iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 61340-2-3:2016/AC:2023-08

(Corrigendum)

Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation

Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation

Elektrostatik - Teil 2-3: Prüfverfahren zur Bestimmung des Widerstandes und des spezifischen Widerstandes von festen Werkstoffen, die zur Vermeidung elektrostatischer Aufladung verwendet werden

Électrostatique - Partie 2-3: Méthodes d'essais pour la détermination de la résistance et de la résistivité des matériaux solides destinés à éviter les charges électrostatiques

Elektrostatika - 2-3. del: Preskusne metode za ugotavljanje upora in upornosti trdnih snovi, uporabljanih za preprečevanje akumulacije elektrostatičnega naboja - Popravek AC (IEC 61340-2-3:2016/COR1:2023)

General Information

Status
Published
Publication Date
03-Aug-2023
ICS
17.220.99 - Other standards related to electricity and magnetism
29.020 - Electrical engineering in general
Technical Committee
CLC/SR 101 - Electrostatics
Current Stage
6060 - Document made available - Publishing
Start Date
04-Aug-2023
Completion Date
04-Aug-2023
Ref Project
SIST EN 61340-2-3:2016/AC:2023 - Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation (IEC 61340-2-3:2016/COR1:2023)

Relations

Corrects
EN 61340-2-3:2016 - Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation
Effective Date
08-Aug-2023

Buy Standard

EN 61340-2-3:2016/AC:2023EN 61340-2-3:2016/AC:2023
PreviousNext
Corrigendum
EN 61340-2-3:2016/AC:2023
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-oktober-2023
Elektrostatika - 2-3. del: Preskusne metode za ugotavljanje upora in upornosti
trdnih snovi, uporabljanih za preprečevanje akumulacije elektrostatičnega naboja -
Popravek AC (IEC 61340-2-3:2016/COR1:2023)
Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of
solid materials used to avoid electrostatic charge accumulation (IEC 61340-2-
3:2016/COR1:2023)
Elektrostatik - Teil 2-3: Prüfverfahren zur Bestimmung des Widerstandes und des
spezifischen Widerstandes von festen Werkstoffen, die zur Vermeidung elektrostatischer
Aufladung verwendet werden (IEC 61340-2-3:2016/COR1:2023)
Électrostatique - Partie 2-3: Méthodes d'essais pour la détermination de la résistance et
de la résistivité des matériaux solides destinés à éviter les charges électrostatiques (IEC
61340-2-3:2016/COR1:2023)
Ta slovenski standard je istoveten z: EN 61340-2-3:2016/AC:2023-08
ICS:
17.220.99 Drugi standardi v zvezi z Other standards related to
elektriko in magnetizmom electricity and magnetism
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61340-2-3:2016/AC:2023-
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2023
ICS 17.220.99; 29.020
English Version
Electrostatics - Part 2-3: Methods of test for determining the
resistance and resistivity of solid materials used to avoid
electrostatic charge accumulation
(IEC 61340-2-3:2016/COR1:2023)
Électrostatique - Partie 2-3: Méthodes d'essais pour la Elektrostatik - Teil 2-3: Prüfverfahren zur Bestimmung des
détermination de la résistance et de la résistivité des Widerstandes und des spezifischen Widerstandes von
matériaux solides destinés à éviter les charges festen Werkstoffen, die zur Vermeidung elektrostatischer
électrostatiques Aufladung verwendet werden
(IEC 61340-2-3:2016/COR1:2023) (IEC 61340-2-3:2016/COR1:2023)
This corrigendum becomes effective on 4 August 2023 for incorporation in the English language version of the EN.

European Committee for Electrotechnical
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61340-5-1:2024(Main)
Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements
SIST EN IEC 61340-5-1:2024

IEC 61340-5-1:2024 applies to organizations that: manufacture, process, assemble, install, package, label, service, test, inspect, transport, or otherwise handle electrical or electronic parts, assemblies and equipment with withstand voltages greater than or equal to 100 V human body model (HBM) and 200 V charge device model (CDM). Also, protection from isolated conductors is addressed by limiting the voltage on isolated conductors to less than 35 V. ESDS with lower withstand voltages can require additional control elements or adjusted limits. Processes designed to handle items that have lower ESD withstand voltage(s) can still claim compliance to this document. This document provides the requirements for an ESD control program. IEC TR 61340-5-2 provides guidance on the implementation of this document. This document does not apply to electrically initiated explosive devices, flammable liquids, gases, and powders. The purpose of this document is to provide the administrative and technical requirements for establishing, implementing, and maintaining an ESD control program (hereinafter referred to as the “program”). This edition includes the following significant technical changes with respect to the previous edition: a) definitions have been added to the document; b) updates to product qualification requirements; c) subclause 5.3.3 now includes a reference to groundable static control garment systems; d) Table 2 was replaced; e) subclause 5.3.4.2 was updated to define what an insulator is; f) subclause 5.3.4.3 was updated to include a definition for isolated conductor; g) Table 3 was updated, technical items added, including a reference to IEC 61340-5-4 for compliance verification testing; h) Table 4 was added as a summary of the requirements in IEC 61340-5-3 and to include requirements for compliance verification of packaging; i) Annex A was replaced: the former Annex is no longer required. Annex A are examples of tailoring.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61340-2-1:2015/A1:2022(Amendment)
Electrostatics - Part 2-1: Measurement methods - Ability of materials and products to dissipate static electric charge
SIST EN 61340-2-1:2016/A1:2022

This part of IEC 61340 describes test methods for measuring the rate of dissipation of static charge of insulating and static materials and products. It includes a generic description of test methods and detailed test procedures for specific applications. The two test methods for measuring charge decay time, one using corona charging and one using a charged metal plate are different and might not give equivalent results. Nevertheless, each method has a range of applications for which it is best suited. The corona charging method is suitable for evaluating the ability of materials, for example textiles, packaging, etc., to dissipate charge from their own surfaces. The charged metal plate method is suitable for evaluating the ability of materials and objects such as gloves, finger cots, hand tools, etc. to dissipate charge from conductive objects placed on or in contact with them. The charged plate method might not be suitable for evaluating the ability of materials to dissipate charge from their own surfaces. In addition to its general application, this horizontal standard is also intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 108. One of the responsibilities of a technical committee is, wherever applicable, to make use of horizontal standards in the preparation of its publications. The contents of this horizontal standard shall not apply unless specifically referred to or included in the relevant publications.

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61340-5-3:2022(Main)
Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices
SIST EN IEC 61340-5-3:2022

This part of IEC 61340 defines the ESD protective packaging properties needed to protect ESD sensitive devices (ESDS) through all phases of production, rework/maintenance, transport and storage. Test methods are referenced to evaluate packaging and packaging materials for these product and material properties. Performance limits are provided. This standard does not address protection from electromagnetic interference (EMI), electromagnetic pulsing (EMP) or protection of electrically initiated explosive materials or devices.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61340-6-1:2018(Main)
Electrostatics - Part 6-1: Electrostatic control for healthcare - General requirements for facilities
SIST EN IEC 61340-6-1:2019

IEC 61340-6-1:2018 applies to facilities that provide healthcare including hospitals, care centres and clinics. This document provides technical requirements and recommendations for controlling electrostatic phenomena in healthcare facilities, which includes requirements for equipment, materials, and products used to control static electricity. The requirements of this document do not apply to medical electrical equipment specified in IEC 60601-1 and in vitro diagnostic (IVD) medical equipment specified in IEC 61010‑2‑101.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61340-4-4:2018(Main)
Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)
SIST EN IEC 61340-4-4:2018

NEW!IEC 61340-4-4:2018 is available as IEC 61340-4-4:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61340-4-4:2018 specifies requirements for flexible intermediate bulk containers (FIBC) between 0,25 m3 and 3 m3 in volume, intended for use in hazardous explosive atmospheres. The explosive atmosphere can be created by the contents in the FIBC or can exist outside the FIBC. The requirements include: – classification and labelling of FIBC; – classification of inner liners; – specification of test methods for each type of FIBC, inner liner, labels and document pockets; – design and performance requirements for FIBC, inner liners, labels and document pockets; – safe use of FIBC (including those with inner liners) within different zones defined for explosion endangered environments, described for areas where combustible dusts are, or can be, present (IEC 60079-10-2), and for explosive gas atmospheres (IEC 60079-10-1); – procedures for type qualification and certification of FIBC, including the safe use of inner liners. This third edition cancels and replaces the second edition, published in 2012, and Amendment 1:2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) in light of experimental evidence, the maximum resistance to ground limit for Type C FIBC, and corresponding resistance limits for inner liners used in Type C FIBC has been increased from 10 M ohms to 100 M ohms; b) the classification of Type L1 inner liners has been revised and extended to include Type L1C inner liners made from multi-layer materials with a conductive internal layer; c) a labelling requirement to include a reference to IEC TS 60079-32-1 for guidance on earthing has been added.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61340-4-3:2018(Main)
Electrostatics - Part 4-3: Standard test methods for specific applications - Footwear
SIST EN IEC 61340-4-3:2018

IEC 61340-4-3:2017 describes a test method for determining the electrical resistance of footwear (shoes, slippers or booties) used in the control of electrostatic potential on people. This document is suitable for use by the manufacturer of footwear as well as the end user. A method for measuring the electrical resistance of footwear alone is described and serves as a qualification test or an acceptance test for new footwear, or as a periodic test of in-use footwear. Although this document does not include requirements for personal safety, footwear used within the scope of this document in all places of work is regulated by the relevant local statutory requirements regarding the health and safety of all persons. Insulating footwear is not included within the scope of this document although the electrical resistance measurement techniques can be applicable. This edition includes the following significant technical changes with respect to the previous edition: a) classification of footwear as electrostatic conductive or electrostatic dissipative has been removed – classification is not specified; b) environmental classes for laboratory testing have been removed – one set of conditions for pre-conditioning, conditioning and testing is specified; c) reference to IEC 61340-2-3 for measuring the resistance of the counter electrode inserted inside footwear has been removed.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61340-2-3:2016(Main)
Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation
SIST EN 61340-2-3:2016

Describes test methods for the determination of the electrical resistance and resistivity of solid materials in the range from 10K Ohm to 1T Ohm used to avoid electrostatic charge accumulation. It takes account of existing IEC/ISO standards and other published information, and gives recommendations and guidelines on the appropriate method.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61340-4-9:2016(Main)
Electrostatics - Part 4-9: Standard test methods for specific applications - Garments
SIST EN 61340-4-9:2016

IEC 61340-4-9:2016 provides test methods for evaluating the electrical resistance of garments that contain surface conductive or dissipative components or materials used in the electronics industry for the control of electrostatic discharge. This standard defines procedures for measuring electrical resistance, including a system resistance test for garments that provide a ground path for personnel. This edition includes the following significant technical changes with respect to the previous edition: a) classification of three types of garments - static control garments, - groundable static control garments, and - groundable static control garment system; b) additional measurements according to the the garment type including cuff measurements, panel to groundable point, testing with a person in the garment system; c) sleeve to sleeve measurements allowed with probes or by hanging; d) additional recommended values for new garment types as set out in Annex A.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61340-2-1:2015(Main)
Electrostatics - Part 2-1: Measurement methods - Ability of materials and products to dissipate static electric charge
SIST EN 61340-2-1:2016

IEC 61340-2-1:2015 describes test methods for measuring the rate of dissipation of static charge of insulating and static dissipative materials and products. It includes a generic description of test methods and detailed test procedures for specific applications. The two test methods for measuring charge decay time, one using corona charging and one using a charged metal plate are different and may not give equivalent results. Nevertheless, each method has a range of applications for which it is best suited. The corona charging method is suitable for evaluating the ability of materials, e.g. textiles, packaging, etc., to dissipate charge from their own surfaces. The charged metal plate method is suitable for evaluating the ability of materials and objects such as gloves, finger cots, hand tools, etc. to dissipate charge from conductive objects placed on or in contact with them. The charged plate method may not be suitable for evaluating the ability of materials to dissipate charge from their own surfaces. In addition to its general application, this horizontal standard is also intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 108. This edition includes the following significant technical changes with respect to the previous edition: a) the first edition supported requirements in IEC TR 61340-5-1, but with the revision of IEC TR 61340-5-1 into an International Standard, this support is no longer required; references to IEC 61340-5-1 have been removed; b) the introduction gives additional information on when charge decay time measurements are appropriate, and the applications for which each of the two test methods are best suited; c) procedures for performance verification of measuring instruments for the corona charging method have been added. IEC 61340-2-1:2015 has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61340-5-3:2015(Main)
Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices
SIST EN 61340-5-3:2015

IEC 61340-5-3:2015 defines the ESD protective packaging properties needed to protect electrostatic discharge sensitive devices (ESDS) through all phases of production, rework/maintenance, transport and storage. Test methods are referenced to evaluate packaging and packaging materials for these product and material properties. Performance limits are provided. This standard does not address protection from electromagnetic interference (EMI), electromagnetic pulsing (EMP) or protection of volatile materials. This edition includes the following significant technical changes with respect to the previous edition: a) removal of all references to ANSI/ESD STM11.13, replaced by normative reference IEC 61340-4-10; b) additional notes added to Table 1; c) addition of a new Table 3 related to the "ESD classification symbol" and the "primary function code".

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day