EN 60838-2-3:2017/A1:2023
(Amendment)Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps
Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps
Sonderfassungen - Teil 2-3: Besondere Anforderungen - Lampenfassungen für zweiseitig gesockelte röhrenförmige LED-Lampen
Douilles diverses pour lampes - Partie 2-3: Exigences particulières - Douilles pour lampes LED linéaires à deux culots
Različni okovi žarnic in sijalk - 2-3. del: Posebne zahteve - Okovi za linearne module LED z dvema vznožkoma - Dopolnilo A1 (IEC 60838-2-3:2016/AMD1:2023)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2023
Različni okovi žarnic in sijalk - 2-3. del: Posebne zahteve - Okovi za linearne
module LED z dvema vznožkoma - Dopolnilo A1 (IEC 60838-2-3:2016/AMD1:2023)
Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-
capped linear LED lamps (IEC 60838-2-3:2016/AMD1:2023)
Sonderfassungen - Teil 2-3: Besondere Anforderungen - Lampenfassungen für
zweiseitig gesockelte röhrenförmige LED-Lampen (IEC 60838-2-3:2016/AMD1:2023)
Douilles diverses pour lampes - Partie 2-3: Exigences particulières - Douilles pour
lampes LED linéaires à deux culots (IEC 60838-2-3:2016/AMD1:2023)
Ta slovenski standard je istoveten z: EN 60838-2-3:2017/A1:2023
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60838-2-3:2017/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2023
ICS 29.140.10
English Version
Miscellaneous lampholders - Part 2-3: Particular requirements -
Lampholders for double-capped linear LED lamps
(IEC 60838-2-3:2016/AMD1:2023)
Douilles diverses pour lampes - Partie 2-3: Exigences Sonderfassungen - Teil 2-3: Besondere Anforderungen -
particulières - Douilles pour lampes LED linéaires à deux Lampenfassungen für zweiseitig gesockelte röhrenförmige
culots LED-Lampen
(IEC 60838-2-3:2016/AMD1:2023) (IEC 60838-2-3:2016/AMD1:2023)
This amendment A1 modifies the European Standard EN 60838-2-3:2017; it was approved by CENELEC on 2023-05-29. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60838-2-3:2017/A1:2023 E
European foreword
The text of document 34B/2150/CDV, future IEC 60838-2-3/AMD1, prepared by SC 34B "Lamp caps
and holders" of IEC/TC 34 "Lighting" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN 60838-2-3:2017/A1:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-02-29
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-05-29
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60838-2-3:2016/AMD1:2023 was approved by CENELEC
as a European Standard without any modification.
IEC 60838-2-3 ®
Edition 1.0 2023-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Miscellaneous lampholders –
Part 2-3: Particular requirements – Lampholders for double-capped linear LED
lamps
Douilles diverses pour lampes –
Partie 2-3: Exigences particulières – Douilles pour lampes LED linéaires à deux
culots
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.10 ISBN 978-2-8322-6859-9
– 2 – IEC 60838-2-3:2016/AMD1:2023
© IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MISCELLANEOUS LAMPHOLDERS –
Part 2-3: Particular requirements –
Lampholders for double-capped linear LED lamps
AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to IEC 60838-2-3:2016 has been prepared
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.