EN 60793-1-48:2007

Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion

Applies to three methods of measuring polarization mode dispersion (PMD). Establishes uniform requirements for measuring the PMD of single-mode optical fibre, thereby assisting in the inspection of fibres and cables for commercial purposes. In this edition, reference to IEC 61282-9 has resulted in the removal of Annexes E, F, G and H as well as the creation of a new Annex E.

Lichtwellenleiter - Teil 1-48: Messmethoden und Prüfverfahren - Polarisationsmodendispersion

Fibres optiques - Partie 1-48: Méthodes de mesure et procédures d'essai - Dispersion du mode de polarisation

S'appliques aux trois méthodes de mesure de la dispersion de mode de polarisation (Polarization Mode Dispersion, PMD). Elle établit des exigences uniformes pour mesurer la PMD d'une fibre optique unimodale, de façon à aider dans l'examen des fibres et des câbles à des fins commerciales. Dans cette édition, la référence à la CEI 61289-2 a entraîné le retrait des Annexes E, F, G et H ainsi que la création d'une nouvelle Annexe E.

Optična vlakna - 1-48. del: Metode merjenja in preskusni postopki - disperzija z načinom polarizacije (IEC 60793-1-48:2007)

General Information

• Status: Withdrawn
• Publication Date: 29-Nov-2007
• Withdrawal Date: 31-Aug-2010
• ICS: 33.180.10 - Fibres and cables
• Technical Committee: CLC/TC 86A - Optical fibres and optical fibre cables
• Drafting Committee: IEC/SC 86A - IEC_SC_86A
• Parallel Committee: IEC/SC 86A - IEC_SC_86A
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 27-Sep-2020
• Completion Date: 27-Sep-2020
• Ref Project: SIST EN 60793-1-48:2008 - Optical fibres -- Part 1-48: Measurement methods and test procedures - Polarization mode dispersion

Relations

• Replaces: EN 60793-1-48:2003 - Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion
• Effective Date: 28-Jan-2023
• Replaced By: EN 60793-1-48:2017 - Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode Dispersion
• Effective Date: 03-Nov-2015

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60793-1-48:2008
01-februar-2008
1DGRPHãþD
SIST EN 60793-1-48:2004
2SWLþQDYODNQDGHO0HWRGHPHUMHQMDLQSUHVNXVQLSRVWRSNLGLVSHU]LMD]
QDþLQRPSRODUL]DFLMH,(&
Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization
mode dispersion (IEC 60793-1-48:2007)
Lichtwellenleiter - Teil 1-48: Messmethoden und Prüfverfahren -
Polarisationsmodendispersion (IEC 60793-1-48:2007)
Fibres optiques - Partie 1-48: Méthodes de mesure et procédures d'essai - Dispersion du
mode de polarisation (IEC 60793-1-48:2007)
Ta slovenski standard je istoveten z: EN 60793-1-48:2007
ICS:
33.180.10 2SWLþQDYODNQDLQNDEOL Fibres and cables
SIST EN 60793-1-48:2008 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60793-1-48

NORME EUROPÉENNE
November 2007
EUROPÄISCHE NORM

ICS 33.180.10 Supersedes EN 60793-1-48:2003


English version


Optical fibres -
Part 1-48: Measurement methods and test procedures -
Polarization mode dispersion
(IEC 60793-1-48:2007)


Fibres optiques -  Lichtwellenleiter -
Partie 1-48: Méthodes de mesure Teil 1-48: Messmethoden
et procédures d'essai -
und Prüfverfahren -
Dispersion du mode de polarisation Polarisationsmodendispersion
(CEI 60793-1-48:2007) (IEC 60793-1-48:2007)




This European Standard was approved by CENELEC on 2007-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60793-1-48:2007 E

---------------------- Page: 2 ----------------------

EN 60793-1-48:2007 – 2 –
Foreword
The text of document 86A/1038/CDV, future edition 2 of IEC 60793-1-48, prepared by SC 86A, Fibres
and cables, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel Unique Acceptance
Procedure and was approved by CENELEC as EN 60793-1-48 on 2007-09-01.
This European Standard supersedes EN 60793-1-48:2003.
In EN 60793-1-48:2007, reference to IEC/TR 61282-9 has resulted in the removal of Annexes E, F, G and
H as well as the creation of a new Annex E.
This standard is to be used in conjunction with EN 60793-1-1.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60793-1-48:2007 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

– 3 – EN 60793-1-48:2007

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1) 2)
IEC 60793-1-1 – Optical fibres - EN 60793-1-1 2003
Part 1-1: Measurement methods and test
procedures - General and guidance


1) 2)
IEC 60793-1-44 – Optical fibres - EN 60793-1-44 2002
Part 1-44: Measurement methods and test
pr
...