EURUSD
Your shopping cart is empty.
CLC

EN IEC 62841-2-12:2024/AC:2025-11

(Corrigendum)

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-12: Particular requirements for hand-held concrete vibrators

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-12: Particular requirements for hand-held concrete vibrators

Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 2-12: Besondere Anforderungen für handgeführte Innenrüttler

Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 2-12 : Exigences particulières pour les vibrateurs à béton portatifs.

Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 2-12. del: Posebne zahteve za ročne vibratorje betona - Popravek AC

General Information

Status
Published
Publication Date
13-Nov-2025
ICS
25.140.20 - Electric tools
Technical Committee
CLC/TC 116 - Safety of hand-held motor-operated electric tools
Current Stage
6060 - Document made available - Publishing
Start Date
14-Nov-2025
Completion Date
14-Nov-2025
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Mandate
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
SIST EN IEC 62841-2-12:2024/AC:2026 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-12: Particular requirements for hand-held concrete vibrators

Relations

Corrects
EN IEC 62841-2-12:2024/A11:2024 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-12: Particular requirements for hand-held concrete vibrators
Effective Date
23-Sep-2025
Corrects
EN IEC 62841-2-12:2024 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-12: Particular requirements for hand-held concrete vibrators
Effective Date
23-Sep-2025
EN IEC 62841-2-12:2024/AC:2026EN IEC 62841-2-12:2024/AC:2026
PreviousNext
Corrigendum
EN IEC 62841-2-12:2024/AC:2026
English language
1 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2026
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 2-
12. del: Posebne zahteve za ročne vibratorje betona - Popravek AC
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 2-12: Particular requirements for hand-held concrete vibrators
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und
Rasen- und Gartenmaschinen - Sicherheit - Teil 2-12: Besondere Anforderungen für
handgeführte Innenrüttler
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses -
Sécurité - Partie 2-12 : Exigences particulières pour les vibrateurs à béton portatifs.
Ta slovenski standard je istoveten z: EN IEC 62841-2-12:2024/AC:2025-11
ICS:
25.140.20 Električna orodja Electric tools
25.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62841-2-16:2025(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-16: Particular requirements for hand-held fastener driving tools
SIST EN IEC 62841-2-16:2026

IEC 62841-2-16:2024 is to be used in conjunction with IEC 62841-1:2014. This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held fastener driving tools. Where a particular subclause of IEC 62841-1 is not mentioned in this document, that subclause applies as far as reasonable. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1 is to be adapted accordingly. IEC 62841-1:2014, Clause 1 is applicable, except as follows: Addition: This document applies to hand-held fastener driving tools - intended for driving fasteners into or through concrete, fabric, fiberboard, metal, plastic, wood, wood products, cartons, and other materials; and - whose energy to drive the fastener is derived directly or indirectly from an electric motor or magnetic drive. This document does not apply to pneumatically driven tools where the compressed gas comes from an external source, such as a compressor or a tank. This document does not apply to tools powered by combustible gases, even if electrically ignited. NOTE 101 Tools powered by compressed air or combustible gases are covered by ISO 11148-13:2017.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62841-2-7:2024/AC:2025-07(Corrigendum)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-7: Particular requirements for hand-held spray guns
SIST EN IEC 62841-2-7:2024/AC:2025
  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62841-1:2015/A1:2025(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements
SIST EN 62841-1:2015/A1:2025
  • Amendment
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62841-4-8:2025(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-8: Particular requirements for shredders/chippers
SIST EN IEC 62841-4-8:2025

IEC 62841-4-8:2025 specifies safety requirements and their verification for the design and construction of hand fed, shredders/chippers with an integral electric motor, with or without vacuum assisted collection, which are designed to reduce organic material to smaller pieces and are used in a stationary position by an operator standing on the ground. This document applies to shredders/chippers with feed intake openings or feed safety openings that in total will fit into a square of 250 mm x 250 mm. NOTE 101 The requirements for the measurement of the square of 250 mm x 250 mm are specified in 19.101.1. In this document, shredders/chippers are referred to collectively as machine(s). This document does not cover requirements for - machines powered by combustion engines; or - machines driven by an external power source; or - machines with powered discharge intended to broadcast material or load vehicles; or - machines with mechanically powered feed intake or attachments; or - wood chippers for forestry, agriculture, horticulture and landscaping. This document is to be used in conjunction with IEC 62841‑1:2014. This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for shredders/chippers.

  • Standard
    98 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62841-4-8:2025/A11:2025(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-8: Particular requirements for shredders/chippers
SIST EN IEC 62841-4-8:2025/A11:2025

2022-08-22: This prAA covers common mods to EN IEC 62841-4-8 (PR=75587)
D164/C043: DOW = DOR + 48 months

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62841-2-6:2020/AC:2024-11(Corrigendum)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers
SIST EN IEC 62841-2-6:2020/AC:2024
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62841-2-7:2024/A11:2024(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-7: Particular requirements for hand-held spray guns
SIST EN IEC 62841-2-7:2024/A11:2024

2021-12-20: This prAA includes common mods to EN IEC 62841-2-7 (PR=75432)
DOW=DOR+48 months is applied to all parts in EN IEC 62841 series

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62841-2-7:2024(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-7: Particular requirements for hand-held spray guns
SIST EN IEC 62841-2-7:2024

IEC 62841-2-7:2024 deals with the safety of electric motor-operated hand-held spray guns for non-flammable materials. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3. This Part 2-7 is to be used in conjunction with the first edition of IEC 62841-1:2014. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62841-2-12:2024(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-12: Particular requirements for hand-held concrete vibrators
SIST EN IEC 62841-2-12:2024

IEC 62841-2-12:2024 is to be used in conjunction with IEC 62841-1:2014. This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held concrete vibrators. IEC 62841-1:2014, Clause 1 is applicable, except as follows. Addition: This document applies to hand-held concrete vibrators.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62841-2-12:2024/A11:2024(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-12: Particular requirements for hand-held concrete vibrators
SIST EN IEC 62841-2-12:2024/A11:2024

2021-12-20: This prAA includes common mods to EN IEC 62841-2-12 (PR=75428)
DOW=DOR+48 months is applied to all parts in EN IEC 62841 series

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day