Fibre optic interconnecting devices and passive components - Performance standard - Part 111-08: Sealed closures for Category G - Ground

IEC 61752-111-08:2021 contains the minimum tests, test severities and measurement requirements which a sealed fibre optic closure need to meet in order to be categorised as meeting the IEC standard for category G - Ground, as defined in Table A.14 of IEC 61753-1:2018. Free breathing closures are not covered in this document. This first edition cancels and replaces IEC 61753-111-8 published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 61753-111-8: a) terms and definitions updated according to IEC 61753-1:2018 and IEC 61756-1:2019; b) test severities updated according to IEC 61753-1:2018; c) sealing tests are done with 20 kPa overpressure; d) pass-fail criterion of pressure loss during test added to mechanical sealing tests; e) vibration sealing test changed to 10 Hz, 3 mm amplitude and 1 000 000 cycles; f) reduced loads added in cable retention test for small diameter cables and tubes; g) reduced loads for cable axial compression test for small diameter cables; h) the duration of the cycles in torsion and bending test is added; i) free fall test removed (is covered by the optical shock test); j) crush resistance test of 1 000 N for 10 min is added; k) assembly and disassembly test: duration reduced to 5 cycles; l) resistance to solvents and contaminating fluids: added immersion in diesel with duration of 1 h and 24 h drying time and added immersion in petroleum jelly for 5 days; m) resistance to stress cracking solvents added for 5 days; n) duration of the change of temperature reduced to 12 cycles; o) water immersion test at 1 m for 7 days added.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 111-08: Druckdichte Muffen für die Kategorie G - Bodenumgebung

Dispositifs d'interconnexion et composants passifs fibroniques - Norme de performance - Partie 111-08: Boîtiers scellés pour catégorie G - Au niveau du sol

IEC 61753-111-08: 2021 contient les essais, les sévérités d’essai et les exigences de mesure minimaux auxquels un boîtier fibronique scellé est tenu de satisfaire afin d’être classé comme conforme aux exigences de la norme IEC pour la catégorie G – au niveau du sol, telle qu’elle est définie dans le Tableau A.14 de l’IEC 61753‑1:2018. Les boîtiers à ventilation libre ne sont pas couverts par le présent document. Cette première édition annule et remplace l’IEC 61753-111-8 parue en 2009. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’IEC 61753‑111‑8: a) mise à jour des termes et définitions conformément à l’IEC 61753-1:2018 et à l’IEC 61756‑1:2019; b) mise à jour des sévérités d’essai conformément à l’IEC 61753-1:2018; c) réalisation des essais de performance d’étanchéité avec une surpression de 20 kPa; d) ajout aux essais de performance d’étanchéité sur contrainte mécanique du critère d’acceptation/de rejet relatif à une perte de pression au cours de l’essai; e) modification de l’essai de vibrations pour la performance d’étanchéité, défini sur une fréquence de 10 Hz, une amplitude de 3 mm et 1 000 000 cycles; f) ajout de charges réduites à l’essai de rétention du câble, pour les câbles et tubes de faible diamètre; g) charges réduites pour l’essai de compression axiale du câble, pour les câbles de faible diamètre; h) ajout de la durée des cycles dans l’essai de torsion et de courbure; i) suppression de l’essai de chute libre (couvert par l’essai aux chocs optiques); j) ajout de l’essai de résistance à l’écrasement de 1 000 N pendant 10 min; k) réduction à 5 cycles de la durée de l’essai de montage et démontage; l) pour la résistance aux solvants et aux fluides contaminants, ajout d’une immersion dans du gazole pendant 1 h avec un temps de séchage de 24 h, et ajout d’une immersion dans du pétrolatum pendant 5 jours; m) ajout de la résistance aux solvants exerçant une fissuration sous contrainte pendant 5 jours; n) réduction à 12 cycles de la durée des variations de température; o) ajout de l’essai d’immersion dans l’eau à 1 m pendant 7 jours.

Optični spojni elementi in pasivne komponente - Izvedbeni standard - 111-8. del: Zatesnjene spojnice za kategorijo G (Ground) - Talna uporaba (IEC 61753-111-08:2021)

General Information

Status
Published
Publication Date
20-May-2021
Current Stage
6060 - Document made available - Publishing
Start Date
21-May-2021
Completion Date
21-May-2021

Relations

Buy Standard

Standard
EN IEC 61753-111-8:2021 - BARVE
English language
34 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61753-111-8:2021
01-julij-2021
Nadomešča:
SIST EN 61753-111-8:2010
Optični spojni elementi in pasivne komponente - Izvedbeni standard - 111-8. del:
Zatesnjene spojnice za kategorijo G (Ground) - Talna uporaba (IEC 61753-111-
08:2021)
Fibre optic interconnecting devices and passive components - Performance standard -
Part 111-8: Sealed closures for Category G - Ground (IEC 61753-111-08:2021)
Lichtwellenleiter – Verbindungselemente und passive Bauteile – Betriebsverhalten – Teil
111-8: Druckdichte Muffen für die Kategorie G – Bodenverlegung (IEC 61753-111-
08:2021)
Dispositifs d'interconnexion et composants passifs fibroniques - Norme de performance -
Partie 111-8: Boîtiers scellés pour catégorie G - Au niveau du sol (IEC 61753-111-
08:2021)
Ta slovenski standard je istoveten z: EN IEC 61753-111-08:2021
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 61753-111-8:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61753-111-8:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 61753-111-8:2021


EUROPEAN STANDARD EN IEC 61753-111-08

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2021
ICS 33.180.20 Supersedes EN 61753-111-8:2010 and all of its
amendments and corrigenda (if any)
English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 111-08: Sealed closures for
Category G - Ground
(IEC 61753-111-08:2021)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Norme de performance - Partie 111-8: Boîtiers Bauteile - Betriebsverhalten - Teil 111-08: Druckdichte
scellés pour catégorie G - Au niveau du sol Muffen für die Kategorie G - Bodenumgebung
(IEC 61753-111-08:2021) (IEC 61753-111-08:2021)
This European Standard was approved by CENELEC on 2021-05-12. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61753-111-08:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61753-111-8:2021
EN IEC 61753-111-08:2021 (E)
European foreword
The text of document 86B/4426/FDIS, future edition 1 of IEC 61753-111-08, prepared by SC 86B
"Fibre optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61753-111-
08:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-02-12
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-05-12
document have to be withdrawn
This document supersedes EN 61753-111-8:2010 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61753-111-08:2021 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60068-1 NOTE Harmonized as EN 60068-1
IEC 60721-3-1 NOTE Harmonized as EN IEC 60721-3-1
IEC 60721-3-2 NOTE Harmonized as EN IEC 60721-3
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.