Optical fibre cables - Part 5–10: Family specification - Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing

IEC 60794-5-10:2014 is a family specification that covers outdoor microduct optical fibre cables for installation by blowing and the associated microducts, which together make up a microduct optical fibre cable system. Although primarily designed for use with outdoor microduct applications, the cable products specified herein may be used individually for short lengths in other applications as agreed upon between supplier and customer. These may include short runs inside a building or in other outdoor applications, such as a transition between separate (unconnected) microduct systems, or from a microduct system to some other protective structure such as a cable conduit or tray. Systems built with components covered by this standard are subject to the requirements of IEC 60794-5 where applicable. Keywords: outdoor microduct optical fibre cables, installation by blowing

Lichtwellenleiterkabel - Teil 5-10: Familienspezifikation für Mikrorohr-Lichtwellenleiterkabel, Mikrorohre und geschützte Mikrorohre zur Installation durch Einblasen für die Anwendung im Freien

Câbles à fibres optiques - Partie 5–10: Spécification de famille - Câbles extérieurs à fibres optiques en micro-conduit, micro-conduits et micro-conduits protégés pour installation par soufflage

IEC 60794-5-10:2014 est une spécification de famille qui couvre les câbles extérieurs à fibres optiques en micro-conduit destinés à être installés par soufflage, et les micro-conduits associés, constituant ensemble un système de câbles à fibres optiques en micro-conduit. Bien qu'ils soient principalement conçus pour être utilisés avec des applications pour micro-conduit extérieur, les produits câbles ici spécifiés peuvent être utilisés individuellement sur de courtes longueurs dans d'autres applications, après accord entre le fournisseur et le client. Ceux-ci peuvent inclure de courtes longueurs à l'intérieur d'un bâtiment ou dans d'autres applications à l'extérieur, telles qu'une transition entre des systèmes de micro-conduits séparés (non connectés), ou un système de micro-conduit vers une autre structure protectrice telle qu'un conduit ou un chemin de câble. Les systèmes intégrant des éléments couverts par la présente norme sont soumis aux exigences de l'IEC 60794-5, le cas échéant. Mots clés: câbles extérieurs à fibres optiques en micro-conduit, installés par soufflage

Optični kabli - 5-10. del: Skupinska specifikacija za mikrokanale optičnih kablov za uporabo na prostem, mikrokanale in zaščitene mikrokanale za vgradnjo z vpihovanjem (IEC 60794-5-10:2014)

Standard EN-IEC 60794-5-10 je skupinska specifikacija, ki zajema mikrokanale optičnih kablov za uporabo na prostem, za gradnjo z vpihovanjem in sorodne mikrokanale, ki skupaj sestavljajo sistem optičnih kablov za uporabo na prostem. Čeprav so tukaj navedeni kabelski izdelki načrtovani predvsem za uporabo z mikrokanali za zunanjo uporabo, se lahko uporabljajo posamezno za krajše razdalje za druge namene, kot je dogovorjeno med dobaviteljem in stranko. To lahko zajema kratke razdalje v zgradbah ali pri zunanji uporabi, npr. pri prehodu med ločenim (nepovezanim) sistemom mikrokanalov, ali od sistema mikrokanalov do nekaterih zaščitnih struktur, kot so kabelske zaščitne cevi ali police. Za sisteme, zgrajene s komponentami, ki so zajeti v tem standardu, veljajo zahteve standarda IEC 60794-5, kjer je to primerno. Dodatek A zajema primere optičnih kablov za uporabo na prostem in mikrokanalov. Dodatek B opisuje okvirno podrobno specifikacijo za mikrokanale optičnih kablov za uporabo na prostem in povezane mikrokanale ter podaja nekatere minimalne zahteve. Podrobna specifikacija izdelka se lahko pripravi na osnovi te skupinske specifikacije z uporabo dodatka B kot vodnika. Dodatek C ponuja normativne zahteve za mikrokanale optičnih kablov. Na parametre, navedene v tem standardu, lahko vpliva merilna negotovost, ki se pojavi zaradi merilnih napak ali napak umerjanja zaradi pomanjkanja ustreznih standardov. Kriterije sprejemljivosti bi morali obravnavati ob upoštevanju teh pomislekov. Število preskušenih vlaken in mikrokanalov mora biti reprezentativno za načrtovanje mikrokanalov optičnih kablov in bi moralo biti dogovorjeno med stranko in dobaviteljem.

General Information

Status
Published
Publication Date
17-Apr-2014
Withdrawal Date
11-Mar-2017
Current Stage
6060 - Document made available - Publishing
Start Date
18-Apr-2014
Completion Date
18-Apr-2014

Buy Standard

Standard
EN 60794-5-10:2014 - BARVE
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Optical fibre cables - Part 5-10: Family specification for outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing33.180.10Fibres and cablesICS:Ta slovenski standard je istoveten z:EN 60794-5-10:2014SIST EN 60794-5-10:2014en01-junij-2014SIST EN 60794-5-10:2014SLOVENSKI
STANDARD
EUROPEAN STANDARD EN 60794-5-10 NORME EUROPÉENNE
EUROPÄISCHE NORM April 2014
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2014 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60794-5-10:2014 E
ICS 33.180.01; 33.180.10
English version
Optical fibre cables -
Part 5–10: Family specification -
Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing (IEC 60794-5-10:2014)
Câbles à fibres optiques -
Partie 5–10: Spécification de famille -
Câbles extérieurs à fibres optiques en micro-conduit, micro-conduits et micro-conduits protégés pour installation par soufflage (CEI 60794-5-10:2014)
Lichtwellenleiterkabel -
Teil 5-10: Familienspezifikation für Mikrorohr-Lichtwellenleiterkabel, Mikrorohre und geschützte Mikrorohre zur Installation durch Einblasen für die Anwendung im Freien (IEC 60794-5-10:2014)
This European Standard was approved by CENELEC on 2014-03-12. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Foreword The text of document 86A/1496/CDV, future edition 1 of IEC 60794-5-10, prepared by SC 86A "Fibres and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60794-5-10:2014.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-12-12 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2017-03-12
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 60794-5-10:2014 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60794-1-21 NOTE Harmonized as EN 60794-1-21. IEC 60811-501 NOTE Harmonized in EN 60811-501. SIST EN 60794-5-10:2014

- 3 - EN 60794-5-10:2014 Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60304 - Standard colours for insulation for low-frequency cables and wires HD 402 S2 -
IEC 60793-1-40 (mod) - Optical fibres -
Part 1-40: Measurement methods and test procedures - Attenuation EN 60793-1-40 -
IEC 60793-2-10 - Optical fibres -
Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres EN 60793-2-10 -
IEC 60793-2-50 - Optical fibres -
Part 2-50: Product specifications - Sectional specification for class B single-mode fibres EN 60793-2-50 -
IEC 60794-1 - Optical fibre cables -
Part 1: Generic specification - -
IEC 60794-1-1
- Optical fibre cables -
Part 1-1: Generic specification - General EN 60794-1-1 -
IEC 60794-1-2 - Optical fibre cables -
Part 1-2: Generic specification - Cross reference table for optical cable test procedures EN 60794-1-2 -
IEC 60794-1-22 2012 Optical fibre cables -
Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods EN 60794-1-22 2012
IEC 60794-1-23 - Optical fibre cables -
Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods EN 60794-1-23 -
IEC 60794-1-24 - Optical fibre cables -
Part 1-24: Generic specification - Basic optical cable test procedures - Electrical test methods EN 60794-1-24 -
IEC 60794-2 - Optical fibre cables -
Part 2: Indoor cables - Sectional specification EN 60794-2 -
IEC 60794-3 - Optical fibre cables -
Part 3: Sectional specification - Outdoor cables EN 60794-3
IEC 60794-4 - Optical fibre cables -
Part 4: Sectional specification - Aerial optical cables along electrical power lines EN 60794-4 -
IEC 60794-5 - Optical fibre cables -
Part 5: Sectional specification - Microduct cabling for installation by blowing EN 60794-5 -
Part 5-20: Family specification for outdoor microduct fibre units, microducts and protected microducts for installation by blowing EN 60794-5-20 -
IEC 60811-202 - Electric and optical fibre cables - Test methods for non-metallic materials -
Part 202: General tests - Measurement of thickness of non-metallic sheath EN 60811-202 -
IEC 60811-203 - Electric and optical fibre cables - Test methods for non-metallic materials -
Part 203: General tests - Measurement of overall dimensions EN 60811-203 -
IEC 60811-601 - Electric and optical fibre cables - Test methods for non-metallic materials -
Part 601: Physical tests - Measurement of the drop point of filling compounds EN 60811-601 -
IEC 60811-602 - Electric and optical fibre cables - Test methods for non-metallic materials -
Part 602: Physical tests - Separation of oil in filling compounds EN 60811-602 -
IEC 60811-604 - Electric and optical fibre cables - Test methods for non-metallic materials -
Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds EN 60811-604 -
ISO/IEC 11801
- Information technology - Generic cabling for customer premises EN ISO/IEC 11801 -
IEC 60794-5-10
Edition 1.0 2014-02 INTERNATIONAL STANDARD NORME INTERNATIONALE Optical fibre cables – Part 5–10: Family specification – Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing
Câbles à fibres optiques – Partie 5–10: Spécification de famille – Câbles extérieurs à fibres optiques en micro-conduit, micro-conduits et micro-conduits protégés pour installation par soufflage
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE V ICS 33.180.01, 33.180.10 PRICE CODE CODE PRIX ISBN 978-2-8322-1374-2
– 2 – 60794-5-10 © IEC:2014 CONTENTS
FOREWORD . 5 1 Scope . 7 2 Normative references . 7 3 Symbols . 8 4 General requirements . 9 4.1 Construction . 9
General . 9 4.1.1 Microduct optical fibre cables. 10 4.1.2 Microduct . 10 4.1.3 Protected microduct . 10 4.1.4 Microduct fittings . 10 4.1.5 Microduct hardware . 11 4.1.64.2 Optical fibres . 11 4.3 Installation performance tests . 11
Installation conditions . 11 4.3.1 Tests applicable . 11 4.3.24.4 Mechanical and environmental tests . 12 5 Microduct optical fibre cable . 12 5.1 Tests applicable . 12 5.2 Tensile performance . 12 5.3 Crush . 13 5.4 Impact . 13 5.5 Repeated bending . 13 5.6 Torsion . 13 5.7 Kink . 14 5.8 Bend . 14 5.9 Temperature cycling . 14 5.10 Water penetration . 15 5.11 Ageing . 15 5.12 Ribbon strippability . 15 5.13 Fibre ribbon separability. 15 6 Microduct. 15 6.1 Tests applicable . 15 6.2 Tensile performance . 16 6.3 Crush . 16 6.4 Impact . 16 6.5 Repeated bending . 16 6.6 Torsion . 17 6.7 Kink . 17 6.8 Bend . 17 6.9 Microduct route verification test . 17 6.10 Microduct pressure withstand . 17 6.11 Ageing . 18 7 Protected microduct(s) . 18 SIST EN 60794-5-10:2014

60794-5-10 © IEC:2014 – 3 –
7.1 Tests applicable . 18 7.2 Tensile performance . 18 7.3 Crush . 19 7.4 Impact . 19 7.5 Repeated bending . 19 7.6 Kink . 19 7.7 Bend . 20 7.8 Microduct route verification test . 20 7.9 Microduct pressure withstand . 20 7.10 Ageing .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.