EN 60061-2:1993/A32:2005
(Amendment)Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
Subscribe to IEC 60061 Database to access the full and updated content of the series.
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit - Teil 2: Lampenfassungen
Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité - Partie 2: Douilles
Subscribe to IEC 60061 Database to access the full and updated content of the series.
Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo medsebojne zamenljivosti in varnosti – 2. del: Okovi žarnic in sijalk (IEC 60061-2:1969/A32:2004)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60061-
2:1999/A32:2005
STANDARD
junij 2005
Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo medsebojne
zamenljivosti in varnosti – 2. del: Okovi žarnic in sijalk (IEC 60061-
2:1969/A32:2004)
Lamp caps and holders together with gauges for the control of interchangeability
and safety - Part 2: Lampholders (IEC 60061-2:1969/A32:2004)
ICS 29.140.10 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD EN 60061-2/A32
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2005
ICS 29.140.10
English version
Lamp caps and holders together with gauges
for the control of interchangeability and safety
Part 2: Lampholders
(IEC 60061-2:1969/A32:2004)
Culots de lampes et douilles Lampensockel und -fassungen
ainsi que calibres pour le contrôle sowie Lehren zur Kontrolle
de l'interchangeabilité et de la sécurité der Austauschbarkeit und Sicherheit
Partie 2: Douilles Teil 2: Lampenfassungen
(CEI 60061-2:1969/A32:2004) (IEC 60061-2:1969/A32:2004)
This amendment A32 modifies the European Standard EN 60061-2:1993; it was approved by CENELEC
on 2004-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the re
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.