EN 62282-5-1:2007
(Main)Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
Covers construction, marking and test requirements for a.c. and d.c. type portable fuel cell systems. These fuel cell systems are movable and not fastened or otherwise secured to a specific location. The purpose of a portable fuel cell system is to produce useable power.
Brennstoffzellentechnologien - Teil 5-1: Portable Brennstoffzellen-Energiesysteme - Sicherheit
Technologies des piles à combustible - Partie 5-1: Systèmes à piles à combustible portables - Sécurité
Couvre les exigences de construction, de marquage et d'essai des systèmes à piles à combustible portables à courant alternatif et à courant continu. Ces systèmes à pile à combustible sont mobiles et ne sont ni attachés ni fixés par un autre moyen à un emplacement spécifique. Un système à pile à combustible est destiné à produire une puissance utile.
Tehnologija gorivnih celic - 5. del: Naprave s prenosnimi gorivnimi celicami - Varnost (IEC 62282-5-1:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62282-5-1:2008
01-januar-2008
Tehnologija gorivnih celic - 5. del: Naprave s prenosnimi gorivnimi celicami -
Varnost (IEC 62282-5-1:2007)
Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
Brennstoffzellentechnologien - Teil 5-1: Portable Brennstoffzellen-Energiesysteme -
Sicherheit
Technologies des piles a combustible - Partie 5-1: Systemes a piles a combustible
portables - Sécurité
Ta slovenski standard je istoveten z: EN 62282-5-1:2007
ICS:
27.070 Gorilne celice Fuel cells
SIST EN 62282-5-1:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 62282-5-1
NORME EUROPÉENNE
June 2007
EUROPÄISCHE NORM
ICS 27.070
English version
Fuel cell technologies -
Part 5-1: Portable fuel cell power systems -
Safety
(IEC 62282-5-1:2007)
Technologies des piles à combustible - Brennstoffzellentechnologien -
Partie 5-1: Systèmes à piles Teil 5-1: Portable Brennstoffzellen-
à combustible portables - Energiesysteme -
Sécurité Sicherheit
(CEI 62282-5-1:2007) (IEC 62282-5-1:2007)
This European Standard was approved by CENELEC on 2007-06-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62282-5-1:2007 E
---------------------- Page: 2 ----------------------
EN 62282-5-1:2007 - 2 -
Foreword
The text of document 105/135/FDIS, future edition 1 of IEC 62282-5-1, prepared by IEC TC 105, Fuel cell
technologies, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 62282-5-1 on 2007-06-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-06-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62282-5-1:2007 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 62282-5-1:2007
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60034 Series Rotating electrical machines EN 60034 Series
1) 2)
IEC 60068-2-75 - Environmental testing - EN 60068-2-75 1997
Part 2-75: Tests - Test Eh: Hammer tests
1) 2)
IEC 60079-10 - Electrical apparatus for explosive gas EN 60079-10 2003
atmospheres -
Part 10: Classification of hazardous areas
1) 2)
IEC 60079-15 - Electrical apparatus for explosive gas EN 60079-15 2005
atmospheres -
Part 15: Construction, test and marking of
type of protection "n" electrical apparatus
1)
IEC/TR 60079-20 - Electrical apparatus for explosive gas -
-
atmospheres -
Part 20: Data for flammable gases and
vapours, relating to the use of electrical
apparatus
1) 2)
IEC 60204-1 - Safety of machinery - Electrical equipment EN 60204-1 2006
(mod) of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.