EN 61300-2-23:2011

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests - Sealing for non-pressurized closures of fibre optic devices

IEC 61300-2-23:2010 evaluates the effectiveness of the sealing of non-pressurized closures when subjecting to immersion in water. Changes from the previous edition of the document are to reconsider the procedure and severity.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-23: Prüfungen - Dichtheit druckloser Muffen für Lichtwellenleiter-Bauteile

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-23: Essais - Etanchéité pour les boîtiers non pressurisés de dispositifs à fibres optiques

La CEI 61300-2-23:2010 évalue l'efficacité de l'étanchéité des boîtiers non pressurisés lorsqu'ils sont soumis à une immersion dans l'eau. Les modifications par rapport à l'édition précédente du document ont pour but de reconsidérer la procédure et la sévérité.",PE

Optični spojni elementi in pasivne komponente - Osnovni postopki za preskušanje in meritve - 2-23. del: Preskusi - Tesnjenje breztlačnih ohišij optičnih elementov (IEC 61300-2-23:2010)

Ta del IEC 61300 vrednoti učinkovitost tesnjenja breztlačnih ohišij pri potopitvi v vodo.

General Information

• Status: Published
• Publication Date: 03-Mar-2011
• Withdrawal Date: 31-Jan-2012
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 04-Mar-2011
• Completion Date: 04-Mar-2011
• Ref Project: SIST EN 61300-2-23:2011 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests - Sealing for non-pressurized closures of fibre optic devices (IEC 61300-2-23:2010)

Relations

• Replaces: EN 61300-2-23:1997 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests - Sealing for non-pressurized closures of fibre optic devices
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-2-23:2011
01-maj-2011
1DGRPHãþD
SIST EN 61300-2-23:1999
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2VQRYQLSRVWRSNL]DSUHVNXãDQMH
LQPHULWYHGHO3UHVNXVL7HVQMHQMHEUH]WODþQLKRKLãLMRSWLþQLKHOHPHQWRY
,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-23: Tests - Sealing for non-pressurized closures of
fibre optic devices (IEC 61300-2-23:2010)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-23: Prüfungen - Dichtheit druckloser Muffen für Lichtwellenleiter-
Bauteile (IEC 61300-2-23:2010)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 2-23: Essais - Etanchéité pour les boîtiers
non pressurisés de dispositifs à fibres optiques (CEI 61300-2-23:2010)
Ta slovenski standard je istoveten z: EN 61300-2-23:2011
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-2-23:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61300-2-23:2011

---------------------- Page: 2 ----------------------

SIST EN 61300-2-23:2011

EUROPEAN STANDARD
EN 61300-2-23

NORME EUROPÉENNE
March 2011
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61300-2-23:1997


English version


Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 2-23: Tests -
Sealing for non-pressurized closures of fibre optic devices
(IEC 61300-2-23:2010)


Dispositifs d'interconnexion et composants Lichtwellenleiter -
passifs à fibres optiques - Verbindungselemente und passive
Méthodes fondamentales d'essais et de Bauteile -
mesures - Grundlegende Prüf- und Messverfahren -
Partie 2-23: Essais - Teil 2-23: Prüfungen -
Etanchéité pour les boîtiers non Dichtheit druckloser Muffen für
pressurisés de dispositifs à fibres optiques Lichtwellenleiter-Bauteile
(CEI 61300-2-23:2010) (IEC 61300-2-23:2010)




This European Standard was approved by CENELEC on 2011-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-23:2011 E

---------------------- Page: 3 ----------------------

SIST EN 61300-2-23:2011
EN 61300-2-23:2011 - 2 -
Foreword
The text of document 86B/3088/FDIS, future edition 2 of IEC 61300-2-23, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-23 on 2011-02-01.
This European Standard supersedes EN 61300-2-23:1997.
Changes from EN 61300-2-23:1997 are to reconsider the procedure and severity.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-2-23:2010 was approved by CENELEC as a European
Standard without any modification.
In the off
...