EN 62841-3-9:2015
(Main)Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws
IEC 62841-3-9:2014 applies to transportable mitre saws intended to be used with a toothed saw blade for cutting wood and analogous materials, plastics and nonferrous metals except magnesium with a saw blade diameter not exceeding 360 mm, which hereinafter might simply be referred to as saw or tool. This standard does not apply to mitre saws intended to cut other metals, such as magnesium, steel and iron. This standard does not apply to mitre saws with an automatic feeding device. This standard does not apply to saws designed for use with abrasive wheels. This standard does not apply to tools combining the function of a mitre saw with the function of a table saw. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication. Key words: Mitre saw, Saw, Saw unit, This publication is to be read in conjunction with IEC 62841-1:2014.
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 3-9: Besondere Anforderungen für transportable Gehrungskappsägen
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 3-9: Exigences particulières pour les scies à onglets transportables
L'IEC 62841-3-9:2014 s'applique aux scies à onglets transportables destinées à être utilisées avec une lame de scie dentée pour la coupe du bois et de matériaux analogues, de plastiques et de métaux non ferreux à l'exception du magnésium, la lame de scie ayant un diamètre ne dépassant pas 360 mm, celle-ci pouvant être simplement désignée ci-après comme scie ou outil. La présente norme ne s'applique pas aux scies à onglets utilisées pour couper d'autres métaux, tels que le magnésium, l'acier et le fer. La présente norme ne s'applique pas aux scies à onglets équipées d'un appareil d'alimentation automatique. L'attention des Comités Nationaux est attirée sur le fait que les fabricants d'appareils et les organismes d'essai peuvent avoir besoin d'une période transitoire après la publication d'une nouvelle publication CEI, ou d'une publication amendée ou révisée, pour fabriquer des produits conformes aux nouvelles exigences et pour adapter leurs équipements aux nouveaux essais ou aux essais révisés. Le comité recommande que le contenu de cette publication soit entériné au niveau national au plus tôt 36 mois après la date de publication. Mots-clés: scie à onglet, scie, outil de coupe Cette publication doit être lue conjointement avec la CEI 62841-1:2014.
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 3-9. del: Posebne zahteve za prenosne zajeralne žage
Standard se uporablja za prenosne zajeralne žage z nazobčanim rezilom za rezanje lesa in podobnih materialov, plastike in barvnih kovin, razen magnezija, katerih premer rezila je manjši od 360 mm in so v nadaljnjem besedilu poimenovane zgolj žaga ali orodje. Ta standard se ne uporablja za zajeralne žage, namenjene rezanju drugih materialov, kot so magnezij, jeklo in železo. Ta standard se ne uporablja za zajeralne žage s samodejnim podajalnikom.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2016
1DGRPHãþD
SIST EN 61029-2-9:2013
SIST EN 61029-2-9:2013/A11:2014
(OHNWURPRWRUQDURþQDRURGMDSUHQRVQDRURGMDWHUVWURML]DWUDWRLQYUW9DUQRVW
GHO 3RVHEQH]DKWHYH]DSUHQRVQH]DMHUDOQHåDJH
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und
Rasen- und Gartenmaschinen -Sicherheit -Teil 3-9: Besondere Anforderungen für
Gehrungskappsägen
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses -
Sécurité -- Partie 3-9: Exigences particulières pour les scies à onglets transportables
Ta slovenski standard je istoveten z: EN 62841-3-9:2015
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 (OHNWULþQDRURGMD Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62841-3-9
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2015
ICS 25.140.20 Supersedes EN 61029-2-9:2012
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 3-9: Particular
requirements for transportable mitre saws
(IEC 62841-3-9:2014 , modified + COR1:2015)
Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,
pour jardins et pelouses - Sécurité - Partie 3-9: Exigences transportable Werkzeuge und Rasen- und
particulières pour les scies à onglets transportables Gartenmaschinen - Sicherheit - Teil 3-9: Besondere
(IEC 62841-3-9:2014 , modifiée + COR1:2015) Anforderungen für Gehrungskappsägen
(IEC 62841-3-9:2014 , modifiziert + COR1:2015)
This European Standard was approved by CENELEC on 2014-07-21. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62841-3-9:2015 E
European foreword
The text of document 116/181/FDIS, future edition 1 of IEC 62841-3-9, prepared by IEC/TC 116 "Safety
of motor-operated electric tools" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62841-3-9:2015.
A draft amendment, which covers common modifications to IEC 62841-3-9:2014, was prepared by
CLC/TC 116 “Safety of motor-operated electric tools” and approved by CENELEC.
The following dates are fixed:
(dop) 2016-06-18
• latest date by which this document has to be implemented
at national level by publication of an identical
national standard or by endorsement
• latest date by which the national standards conflicting (dow) 2019-11-15
with this document have to be withdrawn
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
This European Standard is divided into four parts:
Part 1: General requirements which are common to most electric motor operated tools (for the
purpose of this standard referred to simply as tools) which could come within the scope of
this standard;
Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the
requirements given in Part 1 to account for the particular hazards and characteristics of
these specific tools.
This Part 3-9 is to be used in conjunction with EN 62841-1:2015. This Part 3-9 supplements or modifies
the corresponding clauses in EN 62841-1:2015, so as to convert it into the European Standard: Particular
requirements for transportable mitre saws.
Where a particular subclause of Part 1 is not mentioned in this Part 3-9, that subclause applies as far as
relevant. Where this standard states "addition", "modification" or "replacement", the relevant text in Part 1
is to be adapted accordingly.
Compliance with the clauses of Part 1 together with this Part 3 provides one means of conforming with
the essential health and safety requirements of the Directive concerned.
Warning: Other requirements and other EU Directives can be applicable to the products falling within
the scope of this standard.
This European Standard follows the overall requirements of EN ISO 12100.
The following print types are used:
- requirements; in roman type;
- test specifications: in italic type;
- 3 - EN 62841-3-9:2015
- notes: in small roman type.
The terms defined in Clause 3 are printed in bold typeface.
Subclauses, notes, tables and figures which are additional to those in Part 1 are numbered starting
from 101.
Clauses, subclauses, notes, tables, figures and annexes which are additional to those in
IEC 62841-3-9:2014 are prefixed “Z”.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 62841-3-9:2014 and COR1:2015 was approved by CENELEC
as a European Standard with agreed common modifications.
COMMON MODIFICATIONS
1 Scope
Add after the first paragraph:
This standard applies to mitre saws having a mass of:
– maximum 25 kg for tools capable of being lifted by hand by one person;
– maximum 50 kg for tools capable of being lifted by hand by two persons.
This standard does not apply to stationary mitre saws.
NOTE EN 1870-3 gives requirements for stationary mitre saws and mitre saws with a mass greater than indicated above.
2 Normative references
Add the following normative reference:
EN 847-1, Tools for woodworking - Safety requirements - Part 1: Milling tools, circular saw blades
8 Marking and instructions
8.14.2 a):
Add the following new item:
Z101) Instruction to use only saw blades recommended by the manufacturer, which conform to
EN 847-1, if intended for wood and analogous materials.
21 Construction
Add the following new subclause:
21.101.Z101 The saw blade provided with the tool, if intended for cutting wood and analogous
materials, shall comply with EN 847-1.
Compliance is checked by inspection and by receipt of relevant information from the saw blade
manufacturer.
Replace the title of Annex I by the following:
Annex I
(normative)
Measurement of noise and vibration emissions
- 5 - EN 62841-3-9:2015
Add the following annexes:
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
This annex from Part 1 is applicable with the following addition:
Publication Year Title EN/HD Year
- - Tools for woodworking - Safety EN 847-1 -
requirements
Part 1: Milling tools, circular saw blades
ISO 180 - Plastics - Determination of Izod impact EN ISO 180 -
strength
Annex ZZ
(informative)
Coverage of Essential Requirements of Directive 2006/42/EC
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and within its scope the standard covers all
relevant Essential Requirements as given in EU Directive 2006/42/EC (Machinery Directive).
Compliance with this standard provides one means of conformity with the specified essential
requirements of the Directives concerned.
WARNING: Other requirements and other EU Directives may be applicable to the products falling within
the scope of this standard.
- 7 - EN 62841-3-9:2015
Bibliography
Add the following to the bibliography:
EN 1870-3, Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut
saws and dual purpose down cutting cross-cut saws/circular saw benches
___________
IEC 62841-3-9 ®
Edition 1.0 2014-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Electric motor-operated hand-held tools, transportable tools and lawn and
garden machinery – Safety –
Part 3-9: Particular requirements for transportable mitre saws
Outils électroportatifs à moteur, outils portables et machines pour jardins et
pelouses – Sécurité –
Partie 3-9: Exigences particulières pour les scies à onglets transportables
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX V
ICS 25.140.20 ISBN 978-2-8322-1695-8
– 2 – IEC 62841-3-9:2014 © IEC 2014
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 General requirements . 8
5 General conditions for the tests . 9
6 Radiation, toxicity and similar hazards . 9
7 Classification . 9
8 Marking and instructions . 9
9 Protection against access to live parts . 12
10 Starting . 12
11 Input and current . 12
12 Heating . 12
13 Resistance to heat and fire . 12
14 Moisture resistance . 13
15 Resistance to rusting . 13
16 Overload protection of transformers and associated circuits . 13
17 Endurance . 13
18 Abnormal operation . 13
19 Mechanical hazards . 13
20 Mechanical strength . 18
21 Construction . 19
22 Internal wiring . 23
23 Components .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.