EN 61029-2-9:2012
(Main)Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws
Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws
Applies to transportable mitre saws intended for cutting non ferrous metals such as aluminium, wood and similar materials with a blade diameter not exceeding 400 mm. Tools comibining the function of mitre saw with the function of circular saw are not covered by this standard.
Sicherheit transportabler motorbetriebener Elektrowerkzeuge - Teil 2-9: Besondere Anforderungen für Gehrungskappsägen
Sécurité des machines-outils électriques semi-fixes - Partie 2-9: Règles particulières pour les scies à onglet
S'applique aux scies à onglet semi-fixes, destinées à couper des métaux non ferreux tels que l'aluminium, le bois et des matériaux analogues, et ayant un diamètre de lame maximal de 400 mm. Les machines-outils combinant les fonctions de scie à onglet et de scie circulaire ne sont pas comprises dans le domaine d'application de cette norme.
Varnost premičnih električnih orodij - 2-9. del: Posebne zahteve za zajeralne žage
Ta evropski standard se uporablja za premične zajeralne žage, katerih premer rezila je manjši od 350 mm in so namenjene rezanju lesa in podobnih materialov, plastike ter barvnih kovin, razen magnezija.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2013
9DUQRVWSUHPLþQLKHOHNWULþQLKRURGLM GHO 3RVHEQH]DKWHYH]D]DMHUDOQHåDJH
Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements
for mitre saws
Sicherheit transportabler motorbetriebener Elektrowerkzeuge - Teil 2-9: Besondere
Anforderungen für Gehrungskappsägen
Sécurité des machines-outils électriques semi-fixes - Partie 2-9: Règles particulières
pour les scies à onglet
Ta slovenski standard je istoveten z: EN 61029-2-9:2012
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 (OHNWULþQDRURGMD Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61029-2-9
NORME EUROPÉENNE
October 2012
EUROPÄISCHE NORM
ICS 25.080.60; 25.140.20 Supersedes EN 61029-2-9:2009
English version
Safety of transportable motor-operated electric tools -
Part 2-9: Particular requirements for mitre saws
(IEC 61029-2-9:1995, modified)
Sécurité des machines-outils électriques Sicherheit transportabler motorbetriebener
semi-fixes - Elektrowerkzeuge -
Partie 2-9: Règles particulières pour les Teil 2-9: Besondere Anforderungen für
scies à onglet Gehrungskappsägen
(CEI 61029-2-9:1995, modifiée) (IEC 61029-2-9:1995, modifiziert)
This European Standard was approved by CENELEC on 2012-09-03. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia,
Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands,
Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61029-2-9:2012 E
Contents
Foreword . 4
1 Scope . 6
2 Definitions . 6
3 General requirements . 6
4 General notes on tests . 7
5 Rating . 7
6 Classification . 7
7 Marking and information for use . 7
8 Protection against electric shock . 8
9 Starting . 8
10 Input and current . 8
11 Heating . 8
12 Leakage current . 9
13 Environmental requirements . 9
14 Protection against ingress of foreign bodies and moisture resistance . 9
15 Insulation resistance and electric strength . 9
16 Endurance . 10
17 Abnormal operation. 10
18 Stability and mechanical hazards . 10
19 Mechanical strength . 14
20 Construction . 14
21 Internal wiring . 15
22 Components . 15
23 Supply connection and external flexible cables and cords . 15
24 Terminals for external conductors . 15
25 Provision for earthing . 15
26 Screws and connections . 15
27 Creepage distances, clearances and distances through insulation . 16
28 Resistance to heat, fire and tracking . 16
29 Resistance to rusting . 16
30 Radiation . 16
Annex A (normative) Normative references . 24
Annex ZD (informative) Dust measurement . 25
Annex ZZ (informative) Coverage of Essential Requirements of Directive 2006/42/EC . 27
– 3 – EN 61029-2-9:2012
Figures
Figure Z101 – Saw blade areas . 17
Figure Z102 – Mitre saw provided with U-shaped guard . 18
Figure Z103 – Mitre saw provided with open guard construction . 18
Figure Z104 – Open guard construction . 19
Figure Z105 – Dimensions of test probe . 19
Figure Z106 – Dimension of the slot in the table . 20
Figure Z107 – Flange characteristics . 20
Figure Z108 – Position of saw blade relative to saw table . 21
Figure Z109 – Distance between fence and saw blade . 22
Figure Z110 – Mitre saw with workpiece support . 23
Figure ZD.101 – Orientation of tool and operator . 26
Tables
Table Z101 – Test conditions for mitre saws . 9
Table ZD.101 – Conditions for dust measurements . 25
Foreword
This document (EN 61029-2-9:2012) consists of the text of IEC 61029-2-9:1995 prepared by
IEC/SC 61F (transformed into IEC TC 116 "Safety of hand-held motor-operated electric tools"),
together with the common modifications prepared by CLC/TC 116 "Safety of motor-operated electric
tools".
The following dates are fixed:
• latest date by which the document has to be
(dop) 2013-09-03
implemented at national level
by publication of an identical
national standard or by endorsement
• latest date by which the national standards conflicting
(dow) 2015-09-03
with the document have to be withdrawn
This document supersedes EN 61029-2-9:2009.
EN 61029-2-9:2009:
– rewording of some clauses and
– improvement and clarification of Clause 18.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This European Standard is divided into two parts:
Part 1 General requirements, which are common to most transportable motor, operated tools (for the
purpose of this European Standard referred to simply as tools) which could come within the
scope of this European Standard.
Part 2 Requirements for particular types of tool which either supplement or modify the requirements
given in Part 1 to account for the particular hazards and characteristics of these specific tools.
Compliance with the relevant clauses of Part 1 together with this Part 2 provides one means of
conforming to the specified essential health and safety requirements of the Directive.
This European Standard follows the overall requirements of EN ISO 12100.
For noise and vibration, this European Standard covers the requirements for their measurement, the
provisions of information arising from these measurements and the provision of information about the
personal protective equipment required. Specific requirements for the reduction of the risk arising from
noise and vibration through the design of the tool are not given as this reflects the current state of the
art.
Warning: Other requirements arising from other EU Directives can be applicable to the products
falling within the scope of this European Standard.
CEN have prepared standards for wood working machines, which may include transportable
machines. Although CEN and CENELEC have, where appropriate, used common solutions to provide
uniform levels of protection, persons using this European Standard should check the scope of both this
and CEN standards to ensure that a correct standard is used. Where necessary, normative reference
is made to these standards in this Part 2.
– 5 – EN 61029-2-9:2012
This Part 2-9 is to be used in conjunction with EN 61029-1:2009. This Part 2-9 supplements or
modifies the corresponding clauses of EN 61029-1, so as to convert it into the European Standard:
“Safety requirements for transportable mitre saws”.
Where a particular subclause of Part 1 is not mentioned in this Part 2-9, that subclause applies as far
as is reasonable. Where this Part 2-9 states "addition", "modification" or "replacement", the relevant
text of Part 1 is to be adapted accordingly.
Clauses, subclauses, notes, tables and figures which are additional to those in Part 1 are numbered
starting from 101.
Clauses, subclauses, notes, tables and figures which are additional to those in IEC 61029-2-9 are
prefixed “Z”.
NOTE In this European Standard, the following print types are used:
- requirements proper: in roman type;
- test specifications: in italic type;
- explanatory matter: in smaller roman type.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive.
For the relationship with EU Directive 2006/42/EC, see informative Annex ZZ, which is an integral part
of this document.
Endorsement notice
The text of the International Standard IEC 61029-2-9:1995 was approved by CENELEC as a European
Standard with agreed common modifications.
1 Scope
This clause of Part 1 is applicable except as follows:
1.1 Addition:
This European Standard applies to transportable mitre saws with a saw blade diameter not exceeding
350 mm, intended for cutting wood and analogous materials, plastics and non-ferrous metals except
magnesium.
1.2 Addition:
This European Standard does not apply to transportable mitre saws used to cut ferrous metal or
magnesium.
This standard does not apply to mitre saws other than transportable.
NOTE 1 EN 1870-3 gives requirements for mitre saws for cutting wood other than transportable.
This standard does not apply to tools combining the function of a mitre saw with the function of a
circular saw bench.
NOTE 2 Transportable tools combining the function of a mitre saw with the function of a circular saw bench are covered by
EN 61029-2-11.
2 Definitions
This clause of Part 1 is applicable except as follows:
2.21 Replacement:
2.21
normal load
load to obtain rated input
2.101
mitre saw
saw consisting of a table which supports and positions the workpiece and a saw unit fitted to an arm
which projects over
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.