EN 60893-3-3:2004/A1:2012

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins

Gives the requirements for industrial rigid laminated sheets for electrical purposes based on melamine resins and different reinforcements. Applications and distinguishing properties are given. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. In this revision of the IEC 60893 series of specifications, new material types have been included, changes have been made to the property requirements of some existing types, a new method for testing permittivity and dissipation factor has been added, and all non-specification data for each type has been moved to a new Part 4 document - IEC 60893-4 - Typical values.

Isolierstoffe - Tafeln aus technischen Schichtpressstoffen auf der Basis warmhärtender Harze für elektrotechnische Zwecke - Teil 3-3: Bestimmungen für einzelne Werkstoffe - Anforderungen für Tafeln aus Schichtpressstoffen auf der Basis von Melaminharzen

Matériaux isolants - Stratifiés industriels rigides en planches à base de résines thermodurcissables à usages électriques - Partie 3-3: Spécifications pour matériaux particuliers - Prescriptions pour stratifiés rigides en planches à base de résine mélamine

Izolacijski materiali - Industrijske toge laminirane plošče iz smol s toplotnim utrjevanjem za električne namene - 3-3. del: Specifikacije za posamezne materiale - Zahteve za toge laminirane plošče na osnovi melaminskih smol

V njem so navedene zahteve za industrijske toge laminirane plošče na osnovi melaninskih smol in različnih ojačitev za električne namene. Navedene so vrste uporab in razlikovalne lastnosti. Materiali, ki so skladni s to specifikacijo, ustrezajo določenim ravnem učinkovitosti. Vendar mora uporabnik material za specifično uporabo izbrati glede na dejanske zahteve za zadostno učinkovitost pri tej uporabi, ne samo na podlagi te specifikacije. V tej različici specifikacij skupine standardov IEC 60893 so zajeti novi tipi materialov, spremenjene so zahteve glede lastnosti nekaterih obstoječih tipov, dodana sta nova metoda za preskušanje permitivnosti in faktor odvajanja, vsi podatki glede posameznih tipov, ki niso povezani s specifikacijami, pa so prestavljeni v nov, 4. del dokumenta IEC 60893-4 – Običajne vrednosti.

General Information

• Status: Published
• Publication Date: 28-Jun-2012
• Withdrawal Date: 01-Jan-2015
• ICS: 29.035.01 - Insulating materials in general
• Technical Committee: CLC/SR 15 - Insulating materials
• Drafting Committee: IEC/TC 15 - IEC_TC_15
• Parallel Committee: IEC/TC 15 - IEC_TC_15
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 29-Jun-2012
• Completion Date: 29-Jun-2012
• Ref Project: SIST EN 60893-3-3:2004/A1:2012 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins

Relations

• Amends: EN 60893-3-3:2004 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60893-3-3:2004/A1:2012
01-september-2012
,]RODFLMVNLPDWHULDOL,QGXVWULMVNHWRJHODPLQLUDQHSORãþHL]VPROVWRSORWQLP
XWUMHYDQMHP]DHOHNWULþQHQDPHQHGHO6SHFLILNDFLMH]DSRVDPH]QHPDWHULDOH
=DKWHYH]DWRJHODPLQLUDQHSORãþHQDRVQRYLPHODPLQVNLKVPRO
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for
electrical purposes - Part 3-3: Specifications for individual materials - Requirements for
rigid laminated sheets based on melamine resins
Isolierstoffe - Tafeln aus technischen Schichtpressstoffen auf der Basis warmhärtender
Harze für elektrotechnische Zwecke - Teil 3-3: Bestimmungen für einzelne Werkstoffe -
Anforderungen für Tafeln aus Schichtpressstoffen auf der Basis von Melaminharzen
Matériaux isolants - Stratifiés industriels rigides en planches à base de résines
thermodurcissables à usages électriques - Partie 3-3: Spécifications pour matériaux
particuliers - Prescriptions pour stratifiés rigides en planches à base de résine mélamine
Ta slovenski standard je istoveten z: EN 60893-3-3:2004/A1:2012
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
SIST EN 60893-3-3:2004/A1:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60893-3-3/A1

NORME EUROPÉENNE
June 2012
EUROPÄISCHE NORM

ICS 29.035.01


English version


Insulating materials -
Industrial rigid laminated sheets based on thermosetting
resins for electrical purposes -
Part 3-3: Specifications for individual materials -
Requirements for rigid laminated sheets based on melamine resins
(IEC 60893-3-3:2003/A1:2011)

Matériaux isolants -  Isolierstoffe - Tafeln aus technischen
Stratifiés industriels rigides en planches Schichtpressstoffen auf der Basis
à base de résines thermodurcissables warmhärtender Harze für
à usages électriques - elektrotechnische Zwecke -
Partie 3-3: Spécifications pour matériaux Teil 3-3: Bestimmungen für einzelne
particuliers - Werkstoffe - Anforderungen für Tafeln
Prescriptions pour stratifiés rigides en aus Schichtpressstoffen auf der Basis von
planches à base de résine mélamine Melaminharzen
(CEI 60893-3-3:2003/A1:2011) (IEC 60893-3-3:2003/A1:2011)


This amendment A1 modifies the European Standard EN 60893-3-3:2004; it was approved by CENELEC on
2012-01-02. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60893-3-3:2004/A1:2012 E

---------------------- Page: 2 ----------------------

EN 60893-3-3:2004/A1:2012 - 2 -
Foreword
The text of document 15/489/CDV, future amendment 1 to edition 2 of IEC 60893-3-3:2003/A1:2011,
prepared by IEC/TC 15 "Solid electrical insulating materials" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 60893-3-3:2004/A1:2012.
The following dates are fixed:
(dop) 2012-12-29
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-01-02
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60893-3-3:2003/A1:2011 was approved by CENELEC as a
European Standard wit
...