EN 50090-9-1:2004

Home and Building Electronic Systems (HBES) - Part 9-1: Installation requirements - Generic cabling for HBES Class 1 Twisted Pair

This standard provides common rules for the planning and engineering as well as installation of HBES cabling systems taking into account the layout of the cable support, cables and connectors, and the commissioning of HBES. It applies to HBES networks installed according to the legal boundaries of the electrical utilities additionally. The assessment of an installation shall be based on this standard and CLC/TS 50090-9-2. Rules for co-existence of HBES Class 1 cabling with mains power, and other networks (i.e. those covered by EN 50173 series, EN 50174 series, EN 50083 series) are also specified. This part of EN 50090 recommends one specific implementation but allows any solution which supports the required HBES functionality without disturbing, or being disturbed by, other application systems or networks. This part of EN 50090 is also intended as a predisposition and pre-cabling guide-line for Twisted Pair Class 1. This document concerns only HBES Class 1 application supported by Twisted Pair (TP) media, and coexistence with HBES Class 2 (Class 1 plus simple voice and stable picture transmission), HBES Class 3 (Class 2 plus complex video transfers, e.g. CAT V, and IT) and power networks. Network coexistence is ensured by infrastructure (see 5.2) and installation requirements. This document applies specifically to the installation of copper cables. Power line carrier, and optical fibre communication are outside the scope of this document. The environmental conditions of EN 50090-2-2 apply to enclosure, connectors and generally to all Twisted Pair HBES devices of the installation.

Elektrische Systemtechnik für Heim und Gebäude (ESHG) - Teil 9-1: Installationsanforderungen - Verkabelung von Zweidrahtleitungen ESHG Klasse 1

Systèmes électroniques pour les foyers domestiques et les bâtiments (HBES) - Partie 9-1: Spécifications d'installation - Câblage générique pour paire torsadée Classe 1

Stanovanjski in stavbni elektronski sistemi (HBES) – 9-1. del: Inštalacijske zahteve – Upravljalni proces – Splošno pokabljenje za HBES razreda 1, zviti par

General Information

• Status: Withdrawn
• Publication Date: 27-May-2004
• ICS: 97.120 - Automatic controls for household use
• Technical Committee: CLC/TC 205 - Home and Building Electronic Systems (HBES)
• Drafting Committee: ISO/IEC/JTC 1/SC25 - ISO/IEC_JTC_1/SC25
• Parallel Committee: ISOIEC/JTC 1/SC25 - ISOIEC_JTC_1/SC25
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 01-Feb-2017
• Ref Project: SIST EN 50090-9-1:2005 - Home and Building Electronic Systems (HBES) -- Part 9-1: Installation requirements - Generic cabling for HBES Class 1 Twisted Pair

Standards Content (Sample)

SLOVENSKI SIST EN 50090-9-1:2005

STANDARD
september 2005
Stanovanjski in stavbni elektronski sistemi (HBES) – 9-1. del: Inštalacijske
zahteve – Upravljalni proces – Splošno pokabljenje za HBES razreda 1, zviti
par
Home and Building Electronic Systems (HBES) – Part 9-1: Installation requirements
– Generic cabling for HBES Class 1 Twisted Pair
ICS 97.120 Referenčna številka
SIST EN 50090-9-1:2005(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 50090-9-1
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2004

ICS 97.120


English version


Home and Building Electronic Systems (HBES)
Part 9-1: Installation requirements -
Generic cabling for HBES Class 1 Twisted Pair


Systèmes électroniques pour les foyers Elektrische Systemtechnik für Heim
domestiques et les bâtiments (HBES) und Gebäude (ESHG)
Partie 9-1: Spécifications d'installation - Teil 9-1: Installationsanforderungen -
Câblage générique pour paire torsadée Verkabelung von Zweidrahtleitungen
Classe 1 ESHG Klasse 1






This European Standard was approved by CENELEC on 2003-12-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 50090-9-1:2004 E

---------------------- Page: 2 ----------------------

EN 50090-9-1:2004 - 2 -
Foreword
This European Standard was prepared by Technical Committee CENELEC TC 205, Home and
Building Electronic Systems (HBES).
The text of the draft was submitted to the formal vote and was approved by CENELEC as
EN 50090-9-1 on 2003-12-01.
The following dates were fixed:

- latest date by which the EN has to be implemented
 at national level by publication of an identical
 national standard or by endorsement (dop) 2004-12-01

- latest date by which the national standards conflicting
 with the EN have to be withdrawn (dow) 2006-12-01

EN 50090-9-1 is part of the EN 50090 series of Eur opean Standards, which will comprise the
following parts:
Part 1: Standardization structure
Part 2: System overview
Part 3: Aspects of application
Part 4: Media independent layers
Part 5: Media and media dependent layers
Part 6: Interfaces
Part 7: System management
Part 8: Conformity assessment of products
Part 9: Installation requirements
TRs CENELEC TC 205 technical reports

---------------------- Page: 3 ----------------------

- 3 - EN 50090-9-1:2004
Contents
Introduction. 5
1 Scope . 5
2 Normative references . 5
3 Definitions and abbreviations . 7
3.1 Definitions .7
3.2 Abbreviations.11
4 Aspects of system and cabling.11
5 Cabling model and general requirements.12
5.1 Connection of segments, general requirements .
...