EN 62524:2011
(Main)Multimedia systems and equipment - Multimedia e-publishing and e-books - Reader's format for e-publishing
Multimedia systems and equipment - Multimedia e-publishing and e-books - Reader's format for e-publishing
IEC 62524:2009 specifies a reader's format for multimedia e-publishing employed for e-book data interchange among publishers and readers, satisfying a number of readers' requirements such as being non-revisable, equipment-adaptive and application-adaptive.
Multimediasysteme und -geräte - E-Publishing und E-Books für Multimedia-Anwendungen - Reader-Format für E-Publishing
Systèmes et appareils multimedia – Edition électronique multimedia et livres électroniques – Format du lecteur pour édition électronique
La CEI 62524:2009 spécifie un format de lecteur pour l'édition électronique multimédia, utilisé pour l'échange de données de livres électroniques entre éditeurs et lecteurs, satisfaisant à un certain nombre d'exigences des lecteurs telles que le fait d'être non révisable, de pouvoir s'adapter au matériel et de pouvoir s'adapter à l'application.
Večpredstavnostni sistemi in oprema - Večpredstavnostno e-založništvo in e-knjige - Bralni format za e-založništvo (IEC 62524:2009)
Ta mednarodni standard določa bralni format za večpredstavnostno e-založništvo, ki se uporablja za izmenjavo podatkov e-knjig med založniki in bralci in zadostuje številnim bralnim zahtevam, kot so nespremenljivost, prilagajanje opremi in uporabi.
OPOMBA: Ta mednarodni standard ne obravnava naslednjih vprašanj:
elemente, potrebne samo za reprodukcijo končnega tiska;
vprašanj o izvajanju, povezanih s fizičnimi napravami;
vprašanj metapodatkov za upravljanje z dokumenti;
varnostna vprašanja, kot je DRM za dokument.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2011
9HþSUHGVWDYQRVWQLVLVWHPLLQRSUHPD9HþSUHGVWDYQRVWQRH]DORåQLãWYRLQH
NQMLJH%UDOQLIRUPDW]DH]DORåQLãWYR,(&
Multimedia systems and equipment - Multimedia e-publishing and e-books - Reader's
format for e-publishing (IEC 62524:2009)
Multimediasysteme und -geräte – E-Publishing und E-Books für Multimedia-
Anwendungen – Reader-Format für E-Publishing (IEC 62524:2009)
Systèmes et appareils multimedia – Edition électronique multimedia et livres
électroniques – Format du lecteur pour édition électronique (CEI 62524:2009)
Ta slovenski standard je istoveten z: EN 62524:2011
ICS:
01.140.40 Založništvo Publishing
33.160.60 9HþSUHGVWDYQLPXOWLPHGLMVNL Multimedia systems and
VLVWHPLLQRSUHPD]D teleconferencing equipment
WHOHNRQIHUHQFH
35.240.30 Uporabniške rešitve IT v IT applications in information,
informatiki, dokumentiranju in documentation and
založništvu publishing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 62524
NORME EUROPÉENNE
February 2011
EUROPÄISCHE NORM
ICS 33.160.99
English version
Multimedia systems and equipment -
Multimedia e-publishing and e-books -
Reader's format for e-publishing
(IEC 62524:2009)
Systèmes et appareils multimedia – Multimediasysteme und -geräte -
Edition électronique multimedia et livres E-Publishing und E-Books für Multimedia-
électroniques – Format du lecteur pour Anwendungen -
édition électronique Reader-Format für E-Publishing
(CEI 62524:2009) (IEC 62524:2009)
This European Standard was approved by CENELEC on 2011-01-02. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62524:2011 E
Foreword
The text of document 100/1376/CDV, future edition 1 of IEC 62524, prepared by technical area 10,
Multimedia e-publishing and e-books, of IEC TC 100, Audio, video and multimedia systems and
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 62524 on 2011-01-02.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-10-02
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-01-02
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62524:2009 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 62524:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC/TS 62229 2006 Multimedia systems and equipment - - -
Multimedia e-publishing and e-book -
Conceptual model for multimedia e-publishing
IEC 62524 ®
Edition 1.0 2009-02
INTERNATIONAL
STANDARD
Multimedia systems and equipment – Multimedia e-publishing and e-books –
Reader’s format for e-publishing
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
X
ICS 33.160.99 ISBN 978-2-88910-754-4
– 2 – 62524 © IEC:2009(E)
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope.7
2 Normative references .7
3 Terms and definitions .7
4 Position and requirements for reader’s format .8
4.1 Reader’s format in contents creation/distribution model.8
4.2 Requirements for reader’s format .8
4.3 File format.9
4.4 Features of the reader’s Format .9
4.4.1 General .9
4.4.2 Types of displayable elements.9
4.4.3 Layout and styling .9
4.4.4 Fonts .10
4.4.5 E-book specific features .10
5 Conformance level.10
Annex A (normative) C-XMDF reader's format .11
Bibliography.48
Figure 1 – Contents creation/distribution model .8
Figure A.1 – Relation between generic and reader's formats.11
Figure A.2 – A visual example of a text flow.22
Figure A.3 – Relationship between cell flow, cell and scene.26
Figure A.4 – Paragraph tag and an image.31
Figure A.5 – Flowing text interrupted by line break tag.33
Figure A.6 – Horizontal line tag and an image.34
Figure A.7 – Effect of horizontal tag.36
Figure A.8 – Text and image tag .38
Figure A.9 – Effect of align parameter .39
Figure A.10 – Image splitting .42
Table A.1 – File types .11
Table A.2 – Cxmdf_string type .12
Table A.3 – File types .14
Table A.4 – File naming conventions .15
Table A.5 – Media types .16
Table A.6 – The data structure of root file .16
Table A.7 – Special characters .22
Table A.8 – Data structure of text flow control file .23
Table A.9 – Data structure of block control information .25
Table A.10 – Treatment of block boundary.26
Table A.11 – Data structure of cell flow control file .27
62524 © IEC:2009(E) – 3 –
Table A.12 – Data structure of cell control information .28
Table A.13 – Parameters of a paragraph tag stored in block control information .32
Table A.14 – Parameter of a line break tag stored in the block control information.33
Table A.15 – Parameters of a font settings tag stored in the block control information .35
Table A.16 – Parameters of a ruby tag stored in the block control information .36
Table A.17 – Parameter stored in the block control information.36
Table A.18 – Parameters stored in the block control information .37
Table A.19 – Parameters of an image tag stored in the block control information .39
Table A.20 – Parameters of mask tag stored in the block control information .40
Table A.21 – Parameters of link jump tag stored in the block control information .41
Table A.22 – Parameters of a URL jump tag stored in the block control information .41
Table A.23 – Parameters of a mailer launch tag stored in the block control information .42
Table A.24 – Data structure of the MIG format .43
Table A.25 – Gif image support.44
Table A.26 – Possible tag nesting.45
Table A.27 – Conformance levels .46
Table A.28 – Tags eligible for each conformance level.46
Table A.29 – Files eligible for each conformance level.46
– 4 – 62524 © IEC:2009(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MULTIMEDIA SYSTEMS AND EQUIPMENT –
MULTIMEDIA E-PUBLISHING AND E-BOOKS –
READER’S FORMAT FOR E-PUBLISHING
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to app
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.