EN IEC 62841-4-5:2021

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-5: Particular requirements for grass shears

IEC 62841-4-5:2021 This document applies to grass shears with a maximum cutting width of 200 mm designed primarily for cutting grass. This document does not apply to hedge trimmers. Hedge trimmers are covered by IEC 62841-4-2.

Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 4-5: Besondere Anforderungen für Grasscheren

Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 4-5: Exigences particulières pour les cisailles à gazon

IEC 62841-4-5:2021 Le présent document s'applique aux cisailles à gazon d'une largeur de coupe maximale de 200 mm, conçues principalement pour la tonte du gazon. Le présent document ne s'applique pas aux taille-haies. Les taille-haies sont couverts par l'IEC 62841-4-2.

Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 4-5. del: Posebne zahteve za škarje za travo

Ta dokument se uporablja za škarje za travo z največjo širino rezanja 200 mm, ki so zasnovane predvsem za rezanje trave.
Ta dokument se ne uporablja za škarje za živo mejo.
OPOMBA 101: Škarje za živo mejo so zajete v standardu IEC 62841-4-2.

General Information

• Status: Published
• Publication Date: 28-Oct-2021
• ICS: 25.140.20 - Electric tools
• Technical Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Drafting Committee: IEC/TC 116 - Safety of hand-held motor-operated electric tools
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 29-Oct-2021
• Completion Date: 29-Oct-2021
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN IEC 62841-4-5:2022 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-5: Particular requirements for grass shears

Relations

• Amended By: EN IEC 62841-4-5:2021/A11:2021 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-5: Particular requirements for grass shears
• Effective Date: 24-Dec-2019
• Corrected By: EN IEC 62841-4-5:2021/AC:2024-01 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-5: Particular requirements for grass shears
• Effective Date: 16-Jan-2024

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62841-4-5:2022
01-februar-2022
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 4-
5. del: Posebne zahteve za škarje za travo
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 4-5: Particular requirements for grass shears
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und
Rasen- und Gartenmaschinen – Sicherheit – Teil 4-5: Besondere Anforderungen für
Grasscheren
Ta slovenski standard je istoveten z: EN IEC 62841-4-5:2021
ICS:
25.140.20 Električna orodja Electric tools
65.060.70 Vrtnarska oprema Horticultural equipment
SIST EN IEC 62841-4-5:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62841-4-5:2022

---------------------- Page: 2 ----------------------
SIST EN IEC 62841-4-5:2022


EUROPEAN STANDARD EN IEC 62841-4-5

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2021
ICS 25.140.20

English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 4-5: Particular
requirements for grass shears
(IEC 62841-4-5:2021)
Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,
pour jardins et pelouses - Sécurité - Partie 4-5: Exigences transportable Werkzeuge und Rasen- und
particulières pour les cisailles à gazon Gartenmaschinen - Sicherheit - Teil 4-5: Besondere
(IEC 62841-4-5:2021) Anforderungen für Grasscheren
(IEC 62841-4-5:2021)
This European Standard was approved by CENELEC on 2021-09-28. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62841-4-5:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62841-4-5:2022
EN IEC 62841-4-5:2021 (E)
European foreword
The text of document 116/495/FDIS, future edition 1 of IEC 62841-4-5, prepared by IEC/TC 116
"Safety of motor-operated electric tools" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 62841-4-5:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-06-28
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-09-28
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association, and supports essential
requirements of EU Directive(s) / Regulation(s).
For the relationship with EU Directive(s) / Regulation(s), see informative Annex ZZ, which is an
integral part of EN IEC 62841-4-5:2021/A11:2021.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62841-4-5:2021 was approved by CENELEC as a
European Standard without any modification.
2

---------------------- Page: 4 ----------------------
SIST EN IEC 62841-4-5:2022



IEC 62841-4-5

®


Edition 1.0 2021-08




INTERNATIONAL



STANDARD
...