EN 61753-121-2:2010
(Main)Fibre optic interconnecting devices and passive components - Performance standards - Part 121-2: Simplex and duplex cords with singlemode fibre and cylindrical ferrule connectors for category C - Controlled environment
Fibre optic interconnecting devices and passive components - Performance standards - Part 121-2: Simplex and duplex cords with singlemode fibre and cylindrical ferrule connectors for category C - Controlled environment
IEC 61753-121-2:2010(E) specifies the test requirements for finished cable assemblies for use as patchcords, work area cords and equipment cords for applications in a controlled (C) environment according to IEC 61753-1, where the connectors already comply, with the Category C requirements of IEC 61753-1. The assemblies consist of simplex or duplex fibre optic cable terminated at each end of the cable with non-angled (PC) or angled (APC) polished single-mode fibre optic connectors with cylindrical ferrules. The wavelength of operation is between 1 260 nm and 1 625 nm.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 121-2: Simplex- und Duplexkabel mit Einmoden-Lichtwellenleiter-Steckverbindern mit zylindrischen Ferrulen für die Kategorie C - Kontrollierte Umgebung
Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de qualité de fonctionnement - Partie 121-2: Cordons simplex et duplex avec fibres unimodales, munis de connecteurs à férule cylindrique pour catégorie C - Environnement contrôlé
La CEI 61753-121-2:2010 spécifie les exigences relatives aux essais appliqués aux cordons finis utilisés en tant que cordons de brassage, cordons de zone de travail et cordons d'équipement, en vue d'applications dans un environnement contrôlé (C) conformément à la CEI 61753-1, là où les connecteurs sont déjà conformes, conjointement avec les exigences de la catégorie C de la CEI 61753-1. Les ensembles sont constitués de câbles à fibres optiques simplex ou duplex munis à chaque extrémité du câble de connecteurs à fibres optiques unimodales polies sans angle (PC) ou à angle (APC), comportant des férules cylindriques. La longueur d'onde de fonctionnement est comprise entre 1 260 nm et 1 625 nm.
Tehnični standardi za optične spojne elemente in pasivne komponente - 121-2. del: Simpleksne in dupleksne vrvice z enorodnim optičnim vlaknom ter cilindričnimi tulčastimi konektorji za kategorijo C - Nadzorovano okolje (IEC 61753-121-2:2010)
Ta del IEC 61753 določa preskusne zahteve za dokončane kabelske sestave, ki se uporabljajo kot priključni kabli, vrvice na delovnih območjih in vrvice na opremi v nadzorovanem (C) okolju v skladu z IEC 61753-1, pri čemer so konektorji že v skladu z zahtevami kategorije C IEC 61753-1. Sestavi so sestavljeni iz simpleksnega ali dupleksnega optičnega kabla, ki se na vsakem koncu konča s poliranimi enorodnimi optičnimi konektorji, ki se stikajo pod pravim kotom (PC) ali pod kotom (APC), s cilindričnimi spojkami. Valovna dolžina obratovanja je med 1.260 nm 1 in 1.625 nm. Ustrezne zahteve za sisteme za mehansko in optično povezljivost so zajete v standardih za mehanske in optične vmesnike serije IEC 61754 oziroma serije IEC 61755. Ustrezne zahteve za konektorske sestave so zajete v seriji IEC 61753. Ustrezne zahteve za kable so zajete v IEC 60794-2-50.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61753-121-2:2010
01-september-2010
7HKQLþQLVWDQGDUGL]DRSWLþQHVSRMQHHOHPHQWHLQSDVLYQHNRPSRQHQWHGHO
6LPSOHNVQHLQGXSOHNVQHYUYLFH]HQRURGQLPRSWLþQLPYODNQRPWHUFLOLQGULþQLPL
WXOþDVWLPLNRQHNWRUML]DNDWHJRULMR&1DG]RURYDQRRNROMH ,(&
Fibre optic interconnecting devices and passive components performance standards -
Part 121-2: Simplex and duplex cords with singlemode fibre and cylindrical ferrule
connectors for Category C - Controlled environment (IEC 61753-121-2:2010)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
121-2: Simplex- und Duplexkabel mit zylindrischen Einmoden-Lichtwellenleiter-
Stiftsteckverbindern für die Kategorie C - Kontrollierte Umgebung (IEC 61753-121-
2:2010
Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de qualité
de fonctionnement - Partie 121-2: Cordons simplex et duplex avec fibres unimodales,
munis de connecteurs à férule cylindrique pour catégorie C - Environnement contrôlé
(CEI 61753-121-2:2010
Ta slovenski standard je istoveten z: EN 61753-121-2:2010
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61753-121-2:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61753-121-2:2010
---------------------- Page: 2 ----------------------
SIST EN 61753-121-2:2010
EUROPEAN STANDARD
EN 61753-121-2
NORME EUROPÉENNE
July 2010
EUROPÄISCHE NORM
ICS 33.180.20
English version
Fibre optic interconnecting devices and passive components -
Performance standards -
Part 121-2: Simplex and duplex cords with singlemode fibre
and cylindrical ferrule connectors for category C -
Controlled environment
(IEC 61753-121-2:2010)
Dispositifs d'interconnexion et composants Lichtwellenleiter -
passifs à fibres optiques - Verbindungselemente und passive
Norme de qualité de fonctionnement - Bauteile -
Partie 121-2: Cordons simplex et duplex Betriebsverhalten -
avec fibres unimodales, munis Teil 121-2: Simplex- und Duplexkabel
de connecteurs à férule cylindrique mit Einmoden-Lichtwellenleiter-
pour catégorie C - Steckverbindern mit zylindrischen
Environnement contrôlé Ferrulen für die Kategorie C -
(CEI 61753-121-2:2010) Kontrollierte Umgebung
(IEC 61753-121-2:2010)
This European Standard was approved by CENELEC on 2010-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-121-2:2010 E
---------------------- Page: 3 ----------------------
SIST EN 61753-121-2:2010
EN 61753-121-2:2010 - 2 -
Foreword
The text of document 86B/2988/FDIS, future edition 1 of IEC 61753-121-2, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-121-2 on 2010-07-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-04-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-07-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text o
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.