prEN IEC 60384-14-2:2024
(Main)Fixed capacitors for use in electronic equipment - Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Safety tests only
Fixed capacitors for use in electronic equipment - Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Safety tests only
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 14-2: Vordruck für Bauartspezifikation – Kondensatoren zur Unterdrückung elektromagnetischer Störungen, geeignet für Netzbetrieb – Nur Sicherheitsprüfungen
Condensateurs fixes utilisés dans les équipements électroniques - Partie 14-2: Spécification particulière cadre - Condensateurs fixes d'antiparasitage et raccordement à l'alimentation - Essais de sécurité uniquement
Nespremenljivi kondenzatorji za uporabo v elektronski opremi - 14-2. del: Okvirna podrobna specifikacija - Nespremenljivi kondenzatorji za dušenje elektromagnetnega motenja in priključevanje na omrežno napajanje - Samo (le) varnostno preskušanje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2025
Nespremenljivi kondenzatorji za uporabo v elektronski opremi - 14-2. del: Okvirna
podrobna specifikacija - Nespremenljivi kondenzatorji za dušenje
elektromagnetnega motenja in priključevanje na omrežno napajanje - Samo (le)
varnostno preskušanje
Fixed capacitors for use in electronic equipment - Part 14-2: Blank detail specification -
Fixed capacitors for electromagnetic interference suppression and connection to the
supply mains - Safety tests only
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 14-2: Vordruck für
Bauartspezifikation – Kondensatoren zur Unterdrückung elektromagnetischer Störungen,
geeignet für Netzbetrieb – Nur Sicherheitsprüfungen
Condensateurs fixes utilisés dans les équipements électroniques - Partie 14-2:
Spécification particulière cadre - Condensateurs fixes d'antiparasitage et raccordement à
l'alimentation - Essais de sécurité uniquement
Ta slovenski standard je istoveten z: prEN IEC 60384-14-2:2024
ICS:
31.060.10 Fiksni kondenzatorji Fixed capacitors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
40/3192/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60384-14-2 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-12-27 2025-03-21
SUPERSEDES DOCUMENTS:
40/3148/CD, 40/3179/CC
IEC TC 40 : CAPACITORS AND RESISTORS FOR ELECTRONIC EQUIPMENT
SECRETARIAT: SECRETARY:
Netherlands Mr Ronald Drenthen
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):
ASPECTS CONCERNED:
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the
final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Fixed capacitors for use in electronic equipment - Part 14-2: Blank detail specification - Fixed
capacitors for electromagnetic interference suppression and connection to the supply mains -
Safety tests only
PROPOSED STABILITY DATE: 2033
NOTE FROM TC/SC OFFICERS:
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing
National Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part
of it, for any other purpose without permission in writing from IEC.
IEC CDV 60384-14-2 © IEC 2024 – 2 – 40/3192/CDV
1 CONTENTS
3 FOREWORD . 3
4 INTRODUCTION . 5
5 1 Scope . 7
6 2 Normative references . 7
7 3 Terms and definitions . 7
8 4 General information . 8
9 4.1 Recommended method(s) of mounting (to be inserted) . 8
10 4.2 Dimensions . 8
11 4.3 Ratings and characteristics . 8
12 4.4 Marking . 8
13 4.5 Ordering information . 8
14 4.6 Additional information (not required for inspection purposes) . 8
15 4.7 Requirements in the case that the components are qualified according to
16 Annex H or Annex I of IEC 60384-14:2023 . 9
17 4.7.1 Additional requirements for use in DC applications . 9
18 4.7.2 Additional requirements for use under high humidity operating
19 conditions . 9
20 4.8 Additional or increased severities or requirements to those specified in the
21 generic and/or sectional specification . 9
22 5 Inspection requirements . 9
23 5.1 Procedures . 9
24 5.2 Test schedules . 9
25 5.2.1 Initial approval . 9
26 5.2.2 Conformance testing (lot-by-lot) . 9
27 5.2.3 Requalification . 9
28 Annex A (normative) Declaration of design . 13
29 Annex X (informative) Cross-references for references to the previous edition of this
30 document . 14
31 Bibliography . 15
33 Table 1 – Other characteristics . 9
34 Table 2 – Initial approval test schedule for safety tests only . 10
35 Table 3 – Conformance test schedule: lot-by-lot . 12
36 Table X.1 – Reference to IEC 60384-14-1 for clause/subclause or annex . 14
37 Table X.2 – Reference to IEC 60384-14-1 for table . 14
IEC CDV 60384-14-2 © IEC 2024 – 3 – 40/3192/CDV
41 INTERNATIONAL ELECTROTECHNICAL COMMISSION
42 ____________
44 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
46 Part 14-2: Blank detail specification – Fixed capacitors for
47 electromagnetic interference suppression and connection to
48 the supply mains – Safety tests only
50 FOREWORD
51 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
52 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
53 international co-operation on all questions concerning standardization in the electrical and electronic fields. To
54 this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
55 Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
56 Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
57 in the subject dealt with may participate in this preparatory work. International, governmental and non -
58 governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
59 with the International Organization for Standardization (ISO) in accordance with conditions determined by
60 agreement between the two organizations.
61 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
62 consensus of opinion on the relevant subjects since each technical committee has representation from all
63 interested IEC National Committees.
64 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
65 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
66 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
67 misinterpretation by any end user.
68 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
69 transparently to the maximum extent possible in their national and regional publications. Any divergence
70 between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
71 the latter.
72 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
73 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
74 services carried out by independent certification bodies.
75 6) All users should ensure that they have the latest edition of this publication.
76 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
77 members of its technical committees and IEC National Committees for any personal injury, property damage or
78 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
79 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
80 Publications.
81 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
82 indispensable for the correct application of this publication.
83 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
84 patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
85 International Standard IEC 60384-14-2 has been prepared by IEC technical committee 40:
86 Capacitors and resistors for electronic equipment.
87 This third edition cancels and replaces the first edition published in 2016 and constitutes a
88 technical revision.
89 This edition includes the following significant technical changes with respect to the previous
90 edition:
91 a) The tables for dimensions have been replaced with a guidance text in the document.
92 b) The possibility to give the requirements for the service in DC applications and in high
93 humidity conditions have been added.
IEC CDV 60384-14-2 © IEC 2024 – 4 – 40/3192/CDV
96 The text of this standard is based on the following documents:
FDIS Report on voting
40/XX/FDIS 0/XX/RVD
98 Full information on the voting for the approval of this standard can be found in the report on
99 voting indicated in the above table.
100 A list of all parts in the IEC 60384 series, published under the general title Fixed capacitors
101 for use in electronic equipment, can be found on the IEC website.
102 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
103 This International Standard is to be used in conjunction with. IEC 60384-1:XXXX.
104 The committee has decided that the contents of this publication will remain unchanged until
105 the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data
106 related to the specific publication. At this date, the publication will be
107 • reconfirmed,
108 • withdrawn,
109 • replaced by a revised edition, or
110 • amended.
112 The National Committees are requested to note that for this publication the stability date is .
113 THIS TEXT IS INCLUDED FOR THE INFORMATION OF THE NATIONAL COMMITTEES AND WILL BE
114 DELETED AT THE PUBLICATION STAGE.
IEC CDV 60384-14-2 © IEC 2024 – 5 – 40/3192/CDV
117 INTRODUCTION
118 0 Blank detail specification
119 0.1 General
120 This blank detail specification forms the basis for a uniform procedure for a common
121 international safety mark. It implements the approval schedule for safety tests in
122 IEC 60384-14, requires a declaration of design for parameters relevant to safety and indicates
123 conformance tests to be conducted on every lot prior to its release and requalification tests
124 depending on changes to the declared design.
125 In comparison with IEC 60384-14-1, which provides quality conformance and safety tests, this
126 specification is restricted to safety tests only.
127 A blank detail specification is a supplementary document to the sectional specification and
128 contains requirements for style, layout and minimum content of detail specifications. Detail
129 specifications not complying with these requirements may not be considered as being in
130 accordance with IEC specifications, nor should they so be described.
131 In the preparation of detail specifications, see IEC 60384-14:2023, Clause 7.
132 0.2 Identification of the detail specification
133 The first page of the detail specification should have the layout recommended on the next
134 page of this blank detail specification. The numbers between square brackets in the layout
135 correspond to the following information in [1] to [4] which shoul
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.