The present document specifies technical characteristics and methods of measurements for digital terrestrial television
broadcast receivers fitted with an external antenna input (tuner port) capable of receiving DVB-T and/or DVB-T2
signals.
Receivers without external antenna connectors, receivers with diversity, and receivers intended for mobile or
automotive reception are not covered by the present document.
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.3] is given in annex A.
The present document includes considerations of interference from LTE transmissions in the 700 MHz and 800 MHz
bands and DTT transmissions in UHF band IV. The requirements of the installation system (antenna, feeder cable,
amplifiers, etc.) are not addressed.
There are country specific variations of frequency usage for digital terrestrial television reception and other users such
as mobile broadband.
The tests in the present document only apply if the DTT broadcast receiver supports the wanted signal configuration
used by the test in question. The applicable tests are summarized in annex E, table E.1.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    37 pages
    English language
    sale 15% off
  • Standard
    36 pages
    English language
    sale 15% off

IEC TR 63122-1:2019 The focus of this standard is the conceptual definition of smart television, basic features, use cases and current technologies based on applications and requirements. They make it clear where further existing standards can be used and highlight where work on standards is needed.
In addition, this document was developed taking into account ISO/IEC Guide 71. The objective of this document is to highlight potential areas for standardisation for smart televisions.

  • Technical report
    27 pages
    English language
    sale 15% off

IEC TR 63122-2:2019 specifies the service pattern conceptual model and standardized demand of smart television, illustrates the terms and related to smart television, and describes service reference model of smart television, the reference model of the service pattern as well as interfaces between various platforms.

  • Technical report
    44 pages
    English language
    sale 15% off

This International Standard specifies the text-to-speech functionality for a (broadcast) receiver
with a text-to-speech system. Such a system may be one device, i.e. a receiver with an
integrated text-to-speech generator, or may be two devices, i.e. a receiver interfacing with an
external text-to-speech device. This document applies only to completely functional stationary
(or semi-stationary) digital TV receivers such as set top boxes, integrated digital TVs,
recorders and other products whose primary function is to receive TV content. Where this
document refers to TV, this will be shorthand for all such receivers.
This document does not apply to products that are capable of receiving TV as a secondary
function (e.g. PCs or game consoles with digital television receivers). It also does not apply to
sub-assemblies (e.g. PC tuner cards).

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62442-1:2018 is available as IEC 62442-1:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62442-1:2018 defines a measurement and calculation method of the total input power for controlgear-lamp circuits when operating with their associated fluorescent lamp(s). The calculation method for the efficiency of the lamp controlgear is also defined. This document applies to electrical controlgear-lamp circuits consisting only of the controlgear and the lamp(s). It is intended for use on DC supplies up to 1 000 V and/or AC supplies up to 1 000 V at 50 Hz or 60 Hz. This second edition cancels and replaces the first edition published in 2011. This edition constitutes a technical revision and has been harmonized with IEC 62442-2 and IEC 62442­3.

  • Standard
    41 pages
    English and French language
    sale 15% off

IEC 62731:2018(E) specifies the text-to-speech functionality for a (broadcast) receiver with a text-to-speech system. Such a system may be one device, i.e. a receiver with an integrated text-to-speech generator, or may be two devices, i.e. a receiver interfacing with an external text-to-speech device. This document applies only to completely functional stationary (or semi-stationary) digital TV receivers such as set top boxes, integrated digital TVs, recorders and other products whose primary function is to receive TV content. Where this document refers to TV, this will be shorthand for all such receivers. This document does not apply to products that are capable of receiving TV as a secondary function (e.g. PCs or game consoles with digital television receivers). It also does not apply to sub-assemblies (e.g. PC tuner cards). This edition includes the following significant technical changes with respect to the previous edition: a) in 6.2, the levels of announcement quality were revised as well as considerations for ways in which device users can provide service providers with feedback on incorrectly announced terms. b) in 6.3, the following TV functionality was added: the TV can receive updated words, associated conversions and updated conversion rules for the TTS engine via a network connection.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a set of principles and considerations for digital television products in
support of older people and persons with disabilities in addition to mainstream users. The
effect of following the principles and considerations as set out in this document is to ensure
that the widest range of users can access, understand and use digital television products.
These principles and considerations cover four main user profiles such as individuals with
hearing impairments, individuals with sight impairments, individuals with mobility impairments
and individuals with cognitive impairments.
This document applies to consumer solutions whose primary function is to receive digital
television, such as integrated digital televisions, set top boxes, digital television recorders and
equivalent products and devices (see Annex D). All these solutions are referred to as digital
television solutions throughout this document. The standard does not cover solutions that
support digital television as a secondary function (for instance gaming consoles or computers
with digital receiver cards). However, much of the content also provides for future solutions
and/or implementations.This document does not cover delivery, unpacking, secure installation
on a stand or wall mounting or first time connection of the power and signals.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62731:2018(E) specifies the text-to-speech functionality for a (broadcast) receiver with a text-to-speech system. Such a system may be one device, i.e. a receiver with an integrated text-to-speech generator, or may be two devices, i.e. a receiver interfacing with an external text-to-speech device. This document applies only to completely functional stationary (or semi-stationary) digital TV receivers such as set top boxes, integrated digital TVs, recorders and other products whose primary function is to receive TV content. Where this document refers to TV, this will be shorthand for all such receivers.
This document does not apply to products that are capable of receiving TV as a secondary function (e.g. PCs or game consoles with digital television receivers). It also does not apply to sub-assemblies (e.g. PC tuner cards).
This edition includes the following significant technical changes with respect to the previous edition:
a) in 6.2, the levels of announcement quality were revised as well as considerations for ways in which device users can provide service providers with feedback on incorrectly announced terms.
b) in 6.3, the following TV functionality was added: the TV can receive updated words, associated conversions and updated conversion rules for the TTS engine via a network connection.

  • Standard
    19 pages
    English language
    sale 15% off

The present document applies to digital terrestrial television broadcast receivers fitted with an external antenna input
(tuner port) capable of receiving DVB-T and/or DVB-T2 signals. Receivers without external antenna connectors,
receivers with diversity, and receivers intended for mobile or automotive reception are not covered by the present
document.
The present document contains the requirements for digital terrestrial television broadcast receivers to meet the essential
requirements of article 3.2 of Directive 2014/53/EU [i.3] that radio equipment both effectively uses and supports the
efficient use of radio spectrum in order to avoid harmful interference.
The present document includes considerations of interference from LTE transmissions in the 700 MHz and 800 MHz
bands and DTT transmissions in UHF band IV. The requirements of the installation system (antenna, feeder cable,
amplifiers, etc.) are not addressed.
There are country specific variations of frequency usage for digital terrestrial television reception and other users such
as mobile broadband.
The tests in the present document only apply if the DTT broadcast receiver supports the wanted signal configuration
used by the test in question. The applicable tests are summarized in annex E, table E.1.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    33 pages
    English language
    sale 15% off

This part of IEC 62087 specifies the determination of the power consumption and related
characteristics of television sets. Television sets include, but are not limited to, those with
CRT, LCD, PDP, OLED, or projection technologies.
The operating modes and functions, as they specifically apply to television sets, are defined
in detail in this part of IEC 62087.
This standard is limited to television sets that can be connected to an external power source.
Television sets that include a non-removable, main battery are not covered by this standard.
Television sets may include any number of auxiliary batteries.
The measuring conditions in this standard represent the normal use of the equipment and
may differ from specific conditions, for example as specified in safety standards.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This International Standard specifies the basic functions, interfaces, performance
requirements and test methods of the receivers for the Digital Terrestrial/Television
Multimedia Broadcasting (DTMB) system. This standard can be applied to digital television
terrestrial receivers carrying multiple SDTV programs or HDTV programs for both mobile and
stationary receptions.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC TR 61967-1-1:2015(E) provides guidance for exchanging data generated by near-field scan measurements. The described exchange format could also be used for near-field scan data generated by simulation or computation software. It should be noted that, although it has been developed for near-field scan, its use is not restricted to this application. The exchange format can be applied to emission and immunity near-field scan data in the frequency and time domains. The scope of this technical report includes neither the methods used for the measurements or simulations, nor the software and algorithms used for generating the exchange file or for processing or viewing the data contained therein. This edition includes the following significant changes with respect to the previous edition:
- Addition of: 3D objects; Binary data files; Piece-wise linear time domain and frequency domain data; Vectors permitting rotation and offset of measurement and DUT reference planes; Transducer gain and probe factor can be complex; New keywords: Object3d, Mapobj, Maxhold, Datafileformat, Vx, Vy, Vz, Target, Software, Data_source.
- Updating of: Probe factor and corresponding keywords.
- Modification of: Keywords: Average.

  • Technical report
    63 pages
    English language
    sale 15% off

IEC 62875:2015 specifies the printing quality of the texture map on paper. The texture map for auditory presentation of printed texts is printed on paper or shown on display devices.

  • Standard
    15 pages
    English language
    sale 15% off
  • Standard
    30 pages
    English and French language
    sale 15% off

IEC 60984:2014 is applicable to electrical insulating sleeves for the protection of workers from accidental contact with live electrical conductors, apparatus or circuits. The products designed and manufactured according to this standard contribute to the safety of the users provided they are used by skilled persons, in accordance with safe methods of work and the instructions for use. Unless otherwise stated, in this standard the term "sleeve" is used for "electrical insulating sleeve". This second edition cancels and replaces the first edition, published in 1990 and its Amendment 1 published in 2002. It constitutes a technical revision which includes the following major changes:
- removal of the requirement for an area to mark the date of inspection;
- only the straight mounting method with water electrodes is specified for the dielectric type test;
- the d.c. electric tests are no longer included in the normative part of the document, but a new informative Annex E is added;
- preparation of the elements of evaluation of defects, and general application of IEC 61318:2007;
- in the new normative Annex F, updating of the characteristics of the liquid specified for tests on sleeves of category H, according to the latest edition of ISO 1817;
- introduction of a new normative Annex G on classification of defects;
- introduction of a new informative Annex H on the rationale for the classification of defects;
- and for periodic electrical retesting, recommended voltage limit of the dielectric test methods to 10 kV except in case of the test method with water electrodes and straight mounting.

  • Standard
    89 pages
    English and French language
    sale 15% off

This part of IEC 62516 describes the T-DMB common application program interface (API). It provides a software platform that, when combined with the T-DMB O/S, forms a universal interface for application programs. This interface allows application programs to be written in such a way that they run on any T-DMB receiver unit, as described in IEC 62516-1:2009 and IEC 62516-2:2011 regardless of its manufacturer. This part of IEC 62516 also defines a software environment that allows multiple application programs to be interoperable on a single receiver unit by sharing the fixed resources of the receiver, and it provides a set of interfaces that the T-DMB middleware and the ASIC specific software use.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62516-3:2013 describes the T-DMB common application program interface (API). It provides a software platform that, when combined with the T-DMB O/S, forms a universal interface for application programs. This interface allows application programs to be written in such a way that they run on any T-DMB receiver unit, as described in IEC 62516-1:2009 and IEC 62516-2:2011 regardless of its manufacturer. It also defines a software environment that allows multiple application programs to be interoperable on a single receiver unit by sharing the fixed resources of the receiver, and it provides a set of interfaces that the T-DMB middleware and the ASIC specific software use.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62516-3:2013 describes the T-DMB common application program interface (API). It provides a software platform that, when combined with the T-DMB O/S, forms a universal interface for application programs. This interface allows application programs to be written in such a way that they run on any T-DMB receiver unit, as described in IEC 62516-1:2009 and IEC 62516-2:2011 regardless of its manufacturer. It also defines a software environment that allows multiple application programs to be interoperable on a single receiver unit by sharing the fixed resources of the receiver, and it provides a set of interfaces that the T-DMB middleware and the ASIC specific software use.

  • Standard
    59 pages
    English and French language
    sale 15% off

This part of IEC 62516 specifies the characteristics and requirements for interactive data
services using binary format for scene (BIFS) in the terrestrial digital multimedia broadcasting (T-DMB) receiver.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This International Standard specifies both Standard Definition and High Definition receivers for the DVB-T system. It concerns: - broadcasters, and - receiver manufacturers. The objective is to define: - how to provide broadcasts that are understood by all receivers and enable receivers to provide good facilities to their users; - the behaviour required from receivers to work well with these broadcasts and to be attractive to consumers. To avoid doubt, the words “shall”, “should”, etc. are used in the traditional way to distinguish issues that are mandatory versus those that are optional A baseline receiver will support the mandatory features but not all the optional features in this standard. Inclusion of optional features is part of the marketing strategy of the manufacturer. Subtitling and teletext are considered to be components of TV services. Standalone teletext services (without associated video content) are not part of this standard. This standard primarily addresses terrestrial delivery of digital transmissions. This standard primarily addresses deployment in countries that use European Latin script based languages. Two types of systems are considered: - standard systems where services are all SD and use well-established codecs. Standard receivers which can decode standard services are suitable for these systems; - advanced systems where some services may use advanced codecs, for example to provide HD video. Advanced receivers which can decode advanced services are suitable for these systems. Where the term “receiver” or “broadcast” is used without a qualifier, the statement is applicable equally to both types of systems.

  • Standard
    140 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62216:2009(E) specifies both Standard Definition and High Definition receivers for the DVB-T system. Subtitling and teletext are considered to be components of TV services. It addresses terrestrial delivery of digital transmissions and deployment in countries that use European Latin script based languages. Two types of systems are considered: - standard systems where services are all SD and - use well-established codecs. Standard receivers which can decode standard services are suitable for these systems; advanced systems where some services may use advanced codecs, for example to provide HD video. Advanced receivers which can decode advanced services are suitable for these systems.

  • Standard
    140 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62546:2009(E) specifies the communication protocol between a TV receiver and a video recorder which are connected through a digital interface.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 62516 specifies the characteristics and minimum required performance for terrestrial digital multimedia broadcasting (T-DMB) receivers. The contents of this standard include T-DMB system information, video, audio, and MPEG-4 BIFS data.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62546:2009 specifies the communication protocol between a TV receiver and a video recorder which are connected through a digital interface.

  • Standard
    28 pages
    English language
    sale 15% off
  • Standard
    58 pages
    English and French language
    sale 15% off

IEC 62516-1:2009 specifies the characteristics and minimum required performance for terrestrial digital multimedia broadcasting (T-DMB) receivers. The contents of this standard include T-DMB system information, video, audio, and MPEG-4 BIFS data.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62216:2009 specifies both Standard Definition and High Definition receivers for the DVB-T system. Subtitling and teletext are considered to be components of TV services. It addresses terrestrial delivery of digital transmissions and deployment in countries that use European Latin script based languages. Two types of systems are considered:
- standard systems where services are all SD and
- use well-established codecs.
Standard receivers which can decode standard services are suitable for these systems; advanced systems where some services may use advanced codecs, for example to provide HD video. Advanced receivers which can decode advanced services are suitable for these systems.

  • Standard
    135 pages
    English language
    sale 15% off
  • Standard
    285 pages
    English and French language
    sale 15% off

IEC 62365:2009 specifies a means to carry multiple channels of audio in linear PCM or IEC 60958-4 format over an ATM layer service conforming to ITU-T Recommendation I.150. It includes a means to convey, between parties, information concerning the digital audio signal when setting up audio calls across the ATM network. This bilingual version (2012-08) corresponds to the monolingual English version, published in 2009. This second edition of IEC 62365 cancels and replaces the first edition published in 2004.The main changes with respect to the previous edition (2004) are: second, third, and fourth required formats in 4.3 removed. 4.3 reformatted, eliminating Table 2, and subsequent Tables renumbered.

  • Standard
    59 pages
    English and French language
    sale 15% off

IEC 62516-1:2009 specifies the characteristics and minimum required performance for terrestrial digital multimedia broadcasting (T-DMB) receivers. The contents of this standard include T-DMB system information, video, audio, and MPEG-4 BIFS data.

  • Standard
    49 pages
    English and French language
    sale 15% off

IEC 62360:2008(E) specifies the basic functions, ratings, and performance of receivers for the Integrated Services Digital Broadcasting (ISDB) system. It applies to: receivers for standard digital television broadcasting, high-definition television broadcasting, and radio broadcasting from satellite broadcasting stations in the frequency band of 11,7 GHz to 12,2 GHz, receivers for standard digital television broadcasting with a bandwidth of 34,5 MHz, from satellite broadcasting stations in the frequency band of 12,2 GHz to 12,75 GHz and receivers for the standard digital television broadcasting and high-definition television broadcasting from terrestrial broadcasting stations.This second edition cancels and replaces the first edition, published in 2004 and constitutes a technical revision. The main changes with respect to the previous edition are: the non-volatile memory size for terrestrial; BS and CS receiver has been specified; desirable reception channel range of the receiver for VHF and MID band has been specified; DVI interface and HDMI interface have been specified as digital interface; down mixing formula from multi-channel to 2-channel stereo has been changed.

  • Standard
    78 pages
    English language
    sale 15% off

specifies the TeleWeb Hyperteletext profile that allows Web-style text and graphics to be displayed on suitable decoders. A TeleWeb service comprises multimedia data files whose format and attributes are defined by this specification

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day

specifies the TeleWeb Hyperteletext profile that allows Web-style text and graphics to be displayed on suitable decoders. A TeleWeb service comprises multimedia data files whose format and attributes are defined by this specification

  • Standard
    36 pages
    English language
    sale 15% off

Deals with the determination of performance and allows the comparison of equipment, by listing the characteristics useful for specifications and laying down uniform measuring methods.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day

To cope with the change requests for bit-allocations and align with the ITU-R Rec.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Wide screen signalling specification for terrestrial TV services (PAL/SECAM, PALplus); wide screen letterbox (aspect ratio 16:9, film bit, subtitling)

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Microwave specification based on DVB-T  support - DVB project

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specification for the transmission of a Ghosting Cancellation Reference (GCR) signal which may be used by special receivers to remove or reduce ghosting on the received picture. Use of the Line 318 GCR signal as defined in ITU-R BT.1124 for application in Europe.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Error in table 2 on page 12. In the top left box of table 2 it reads b0b1b0; this should be b0b1b2. Request from Philipps/Thomson .The error is not vey serious because the text above the table is correct. Editorial change & conversion ETS 300 294 Ed.3 into EN 300 294 version 1.3.2.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The former EACEM Project Team 1.4 (Data Services) prepared some changes, corrections and additions. The details are given in document J23d06, submitted to the 23rd meeting of JTC Broadcast.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This amendment is introduced to review minor technical and editorial d etails of the document.

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

PALplus is an enhanced 625-line PAL transmission system allowing broadcasting of 16:9 wide-screen picutes with greately reduced levels of conventional PAL artefacts, whilst retaining a high level of compatibility with existing PAL transmission infrastrucutre and receivers.

  • Standard
    110 pages
    English language
    sale 10% off
    e-Library read for
    1 day

To include copyright information in bits 12 and 13.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Gives methods of measurement for television broadcast receivers under conditions in which the signal presented to the receiver is not in accordance with the specifications for broadcast signals adopted by the CCIR. Such nonstandard signals may be produced by video tape recorders, video disc players and television games, among other sources. Specifies methods of measurement for those characteristics of broadcast television receivers using existing technology which have been found, by experience of the nature of signals produced by existing types of ancillary equipment and systems, to be significant in determining their mutual compatibility.

  • Standardization document
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Applies to television receivers designed for the reception of television broadcast transmissions with multichannel sound using the two-carrier FM system. This consolidated version consists of the first edition (1988) and its amendment 1 (1999). Therefore, no need to order amendment in addition to this publication.

  • Standard
    35 pages
    English and French language
    sale 15% off

This standard specifies the characteristics of Digital Video Broadcast (DVB) receivers for satellite, cable and terrestrial reception in Europe

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Initially handled by TC 206 (disbanded) * D141/C101: Transferred to new TC 100X

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day

EN following parallel vote * Corrigendum to EN issued May 1997

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies elements and describes characteristics for remote channel-installation of TV and VCR sets, by use of teletext

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

EN following parallel vote

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day