EN 55016-2-1:2014

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements

CISPR 16-2-1:2014 is designated a basic standard, which specifies the methods of measurement of disturbance phenomena in general in the frequency range 9 kHz to 18 GHz and especially of conducted disturbance phenomena in the frequency range 9 kHz to 30 MHz. With a CDNE, the frequency range is 9 kHz to 300 Hz. This third edition cancels and replaces the second edition published in 2008, Amendment 1:2010 and Amendment 2:2013. This edition constitutes a technical revision which includes added methods of measurement using a new type of ancillary equipment: the CDNE.

Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Teil 2-1: Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Messung der leitungsgeführten Störaussendung

Spécifications des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 2-1: Méthodes de mesure des perturbations et de l'immunité - Mesures des perturbations conduites

Specifikacija za merilne naprave in metode za merjenje radijskih motenj in odpornosti - 2-1. del: Metode za merjenje radijskih motenj in odpornosti - Merjenje motenj po vodnikih

Standard EN 55016-2-1 je osnovni standard, ki določa metode za merjenje motenj na splošno v frekvenčnem območju od 9 kHz do 18 GHz in zlasti merjenje motenj po vodnikih v frekvenčnem območju od 9 kHz do 30 MHz. Pri CDNE je frekvenčno območje od 9 kHz do 300 Hz.

General Information

• Status: Published
• Publication Date: 10-Jul-2014
• Withdrawal Date: 01-Apr-2017
• ICS: 33.100.10 - Emission
• ICS: 33.100.20 - Immunity
• Technical Committee: CLC/TC 210 - Electromagnetic Compatibility (EMC)
• Drafting Committee: IEC/SC CISPR/A - Merjenje radijskih interferenc in statistične metode
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 11-Jul-2014
• Completion Date: 11-Jul-2014
• Directive: 2004/108/EC - Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Ref Project: SIST EN 55016-2-1:2014 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements

Relations

• Replaces: EN 55016-2-1:2009/A1:2011 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements
• Effective Date: 29-Jan-2023
• Replaces: EN 55016-2-1:2009/A2:2013 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements
• Effective Date: 29-Jan-2023
• Replaces: EN 55016-2-1:2009 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements
• Effective Date: 28-Jan-2023
• Amended By: EN 55016-2-1:2014/A1:2017 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements
• Effective Date: 26-Jan-2023
• Corrected By: EN 55016-2-1:2014/AC:2020-09 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements
• Effective Date: 06-Oct-2020

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2014
1DGRPHãþD
SIST EN 55016-2-1:2009
SIST EN 55016-2-1:2009/A1:2011
SIST EN 55016-2-1:2009/A2:2013
Specifikacija za merilne naprave in metode za merjenje radijskih motenj in
odpornosti - 2-1. del: Metode za merjenje radijskih motenj in odpornosti - Merjenje
motenj po vodnikih
Specification for radio disturbance and immunity measuring apparatus and methods -
Part 2-1: Methods of measurement of disturbances and immunity - Conducted
disturbance measurements
Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur
Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Teil
2-1: Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und
Störfestigkeit - Messung der leitungsgeführten Störaussendung
Spécifications des méthodes et des appareils de mesure des perturbations
radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 2-1:
Méthodes de mesure des perturbations et de l'immunité - Mesures des perturbations
conduites
Ta slovenski standard je istoveten z: EN 55016-2-1:2014
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
33.100.20 Imunost Immunity
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 55016-2-1

NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2014
ICS 33.100.10; 33.100.20 Supersedes EN 55016-2-1:2009
English Version
Specification for radio disturbance and immunity measuring
apparatus and methods - Part 2-1: Methods of measurement of
disturbances and immunity - Conducted disturbance
measurements
(CISPR 16-2-1:2014)
Spécifications des méthodes et des appareils de mesure Anforderungen an Geräte und Einrichtungen sowie
des perturbations radioélectriques et de l'immunité aux Festlegung der Verfahren zur Messung der hochfrequenten
perturbations radioélectriques - Partie 2-1: Méthodes de Störaussendung (Funkstörungen) und Störfestigkeit - Teil 2-
mesure des perturbations et de l'immunité - Mesures des 1: Verfahren zur Messung der hochfrequenten
perturbations conduites Störaussendung (Funkstörungen) und Störfestigkeit -
(CISPR 16-2-1:2014) Messung der leitungsgeführten Störaussendung
(CISPR 16-2-1:2014)
This European Standard was approved by CENELEC on 2014-04-02. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 55016-2-1:2014 E
Foreword
The text of document CISPR/A/1053/FDIS, future edition 3 of CISPR 16-2-1, prepared by SC A
“Radio-interference measurements and statistical methods” of IEC/TC CISPR “International special
committee on radio interference” was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 55016-2-1:2014.
The following dates are fixed:
• latest date by which the document has to be (dop) 2015-01-11
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2017-04-02
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 55016-2-1:2009.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard CISPR 16-2-1:2014 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

1)
CISPR 11:2003 + A1:2004 NOTE Harmonized as EN 55011:2007 (modified).
CISPR 16-1-4:2010 NOTE Harmonized as EN 55016-1-4:2010 (not modified).
CISPR 16-2-3:2010 NOTE Harmonized as EN 55016-2-3:2010 (not modified).
IEC 60364-4 Series NOTE Harmonized as HD 60364-4 Series (modified).
IEC 61000-4-6:2008 NOTE Harmonized as EN 61000-4-6:2009 (modified).
IEC 61010-1:2001 NOTE Harmonized as EN 61010-1:2001 (modified).

1)
Superseded by EN 55011:2009 (CISPR 11:2009, mod.)

- 3 - EN 55016-2-1:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year
CISPR 14-1 -  Electromagnetic compatibility - EN 55014-1 -
Requirements for household appliances,
electric tools and similar apparatus -
Part 1: Emission
CISPR 16-1-1 2010 Specification for radio disturbance and EN 55016-1-1 2010
immunity measuring apparatus and
methods -
Part 1-1: Radio disturbance and immunity
measuring apparatus - Measuring
apparatus
CISPR 16-1-2 2014 Specification for radio disturbance and EN 55016-1-2 2014
immunity measuring apparatus and
methods -
Part 1-2: Radio disturbance and immunity
measuring apparatus - Coupling devices
for conducted disturbance measurements
CISPR 16-4-2 -  Specification for radio disturbance and EN 55016-4-2 -
immunity measuring apparatus and
methods -
Part 4-2: Uncertainties, statistics and limit
modelling - Measurement instrumentation
uncertainty
IEC 60050 Series International Electrotechnical Vocabulary - -

CISPR 16-2-1 ®
Edition 3.0 2014-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE

COMITÉ INTERNATIONAL SPÉCIAL DES PERTURBATIONS RADIOÉLECTRIQUES

BASIC EMC PUBLICATION
PUBLICATION FONDAMENTALE EN CEM

Specification for radio disturbance and immunity measuring apparatus and

methods –
Part 2-1: Methods of measurement of disturbances and immunity – Conducted

disturbance measurements
Spécifications des méthodes et des appareils de mesure des perturbations

radioélectriques et de l'immunité aux perturbations radioélectriques –

Partie 2-1: Méthodes de mesure des perturbations et de l'immunité – Mesures

des perturbations conduites
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XE
ICS 33.100.10, 33.100.20 ISBN 978-2-8322-1445-9

– 2 – CISPR 16-2-1:2014 © IEC 2014
CONTENTS
FOREWORD . 8
1 Scope . 10
2 Normative references . 10
3 Terms, definitions and abbreviations . 11
3.1 Terms and definitions . 11
3.2 Abbreviations . 16
4 Types of disturbance to be measured . 17
4.1 General . 17
4.2 Types of disturbance . 17
4.3 Detector functions . 17
5 Connection of measuring equipment . 18
5.1 General . 18
5.2 Connection of ancillary equipment . 18
5.3 Connections to RF reference ground . 18
5.4 Connection between the EUT and the artificial mains network . 19
6 General measurement requirements and conditions . 20
6.1 General . 20
6.2 Disturbance not produced by the equipment under test . 20
6.2.1 General . 20
6.2.2 Compliance testing . 20
6.3 Measurement of continuous disturbance . 20
6.3.1 Narrowband continuous disturbance . 20
6.3.2 Broadband continuous disturbance . 20
6.3.3 Use of spectrum analyzers and scanning receivers . 21
6.4 EUT arrangement and measurement conditions . 21
6.4.1 EUT arrangement . 21
6.4.2 Normal load conditions . 23
6.4.3 Duration of operation . 23
6.4.4 Running-in/warm-up time . 23
6.4.5 Supply . 24
6.4.6 Mode of operation . 24
6.4.7 Operation of multifunction equipment . 24
6.4.8 Determination of EUT arrangement(s) that maximize(s)
emissions . 24
6.4.9 Recording of measurement results . 24
6.5 Interpretation of measuring results . 24
6.5.1 Continuous disturbance . 24
6.5.2 Discontinuous disturbance . 25
6.5.3 Measurement of the duration of disturbances. 25
6.6 Measurement times and scan rates for continuous disturbance . 25
6.6.1 General . 25
6.6.2 Minimum measurement times . 25
6.6.3 Scan rates for scanning receivers and spectrum analyzers . 26
6.6.4 Scan times for stepping receivers . 27
6.6.5 Strategies for obtaining a spectrum overview using the peak
detector . 28

CISPR 16-2-1:2014 © IEC 2014 – 3 –
6.6.6 Timing considerations using FFT-based instruments . 31
7 Measurement of disturbances conducted along leads, 9 kHz to 30 MHz . 33
7.1 General . 33
7.2 Measuring equipment (receivers, etc.) . 33
7.2.1 General . 33
7.2.2 Use of detectors for conducted disturbance measurements . 33
7.3 Ancillary measuring equipment . 34
7.3.1 General .
...