EN 62343-5-1:2009

Dynamic modules - Test methods - Part 5-1: Dynamic gain tilt equalizer - Response time measurement

IEC 62343-5-1:2009(E) contains the measurement method of response time for a dynamic gain tilt equalizer (DGTE) to change its gain tilt from an arbitrary initial value to a desired target value.

Dynamische Module - Prüfverfahren - Teil 5-1: Equalizer zur Kompensation einer dynamischen Verstärkerkennlinie - Messung der Antwortzeit

Modules dynamiques - Méthodes d'essais - Partie 5-1: Egaliseur dynamique de basculement de gain - Mesure du temps de réponse

IEC 62343-5-1:2009 contient la méthode de mesure du temps de réponse d'un égaliseur dynamique de basculement de gain (DGTE, Dynamic Gain Tilt Equalizer) nécessaire pour basculer le gain d'une valeur initiale arbitraire à une valeur cible désirée. Mots clés: égaliseur dynamique de basculement de gain (DGTE, Dynamic Gain Tilt Equalizer)

Dinamični moduli - Preskusne metode - 5-1. del: Stabilizator neenakomernosti dinamičnega ojačenja - Merjenje odzivnega časa (IEC 62343-5-1:2009)

General Information

• Status: Withdrawn
• Publication Date: 10-Sep-2009
• Withdrawal Date: 31-Jul-2012
• ICS: 33.180.01 - Fibre optic systems in general
• ICS: 33.180.99 - Other fibre optic equipment
• Technical Committee: CLC/SR 86C - Fibre optic systems and active devices
• Drafting Committee: IEC/SC 86C - IEC_SC_86C
• Parallel Committee: IEC/SC 86C - IEC_SC_86C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 30-Dec-2017
• Completion Date: 30-Dec-2017
• Ref Project: SIST EN 62343-5-1:2009 - Dynamic modules - Test methods - Part 5-1: Dynamic gain tilt equalizer - Response time measurement (IEC 62343-5-1:2009)

Relations

• Replaced By: EN 62343-5-1:2015 - Dynamic modules - Part 5-1: Test methods - Dynamic gain tilt equalizer - Gain tilt settling time measurement
• Effective Date: 17-Mar-2015

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2009
'LQDPLþQLPRGXOL3UHVNXVQHPHWRGHGHO6WDELOL]DWRUQHHQDNRPHUQRVWL
GLQDPLþQHJDRMDþHQMD0HUMHQMHRG]LYQHJDþDVD,(&
Dynamic modules - Test methods - Part 5-1: Dynamic gain tilt equalizer - Response time
measurement (IEC 62343-5-1:2009)
Dynamische Module - Prüfverfahren - Teil 5-1: Equalizer zur Kompensation einer
dynamischen Verstärkerkennlinie - Messung der Antwortzeit (IEC 62343-5-1:2009)
Modules dynamiques - Méthodes d'essais - Partie 5-1: Egaliseur dynamique de
basculement de gain - Mesure du temps de réponse (CEI 62343-5-1:2009)
Ta slovenski standard je istoveten z: EN 62343-5-1:2009
ICS:
33.180.30 2SWLþQLRMDþHYDOQLNL Optic amplifiers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62343-5-1
NORME EUROPÉENNE
September 2009
EUROPÄISCHE NORM
ICS 33.180.01;33.180.99
English version
Dynamic modules -
Test methods -
Part 5-1: Dynamic gain tilt equalizer -
Response time measurement
(IEC 62343-5-1:2009)
Modules dynamiques -  Dynamische Module -
Méthodes d'essais - Prüfverfahren -
Partie 5-1 : Egaliseur dynamique Teil 5-1: Equalizer zur Kompensation
de basculement de gain - einer dynamischen Verstärkerkennlinie -
Mesure du temps de réponse Messung der Antwortzeit
(CEI 62343-5-1:2009) (IEC 62343-5-1:2009)

This European Standard was approved by CENELEC on 2009-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62343-5-1:2009 E
Foreword
The text of document 86C/883/FDIS, future edition 1 of IEC 62343-5-1, prepared by SC 86C, Fibre optic
systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 62343-5-1 on 2009-08-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-08-01
__________
Endorsement notice
The text of the International Standard IEC 62343-5-1:2009 was approved by CENELEC as a European
Standard without any modification.
__________
IEC 62343-5-1 ®
Edition 1.0 2009-06
INTERNATIONAL
STANDARD
Dynamic modules – Test methods –
Part 5-1: Dynamic gain tilt equalizer – Response time measurement

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
R
ICS 33.180.01; 33.180.99 ISBN 2-8318-1050-7
– 2 – 62343-5-1 © IEC:2009(E)
CONTENTS
FOREWORD.4
1 Scope and general information .6
2 Terms, definitions, abbreviations and response waveforms .6
2.1 Terms and definitions .6
2.2 Abbreviations .7
2.3 Response waveforms .7
3 Apparatus.9
3.1 Light source .9
3.2 Pulse generator.9
3.3 O/E converter .10
3.4 Temperature and humidity chamber .10
3.5 Oscilloscope.10
3.6 Temporary joints .10
3.7 Control system .10
3.8 Measurement set-up.10
4 Procedure .11
4.1 Direct control type .11
4.1.1 Set-up .11
4.1.2 Preparation.12
4.1.3 Wavelength setting .12
4.1.4 Pulse generator setting.12
4.1.5 Applying the driving pulse.12
4.1.6 Monitoring and recording the output signal from DGTE under test
(DUT) .12
4.1.7 Calculation of the response time.12
4.2 Digital control type .12
4.2.1 Set-up .12
4.2.2 Preparation.12
4.2.3 Wavelength setting .12
4.2.4 Sending command.12
4.2.5 Monitoring and recording the command complete flag .13
4.2.6 Calculation of the response time.13
4.3 Analogue control type.13
4.3.1 Set-up .13
4.3.2 Preparation.13
4.3.3 Wavelength setting .13
4.3.4 Applying the control signal.13
4.3.5 Monitoring and recording the command complete flag .13
4.3.6 Calculation of the response time.13
5 Details to be specified .14
5.1 Apparatus.14
5.1.1 Light source.14
5.1.2 Pulse generator .14
5.1.3 O/E converter .14
5.1.4 Control system .14
5.2 Measurement conditions.14

62343-5-1 © IEC:2009(E) – 3 –
Annex A (informative) Convergence criterion .15
Annex B (informative) Measurement examples .16
Annex C (informative) Response time for specific DGTEs .17
Annex D (informative) Necessity for the correction of temperature dependency .18

Figure 1 – Response waveforms for direct control DGTEs .8
Figure 2 – Response waveforms for digital control DGTEs.8
Figure 3 – Response waveforms for analogue control DGTEs.9
Figure 4 – Measurement set-up for direct control .10
Figure 5 – Measurement set-up for digital control .11
Figure 6 – Measurement set-up for analogue control .11
Figure B.1 – In case of insertion loss change is enough.16
Figure B.2 – In case of insertion loss change is small .16

Table 1 – The categorization of DGTE by the control method .6

– 4 – 62343-5-1 © IEC:2009(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DYNAMIC MODULES –
TEST METHODS –
Part 5-1: Dynamic gain tilt equalizer –
Response time measurement
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62343-5-1 has been prepared by subcommittee 86C: Fibre opt
...