial microwave heating installations. Is applicable to industrial microwave heating equipment and installations used for the purpose of thermal application to loads containing water or moisture.
Industrielle Mikrowellen-Erwärmungsanlagen - Messverfahren für die Bestimmung der Ausgangsleistung
Installations industrielles de chauffage à hyperfréquence - Méthodes d'essais pour la détermination de la puissance de sortie
Spécifie les méthodes d'essais pour les installations industrielles de chauffage à hyperfréquence. Est applicable aux installations et équipements industriels de chauffage à hyperfréquence utilisés dans le cadre d'applications thermiques pour charges contenant de l'eau ou de l'humidité.",PE
Industrijske inštalacije za mikrovalovno segrevanje – Preskusne metode za ugotavljanje izhodne moči (IEC 61307:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61307:2006
01-september-2006
,QGXVWULMVNHLQãWDODFLMH]DPLNURYDORYQRVHJUHYDQMH±3UHVNXVQHPHWRGH]D
XJRWDYOMDQMHL]KRGQHPRþL ,(&
Industrial microwave heating installations - Test methods for the determination of power
output
Industrielle Mikrowellen-Erwärmungsanlagen - Messverfahren für die Bestimmung der
Ausgangsleistung
Installations industrielles de chauffage à hyperfréquence - Méthodes d'essais pour la
détermination de la puissance de sortie
Ta slovenski standard je istoveten z: EN 61307:2006
ICS:
25.180.10
SIST EN 61307:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 61307
NORME EUROPÉENNE
May 2006
EUROPÄISCHE NORM
ICS 25.180.10 Supersedes EN 61307:1996
English version
Industrial microwave heating installations -
Test methods for the determination of power output
(IEC 61307:2006)
Installations industrielles de chauffage Industrielle Mikrowellen-
à hyperfréquence - Erwärmungsanlagen -
Méthodes d'essais pour la détermination Meßverfahren für die Bestimmung der
de la puissance de sortie Ausgangsleistung
(CEI 61307:2006) (IEC 61307:2006)
This European Standard was approved by CENELEC on 2006-04-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61307:2006 E
---------------------- Page: 2 ----------------------
EN 61307:2006 - 2 -
Foreword
The text of document 27/509/FDIS, future edition 2 of IEC 61307, prepared by IEC TC 27, Industrial
electroheating equipment, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 61307 on 2006-04-01.
This European Standard supersedes EN 61307:1996.
The most significant change is that the microwave power output of type B equipment has to be measured
by an open-dish load (6.4).
This standard is to be used in conjunction with EN 60519-1 and EN 60519-6.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-04-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61307:2006 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 61307:2006
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60050-726 1982 International electrotechnical vocabulary - - -
Chapter 726: Transmission lines and
waveguides
IEC 60050-841 2004 International electrotechnical vocabulary - -
Part 841: Industrial electroheat
1) 2)
IEC 60519-1 – Safety in electroheat installations EN 60519-1 2003
Part 1: General requirements
1) 2)
IEC 60519-6 – Safety in electroheat installations EN 60519-6 2002
Part 6: Specifications for safety in industrial
microwave heating equipment
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.